Amphenol ICC 68015-236 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68015-236 is a rectangular connector header featuring a right-angle, through-hole mount configuration with 36 positions at 0.100" (2.54mm) pitch. This connector is part of the BERGSTIK® II series and is classified as obsolete. Due to its obsolete status and limited availability in new production, identifying equivalent substitute parts is essential for ongoing system maintenance, repair, and redesign applications where this connector type is specified.

Substiute Parts

68015-236

Amphenol ICC (FCI)In Stock: 88968015-236 Datasheet

Current PartRFQ

4-103765-0

TE Connectivity AMP ConnectorsIn Stock: 9274-103765-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Amphenol ICC 68015-236 is determined by the following critical parameters:

• Pitch - Mating: 0.100" (2.54mm) — must match exactly for mechanical compatibility
• Connector Type: Header with male pin contacts — determines mating interface
• Mounting Type: Through Hole, Right Angle — required for PCB integration
• Termination: Solder — specifies connection method
• Current Rating: 3A per Contact — electrical capacity requirement
• Fastening Type: Push-Pull — mechanical engagement mechanism
• Material Flammability Rating: UL94 V-0 — safety compliance

The TE Connectivity AMP Connectors 4-103765-0 qualifies as a substitute based on matching these core parameters. However, the substitute part features 40 positions compared to the original 36 positions, which represents a functional extension rather than a direct one-to-one replacement. This difference must be evaluated within the context of the specific application.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 4-103765-0 meets the core electrical and mechanical substitution criteria for the Amphenol ICC 68015-236. Both connectors share identical pitch, mounting configuration, termination method, current rating, and flammability compliance. Both parts are classified as obsolete, indicating limited future availability.

Key considerations for selection:

• Position Count Difference: The substitute provides 40 positions versus 36 positions. Applications requiring exactly 36 positions must account for the additional 4 positions in PCB layout and mating connector design.
• Insulation Height: The substitute features a higher insulation height (0.138" vs. 0.095"), which may affect board-to-board spacing in constrained designs.
• Contact Finish Thickness: The substitute provides thicker gold plating (30.0µin vs. 15.0µin), offering enhanced durability and contact reliability.
• Contact Material: The substitute uses Copper Alloy versus Phosphor Bronze, with equivalent electrical performance for the specified 3A current rating.
• Operating Temperature: The substitute specifies an operating range of -65°C to 105°C, whereas the original part does not specify this parameter.
• Compliance Status: Both parts are RoHS non-compliant and carry identical MSL ratings.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 4-103765-0 be used as a direct replacement for the Amphenol ICC 68015-236?

A: The TE Connectivity 4-103765-0 is functionally compatible based on pitch, mounting type, termination, and current rating. However, the 40-position configuration differs from the original 36-position design. Direct substitution requires verification that the additional 4 positions do not conflict with the mating connector or PCB layout.

Q: What are the critical parameters that must match for substitution?

A: Pitch (0.100" / 2.54mm), connector type (header with male pins), mounting configuration (through-hole, right-angle), termination method (solder), current rating (3A), and fastening mechanism (push-pull) must all match. Deviations in these parameters prevent mechanical or electrical compatibility.

Q: Does the difference in insulation height affect compatibility?

A: The substitute's higher insulation height (0.138" vs. 0.095") may impact board-to-board spacing and clearance in applications with tight vertical constraints. PCB layout and mating connector specifications must be reviewed to confirm adequate clearance.

Q: Are there compliance or regulatory differences between these parts?

A: Both parts are RoHS non-compliant and carry identical Moisture Sensitivity Level (MSL) ratings of 1 (Unlimited). Both meet UL94 V-0 flammability requirements. The substitute provides an operating temperature range specification (-65°C to 105°C) not listed for the original part.

Q: What is the significance of the thicker gold plating on the substitute?

A: The TE Connectivity part features 30.0µin (0.76µm) gold plating compared to 15.0µin (0.38µm) on the original. Thicker plating generally provides improved contact durability, reduced wear, and enhanced corrosion resistance over the connector's operational life.

Q: Can the substitute be used in applications requiring exactly 36 positions?

A: The 40-position configuration can accommodate 36-position applications if the mating connector is designed to interface with 36 of the 40 available positions. However, this requires explicit verification of mating connector compatibility and PCB routing to avoid unintended contact engagement.