Amphenol ICC 68002-136H Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68002-136H is a rectangular connector header for through-hole mounting with 36 positions at 0.100" (2.54mm) pitch. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The BERGSTIK® II series connector features male pins with solder termination, square contact geometry, and gold plating suitable for board-to-board applications requiring 3A current capacity per contact.

Key Parameters

Parameter	Value
Manufacturer Part Number	68002-136H
Manufacturer	Amphenol ICC (FCI)
Category	Rectangular Connectors
Connector Type	Header
Contact Type	Male Pin
Number of Positions	36
Pitch - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Contact Shape	Square
Contact Finish - Mating	Gold or Gold, GXT™
Current Rating	3A
Operating Temperature	-65°C ~ 130°C
Material Flammability Rating	UL94 V-0
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution for the 68002-136H is determined by the following critical parameters that must remain constant:

Connector type: Header with male pins
Number of positions: 36
Pitch: 0.100" (2.54mm)
Mounting: Through hole with solder termination
Current rating: 3A minimum
Material flammability: UL94 V-0
Fastening type: Push-Pull

Substitute parts are grouped into two categories:

Category 1: Direct Amphenol ICC Substitutes The 68002-136HLF is the active production equivalent from Amphenol ICC, maintaining identical electrical and mechanical specifications while offering RoHS compliance and active product status.

Category 2: Cross-Manufacturer Alternatives Preci-Dip 350 series, TE Connectivity AMPMODU Mod II, and Sullins Connector Solutions parts meet the core functional requirements of 36-position, 2.54mm pitch headers with solder termination and 3A current capacity. These alternatives differ in contact geometry (circular vs. square), contact finish composition, and operating temperature ranges, but remain electrically and mechanically compatible for board-to-board applications.

Parameter Comparison

Parameter	68002-136H	68002-136HLF	350-10-136-00-006101	350-80-136-00-006101	350-V3-136-00-006101	8-146274-6	PGC36SAAN
Manufacturer	Amphenol ICC	Amphenol ICC	Preci-Dip	Preci-Dip	Preci-Dip	TE Connectivity	Sullins
Number of Positions	36	36	36	36	36	36	36
Pitch - Mating	0.100"	0.100"	0.100"	0.100"	0.100"	0.100"	0.100"
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Contact Shape	Square	Square	Circular	Circular	Circular	Square	Square
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating	3A	3A	3A	3A	3A	3A	3A
Operating Temperature	-65°C ~ 130°C	-65°C ~ 130°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-65°C ~ 105°C	Not specified
Contact Finish - Mating	Gold or Gold, GXT™	Gold or Gold, GXT™	Gold	Tin	Gold	Tin	Gold
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	Non-compliant	Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Primary Recommendation: 68002-136HLF

The 68002-136HLF is the direct active production substitute from Amphenol ICC. It maintains identical electrical and mechanical specifications to the 68002-136H while offering RoHS compliance and active product status. This part is the preferred choice for designs requiring minimal qualification effort and maximum compatibility with existing PCB layouts and mating connectors.

Secondary Recommendations: Preci-Dip 350 Series

The Preci-Dip 350 series (350-10-136-00-006101, 350-10-136-00-013101, 350-10-136-01-666101, 350-80-136-00-006101, 350-80-136-00-013101, 350-80-136-01-666101, 350-V3-136-00-006101) provides active alternatives with ROHS3 compliance. These parts feature circular contact geometry instead of square, which affects mating interface compatibility. Selection among these variants depends on contact finish requirements (gold vs. tin) and termination method (solder only vs. press-fit and solder). Operating temperature range is reduced to -55°C ~ 125°C compared to the original -65°C ~ 130°C specification.

Tertiary Recommendation: TE Connectivity 8-146274-6

The TE Connectivity AMPMODU Mod II 8-146274-6 maintains square contact geometry and solder termination with RoHS compliance and active status. This part features tin plating and operates within -65°C ~ 105°C, providing the widest low-temperature capability among alternatives. The higher contact finish thickness (100.0µin) and different insulation material (LCP vs. standard thermoplastic) may require design verification for specific applications.

Alternative: Sullins PGC36SAAN

The Sullins Connector Solutions PGC36SAAN offers ROHS3 compliance with square contact geometry and gold plating. This part maintains compatibility with the original contact shape and finish type. Operating temperature specification is not provided in available documentation.

Frequently Asked Questions (FAQ)

Q: Can I directly replace 68002-136H with 68002-136HLF without PCB modification?

A: Yes. The 68002-136HLF is the direct Amphenol ICC production equivalent with identical pin configuration, pitch, and mounting footprint. No PCB layout changes are required.

Q: What is the primary difference between Preci-Dip 350 series variants?

A: The 350 series variants differ in contact finish (gold vs. tin) and termination method. The 350-10 and 350-80 variants use solder termination only, while 350-10-136-01-666101 and 350-80-136-01-666101 support both press-fit and solder termination. The 350-V3 variant uses gold mating finish with tin post finish. Contact geometry is circular across all 350 variants, differing from the square geometry of the original part.

Q: Are there temperature limitations when substituting with Preci-Dip or TE Connectivity parts?

A: Yes. The original 68002-136H operates from -65°C to 130°C. Preci-Dip 350 series parts operate from -55°C to 125°C, and TE Connectivity 8-146274-6 operates from -65°C to 105°C. Verify that your application requirements fall within the substitute part's operating range.

Q: Does contact shape (square vs. circular) affect electrical performance?

A: Contact shape does not affect electrical performance for the specified 3A current rating. However, circular contacts in Preci-Dip parts may have different mating force characteristics and contact resistance profiles compared to square contacts. Mechanical compatibility with mating connectors must be verified.

Q: Which substitute part offers the best RoHS compliance status?

A: All active substitute parts listed (68002-136HLF, Preci-Dip 350 series, TE Connectivity 8-146274-6, and Sullins PGC36SAAN) offer RoHS compliance. The original 68002-136H is RoHS non-compliant. For new designs, any of the active alternatives satisfy RoHS requirements.

Q: Can I mix contact finishes (gold vs. tin) in the same connector assembly?

A: Contact finish selection should be consistent within a mating pair to avoid galvanic corrosion and ensure predictable contact resistance. Select substitute parts with matching finish specifications to the mating connector.

Q: What is the difference between ROHS3 and RoHS Compliant designations?

A: Both designations indicate compliance with RoHS directives. ROHS3 refers to compliance with the most recent RoHS 3 directive (2011/65/EU as amended). Both are acceptable for current regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message