Amphenol ICC 68000-119HLF Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68000-119HLF is an active rectangular connector header designed for through-hole board-to-board applications. This 19-position, single-row connector operates at 0.100" (2.54mm) pitch and supports 3A per contact with solder termination. The connector is manufactured from phosphor bronze with gold or gold GXT™ contact finish and operates across -65°C to 125°C. As an active product with full inventory availability, substitutes are identified for design flexibility, supply chain alternatives, and application-specific requirements where equivalent electrical and mechanical parameters are maintained.

Substiute Parts

68000-119HLF

Amphenol ICC (FCI)In Stock: 78968000-119HLF Datasheet

Current PartRFQ

PEC19SAAN

Sullins Connector SolutionsIn Stock: 837PEC19SAAN Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Sullins Connector Solutions PEC19SAAN qualifies as a direct substitute for the Amphenol ICC 68000-119HLF based on the following critical parameters:

• Connector Type & Configuration: Both are single-row, 19-position headers with male pin contacts
• Pitch Specification: Identical 0.100" (2.54mm) mating pitch ensures mechanical and electrical compatibility
• Mounting & Termination: Both utilize through-hole mounting with solder termination
• Electrical Performance: Both support 3A per contact current rating
• Operating Temperature Range: Identical -65°C to 125°C operating envelope
• Contact Material: Both employ phosphor bronze construction
• Flammability Compliance: Both meet UL94 V-0 material flammability rating
• Regulatory Compliance: Both are RoHS compliant and carry EAR99 ECCN classification

Substitution is valid where application requirements do not mandate specific contact finish specifications or insulation material properties beyond the parameters listed above.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 68000-119HLF and Sullins Connector Solutions PEC19SAAN are active products with current inventory availability. Selection between these parts should be based on the following factors:

Amphenol ICC 68000-119HLF is appropriate when:

• Gold or gold GXT™ contact finish is specified for enhanced corrosion resistance or specific application requirements
• Moisture sensitivity level tracking is required (MSL 1 - Unlimited)
• BERGSTIK® II series designation is mandated by design specification

Sullins Connector Solutions PEC19SAAN is appropriate when:

• Tin contact finish meets application requirements
• Breakaway header functionality is beneficial for the application
• ROHS3 compliance status is preferred
• Post length of 0.120" (3.05mm) accommodates PCB thickness or assembly requirements

Both parts maintain identical electrical performance (3A per contact), operating temperature range (-65°C to 125°C), and material flammability compliance (UL94 V-0). The primary differentiation lies in contact finish specification and post length geometry.

Frequently Asked Questions (FAQ)

Q: Can PEC19SAAN replace 68000-119HLF in existing designs without PCB modification?

A: Mechanical compatibility is maintained for mating pitch (0.100" / 2.54mm), contact count (19 positions), and insulation height (0.100" / 2.54mm). However, the post length differs: 68000-119HLF has 0.095" (2.41mm) posts while PEC19SAAN has 0.120" (3.05mm) posts. PCB hole depth and solder fillet clearance must be evaluated for your specific assembly process.

Q: What is the difference between the contact finishes?

A: The 68000-119HLF uses gold or gold GXT™ finish (30.0µin / 0.76µm thickness), while PEC19SAAN uses tin finish (100.0µin / 2.54µm thickness). Gold provides superior corrosion resistance in harsh environments; tin is suitable for standard industrial applications and offers cost efficiency.

Q: Are both parts RoHS compliant?

A: Yes. The 68000-119HLF is RoHS Compliant, and the PEC19SAAN is ROHS3 Compliant. Both meet current RoHS requirements.

Q: What is the difference in insulation material?

A: The 68000-119HLF does not specify insulation material in the provided data. The PEC19SAAN uses Polybutylene Terephthalate (PBT), which provides good mechanical strength and thermal stability.

Q: Can these connectors be used for board-to-cable applications?

A: The 68000-119HLF is specified for board-to-board style. The PEC19SAAN is specified as both board-to-board or cable compatible, offering greater application flexibility.

Q: What is the current rating for each contact?

A: Both connectors support 3A per contact, providing identical electrical capacity for signal and power distribution applications.

Q: Are there any moisture sensitivity considerations?

A: The 68000-119HLF has MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. The PEC19SAAN lists MSL as Not Applicable, indicating standard handling procedures are sufficient.