Amphenol ICC 68001-236 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68001-236 is a rectangular connector header with 36 vertical positions at 2.54mm pitch, designed for through-hole board-to-board applications. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. The BERGSTIK® II series connector features male pins with gold-plated mating contacts and phosphor bronze material construction, rated for 3A per contact across an operating temperature range of -65°C to 125°C.

Key Parameters

Parameter	Value
Manufacturer Part Number	68001-236
Manufacturer	Amphenol ICC (FCI)
Category	Rectangular Connectors
Connector Type	Header
Contact Type	Male Pin
Number of Positions	36
Pitch - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Current Rating	3A per Contact
Operating Temperature	-65°C ~ 125°C
Material Flammability Rating	UL94 V-0
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution for the 68001-236 is determined by the following critical parameters that must remain constant:

Number of Positions: 36
Pitch - Mating: 0.100" (2.54mm)
Connector Type: Header
Contact Type: Male Pin
Mounting Type: Through Hole
Termination: Solder
Current Rating: 3A per Contact
Material Flammability Rating: UL94 V-0

Substitute parts are grouped into two categories:

Category 1: Direct Amphenol ICC Equivalent The 68001-236HLF is the active production equivalent from the same manufacturer and series. This part maintains identical electrical and mechanical specifications while offering improved RoHS compliance and higher inventory availability.

Category 2: Preci-Dip 350 Series Alternatives Six Preci-Dip parts (350-10-136-00-006101, 350-10-136-00-013101, 350-10-136-01-666101, 350-80-136-00-006101, 350-80-136-00-013101, 350-80-136-01-666101, 350-V3-136-00-006101) meet the core functional requirements of 36 positions at 2.54mm pitch with equivalent current and temperature ratings. These parts differ in contact geometry (circular vs. square), contact finish (gold or tin), and insulation material composition, but maintain functional compatibility for the specified electrical parameters.

Category 3: TE Connectivity AMPMODU Mod II Series The 8-146274-6 represents an alternative from a different manufacturer series, maintaining the 36-position, 2.54mm pitch configuration with equivalent current and temperature ratings. This part features different contact geometry and insulation material but provides functional equivalence for the core application requirements.

Parameter Comparison

Parameter	68001-236 (Main)	68001-236HLF	350-10-136-00-006101	350-80-136-00-006101	350-V3-136-00-006101	8-146274-6
Manufacturer	Amphenol ICC	Amphenol ICC	Preci-Dip	Preci-Dip	Preci-Dip	TE Connectivity
Series	BERGSTIK® II	BERGSTIK® II	350	350	350	AMPMODU Mod II
Product Status	Obsolete	Active	Active	Active	Active	Active
Number of Positions	36	36	36	36	36	36
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Contact Shape	Square	Square	Circular	Circular	Circular	Square
Contact Material	Phosphor Bronze	Phosphor Bronze	Brass	Brass	Brass	Copper Alloy
Contact Finish - Mating	Gold or Gold, GXT™	Gold or Gold, GXT™	Gold	Tin	Gold	Tin
Contact Finish Thickness - Mating	15.0µin (0.38µm)	15.0µin (0.38µm)	10.0µin (0.25µm)	—	29.5µin (0.75µm)	100.0µin (2.54µm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating	3A per Contact	3A per Contact	3A	3A	3A	3A
Operating Temperature	-65°C ~ 125°C	-65°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-65°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Voltage Rating	—	—	150VDC	150VDC	150VDC	—

Engineering Selection Recommendations

Primary Recommendation: 68001-236HLF

The 68001-236HLF is the preferred substitute for the obsolete 68001-236. Both parts are from Amphenol ICC's BERGSTIK® II series and maintain identical electrical and mechanical specifications. The HLF variant offers active product status, improved RoHS compliance, and significantly higher inventory availability (6131 units vs. 1125 units). This part requires no design modifications and provides direct functional equivalence.

Secondary Recommendation: Preci-Dip 350 Series (350-10-136-00-006101, 350-80-136-00-006101, 350-V3-136-00-006101)

The Preci-Dip 350 series parts meet all core electrical requirements and maintain the 36-position, 2.54mm pitch configuration. These alternatives are suitable when:

RoHS3 compliance is required
Extended operating temperature range is not critical (minimum -55°C vs. -65°C)
Contact geometry variation (circular pins) is acceptable for the application
Voltage rating specification (150VDC) is beneficial

The 350-V3-136-00-006101 variant offers the highest contact finish thickness (29.5µin) among Preci-Dip options, providing enhanced durability for high-cycle mating applications.

Tertiary Recommendation: TE Connectivity 8-146274-6

The 8-146274-6 from TE Connectivity's AMPMODU Mod II series maintains the 36-position, 2.54mm pitch specification with equivalent current rating. This part is suitable when:

Active product status and RoHS compliance are required
The lower operating temperature maximum (105°C vs. 125°C) is acceptable
Breakaway connector capability is beneficial for the application
Higher contact finish thickness (100.0µin) is advantageous

Frequently Asked Questions (FAQ)

Q: Can the 68001-236HLF be used as a direct replacement for the 68001-236?

A: Yes. The 68001-236HLF is the active production equivalent from Amphenol ICC. Both parts share identical specifications for number of positions (36), pitch (2.54mm), contact type (male pin), current rating (3A per contact), operating temperature range (-65°C to 125°C), and flammability rating (UL94 V-0). No design modifications are required.

Q: What are the key differences between the Amphenol ICC and Preci-Dip alternatives?

A: The primary differences are contact geometry (square vs. circular), contact material (phosphor bronze vs. brass), and operating temperature minimum (-65°C vs. -55°C). All parts maintain the critical 36-position, 2.54mm pitch configuration and 3A current rating. Preci-Dip parts offer RoHS3 compliance and specified voltage rating (150VDC), which the original part does not provide.

Q: Are there any compatibility concerns when switching from the 68001-236 to a Preci-Dip 350 series part?

A: The circular contact geometry of Preci-Dip parts differs from the square contacts of the original Amphenol ICC connector. This difference may affect mating force characteristics and contact retention in the mating receptacle. Verify that the receiving connector socket is compatible with circular pin geometry before implementation.

Q: Which substitute part offers the best long-term availability?

A: The 68001-236HLF provides the highest inventory level (6131 units) and active product status, ensuring long-term availability. Among Preci-Dip alternatives, the 350-80-136-00-013101 offers the highest inventory (1057 units) with active status.

Q: Does the operating temperature range difference affect substitution suitability?

A: The Preci-Dip 350 series parts operate from -55°C to 125°C, compared to the original -65°C to 125°C range. If the application requires operation below -55°C, the Preci-Dip alternatives are not suitable. The 68001-236HLF and TE Connectivity 8-146274-6 maintain the full lower temperature specification.

Q: What is the significance of contact finish thickness differences?

A: Contact finish thickness affects durability and wear resistance during mating cycles. The original 68001-236 specifies 15.0µin (0.38µm) gold plating. Preci-Dip parts range from 10.0µin to 29.5µin depending on variant, while the TE Connectivity part provides 100.0µin. Higher thickness generally provides extended contact life in high-cycle applications.

Q: Are all substitute parts RoHS compliant?

A: The original 68001-236 is RoHS non-compliant. The 68001-236HLF is RoHS Compliant, Preci-Dip 350 series parts are ROHS3 Compliant, and the TE Connectivity 8-146274-6 is RoHS Compliant. Select the appropriate variant based on your regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message