Amphenol ICC 68001-605 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68001-605 is a rectangular connector header featuring a vertical through-hole mount configuration with 5 positions at 0.100" (2.54mm) pitch. This connector is part of the BERGSTIK® II series and is designed for board-to-board applications with solder termination. The part is currently in active production status. Substitute parts may be required due to inventory constraints, design revisions, or application-specific requirements that demand alternative connector configurations or manufacturer options.

Substiute Parts

68001-605

Amphenol ICC (FCI)In Stock: 121568001-605 Datasheet

Current PartRFQ

4-103185-0

TE Connectivity AMP ConnectorsIn Stock: 15934-103185-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Amphenol ICC 68001-605 is determined by the following critical parameters:

• Pitch - Mating: 0.100" (2.54mm) — must remain constant for mechanical compatibility
• Contact Type: Male Pin — determines mating interface requirements
• Mounting Type: Through Hole — establishes PCB assembly method
• Termination: Solder — specifies connection method to PCB
• Current Rating: 3A per Contact — ensures electrical performance adequacy
• Operating Temperature Range: -65°C ~ 125°C — defines thermal operating envelope
• Material Flammability Rating: UL94 V-0 — establishes safety compliance baseline

The substitute part TE Connectivity AMP Connectors 4-103185-0 shares the core electrical and mechanical parameters (pitch, contact type, mounting, termination, current rating, and flammability rating) necessary for functional equivalence. However, this part differs in position count (40 positions versus 5 positions) and product status (Obsolete versus Active), which may affect long-term availability and design considerations.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: The Amphenol ICC 68001-605 is recommended for new designs and applications requiring active product status with ongoing manufacturer support and extended temperature operation to 125°C.

Substitute Consideration: The TE Connectivity AMP Connectors 4-103185-0 may be selected as an alternative when the following conditions are met:

• Application operating temperature does not exceed 105°C
• Design can accommodate the 40-position breakaway header configuration, with unused positions left unpopulated or mechanically separated
• Obsolete product status is acceptable for the application lifecycle
• Copper alloy contact material meets electrical performance requirements

The substitute part maintains electrical and mechanical compatibility through matched pitch, contact type, mounting method, termination, current rating, and flammability certification. The primary differentiators are position count flexibility, operating temperature range, and product lifecycle status.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 4-103185-0 directly replace the Amphenol ICC 68001-605 in existing designs?

A: Direct replacement is possible from an electrical and mechanical standpoint due to matched pitch (0.100"), contact type (Male Pin), mounting (Through Hole), and current rating (3A). However, the substitute offers 40 positions versus 5 positions. The breakaway feature of the substitute allows configuration to match the 5-position requirement. Verify that the application operating temperature does not exceed 105°C, as the substitute has a lower maximum temperature rating.

Q: What is the significance of the breakaway feature on the TE Connectivity part?

A: The breakaway feature allows the 40-position header to be mechanically separated into smaller segments. This enables the part to be configured for applications requiring fewer positions, including 5-position configurations. Breakaway sections maintain the same pitch and electrical characteristics as the full assembly.

Q: Are there differences in contact finish that affect compatibility?

A: The Amphenol ICC 68001-605 uses Gold or Gold, GXT™ finish, while the TE Connectivity 4-103185-0 uses standard Gold finish. Both finishes provide adequate corrosion resistance and electrical conductivity for the 3A current rating. The GXT™ finish on the main part offers enhanced durability; however, standard gold finish on the substitute is suitable for most applications.

Q: How does the operating temperature difference impact substitution?

A: The Amphenol ICC 68001-605 operates from -65°C to 125°C, while the TE Connectivity 4-103185-0 operates from -65°C to 105°C. If the application requires sustained operation above 105°C, the substitute is not suitable. For applications with maximum operating temperatures at or below 105°C, the substitute is acceptable.

Q: What is the impact of the product status difference?

A: The Amphenol ICC 68001-605 is in Active status, indicating ongoing production and manufacturer support. The TE Connectivity 4-103185-0 is Obsolete, meaning production has ended. For long-term production runs or designs with extended lifecycles, the active part is preferred. The obsolete part may have limited availability and no future design improvements or support.

Q: Are the contact materials interchangeable?

A: The Amphenol ICC 68001-605 uses Phosphor Bronze contacts, while the TE Connectivity 4-103185-0 uses Copper Alloy contacts. Both materials are suitable for the 3A current rating and provide adequate electrical performance. Phosphor Bronze offers slightly higher spring force retention; however, Copper Alloy is functionally equivalent for this application.