68000-228HLF Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The 68000-228HLF is an active Amphenol ICC BERGSTIK® II rectangular connector header designed for through-hole board-to-board applications. This 28-position, single-row header operates at 0.100" (2.54mm) pitch and supports 3A per contact with solder termination. The connector features gold-plated mating contacts and phosphor bronze construction, rated for -65°C to 125°C operation with UL94 V-0 flammability compliance. Substitute parts are identified to address inventory availability, packaging preferences, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

68000-228HLF

Amphenol ICC (FCI)In Stock: 117368000-228HLF Datasheet

Current PartRFQ

PEC28SAAN

Sullins Connector SolutionsIn Stock: 1930PEC28SAAN Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 68000-228HLF is determined by strict alignment of the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins, 28 positions, single row
• Pitch Specification: 0.100" (2.54mm) mating pitch
• Mounting & Termination: Through-hole solder termination
• Electrical Performance: 3A per contact current rating
• Environmental Compliance: Operating temperature range -65°C to 125°C, UL94 V-0 flammability rating
• Contact Material & Geometry: Phosphor bronze construction with square contact shape
• Insulation Properties: Black insulation, 0.100" (2.54mm) insulation height

The substitute part PEC28SAAN from Sullins Connector Solutions meets all critical substitution criteria. Variations in contact finish (tin vs. gold), contact finish thickness, post length, and packaging format (bulk vs. bag) do not affect functional interchangeability in standard board-to-board applications.

Parameter Comparison

Engineering Selection Recommendations

Both the 68000-228HLF and PEC28SAAN are active products with current inventory availability. Selection between these parts is based on application-specific requirements and compliance certifications:

68000-228HLF (Amphenol ICC BERGSTIK® II): Select this part for applications requiring gold-plated mating contacts with thin gold finish (15.0µin). The BERGSTIK® II series designation indicates established design heritage. RoHS Compliant status applies. REACH Affected designation requires compliance verification for specific end-use applications.

PEC28SAAN (Sullins Connector Solutions): Select this part for applications where tin-plated contacts are acceptable and bulk packaging is preferred. The breakaway header feature provides additional flexibility for custom pin configurations. ROHS3 Compliant status and REACH Unaffected designation may simplify compliance documentation for certain supply chains.

Both parts meet identical electrical performance specifications (3A per contact, -65°C to 125°C operation, UL94 V-0 flammability). The choice between gold and tin contact finishes depends on application environment, mating cycle requirements, and corrosion resistance needs.

Frequently Asked Questions (FAQ)

Q: Can PEC28SAAN directly replace 68000-228HLF in existing designs?

A: Yes, for standard board-to-board applications. Both connectors share identical pitch (0.100"), position count (28), row configuration (1), contact geometry (square male pins), and electrical ratings (3A per contact). The primary difference is contact finish: gold (68000-228HLF) versus tin (PEC28SAAN). Verify that your application does not require the specific corrosion resistance or contact resistance characteristics of gold plating.

Q: What is the significance of the "Breakaway" feature on the PEC28SAAN?

A: The breakaway feature allows individual pins or groups of pins to be separated from the header strip after manufacturing. This provides design flexibility for custom pin configurations without requiring a separate part number. The 68000-228HLF does not offer this feature.

Q: Are there differences in post length that affect PCB design?

A: Yes. The 68000-228HLF has a post length of 0.095" (2.41mm), while the PEC28SAAN has 0.120" (3.05mm). Overall contact length differs accordingly (0.425" vs. 0.450"). Verify that your PCB thickness and solder joint design accommodate the longer post length of the PEC28SAAN if substituting into existing layouts.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: Both designations indicate compliance with Restriction of Hazardous Substances regulations. ROHS3 represents the current version of the directive. Both parts meet the same hazardous substance restrictions for this product category.

Q: Does packaging format (Bag vs. Bulk) affect part performance?

A: No. Packaging format affects only handling, storage, and inventory management. Electrical and mechanical performance is identical regardless of packaging. Select based on your procurement and assembly process requirements.

Q: Can these connectors be used for cable-to-board applications?

A: The 68000-228HLF is specified for board-to-board style. The PEC28SAAN is specified for board-to-board or cable applications, providing additional flexibility. Verify connector mating requirements for your specific application.