Amphenol ICC 67997-128HLF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 67997-128HLF is an active rectangular connector header designed for through-hole board-to-board applications. This BERGSTIK® II series connector features 28 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The part is manufactured with phosphor bronze contacts finished in gold and is rated for 3A continuous current operation across an extended temperature range of -65°C to 130°C. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative connector solutions that maintain electrical and mechanical compatibility within the specified parameter tolerances.

Key Parameters

Parameter	Specification
Connector Type	Header
Contact Type	Male Pin
Number of Positions	28
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Contact Length - Mating	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)
Overall Contact Length	0.450" (11.43mm)
Contact Material	Phosphor Bronze
Current Rating	3A
Operating Temperature	-65°C to 130°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitution eligibility for the 67997-128HLF is determined by strict equivalence across the following critical parameters: 28-position count, 2-row configuration, 0.100" (2.54mm) mating pitch, 0.100" (2.54mm) row spacing, through-hole mounting, solder termination, male pin contact type, and phosphor bronze contact material. All identified substitute parts maintain these core electrical and mechanical specifications.

The three substitute parts—PBC14DAAN, PEC14DAAN, and PEC14DACN—are manufactured by Sullins Connector Solutions and share identical position count, row configuration, pitch spacing, mounting method, and contact material with the primary part. Variations exist in contact finish specifications and post length, which are documented in the parameter comparison table below.

Parameter Comparison

Parameter	67997-128HLF (Amphenol ICC)	PBC14DAAN (Sullins)	PEC14DAAN (Sullins)	PEC14DACN (Sullins)
Connector Type	Header	Header, Breakaway	Header, Breakaway	Header, Breakaway
Number of Positions	28	28	28	28
Number of Rows	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Length - Mating	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.320" (8.13mm)
Overall Contact Length	0.450" (11.43mm)	0.450" (11.43mm)	0.450" (11.43mm)	0.650" (16.51mm)
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Contact Finish - Mating	Gold or Gold, GXT™	Gold	Tin	Tin
Contact Finish - Post	-	Tin	Tin	Tin
Current Rating	3A	3A	3A	3A
Operating Temperature	-65°C to 130°C	-65°C to 125°C	-65°C to 125°C	-65°C to 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected
Moisture Sensitivity Level	MSL 1 (Unlimited)	Not Applicable	Not Applicable	Not Applicable

Engineering Selection Recommendations

All substitute parts maintain active product status and comply with RoHS and REACH regulatory requirements. The 67997-128HLF operates across -65°C to 130°C, while Sullins alternatives operate to -65°C to 125°C, representing a 5°C reduction in maximum operating temperature. Selection between substitute options depends on specific application requirements:

PBC14DAAN provides gold mating contact finish matching the primary part's finish specification, with standard 0.120" (3.05mm) post length and 0.450" (11.43mm) overall contact length.

PEC14DAAN features tin mating contact finish with identical post length and overall contact length specifications to PBC14DAAN.

PEC14DACN provides extended post length of 0.320" (8.13mm) and overall contact length of 0.650" (16.51mm), suitable for applications requiring deeper PCB penetration or thicker substrate accommodation.

All parts are manufactured with phosphor bronze contacts, UL94 V-0 rated insulation material, and are rated for 3A continuous current operation.

Frequently Asked Questions (FAQ)

Q: Can PBC14DAAN, PEC14DAAN, or PEC14DACN be used as direct replacements for the 67997-128HLF?

A: Yes, all three substitute parts maintain the critical electrical and mechanical parameters: 28 positions, 2-row configuration, 0.100" (2.54mm) pitch spacing, through-hole solder termination, and 3A current rating. Physical footprint compatibility is ensured by identical mating contact length and row spacing specifications.

Q: What is the difference between the three substitute options?

A: PBC14DAAN features gold mating contact finish. PEC14DAAN features tin mating contact finish. PEC14DACN features tin mating contact finish with extended post length (0.320" versus 0.120") and overall contact length (0.650" versus 0.450"), accommodating thicker PCB assemblies or applications requiring deeper solder joint penetration.

Q: Does the operating temperature difference affect substitution eligibility?

A: The 67997-128HLF operates to 130°C maximum, while Sullins alternatives operate to 125°C maximum. Applications operating above 125°C require the primary part. Applications operating at or below 125°C are compatible with all substitute options.

Q: Are contact finish differences significant for substitution?

A: Contact finish affects corrosion resistance and mating force characteristics. Gold finish (PBC14DAAN) provides superior corrosion resistance compared to tin finish (PEC14DAAN, PEC14DACN). Selection depends on environmental exposure and connector cycling requirements specified in the application design.

Q: What packaging is available for these parts?

A: All parts are supplied in bulk packaging. Current inventory levels are: 67997-128HLF (1116 pcs), PBC14DAAN (1311 pcs), PEC14DAAN (1594 pcs), and PEC14DACN (1911 pcs).

Q: Are all parts RoHS and REACH compliant?

A: Yes. The 67997-128HLF is RoHS Compliant and REACH Unaffected. All Sullins substitute parts are ROHS3 Compliant and REACH Unaffected, meeting current regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message