67996-108HTLF Equivalent & Substitute Parts

Part Overview

The 67996-108HTLF is a rectangular connector header manufactured by Amphenol ICC (FCI) in the BERGSTIK® II series. This through-hole connector features 8 positions arranged in 2 rows with 0.100" (2.54mm) pitch, designed for board-to-board applications. The part is currently active and available in stock with 1065 units. Substitute parts are necessary when the original part becomes unavailable, when alternative compliance certifications are required, or when design flexibility permits equivalent electrical and mechanical performance.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	8
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Current Rating	3A per Contact
Operating Temperature	-65°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution of the 67996-108HTLF is determined by strict equivalence in the following electrical and mechanical parameters:

Pitch - Mating: 0.100" (2.54mm)
Number of Positions: 8
Number of Rows: 2
Row Spacing - Mating: 0.100" (2.54mm)
Contact Type: Male Pin
Mounting Type: Through Hole
Termination: Solder
Fastening Type: Push-Pull
Current Rating: 3A per Contact
Material Flammability Rating: UL94 V-0

Substitute parts are grouped into three categories based on product status and compliance:

Active Parts (Recommended for New Designs): Parts with Active product status and current RoHS compliance certifications.

Manufacturer Recommended Parts: Parts designated as manufacturer recommendations, including both active and discontinued variants.

Obsolete/Discontinued Parts: Parts with Obsolete or Discontinued at DiGi Electronics status, suitable only for legacy system maintenance or replacement scenarios.

Parameter Comparison

Parameter	67996-108HTLF	5-146256-4	5-146257-4	5-146261-4	0010897081	0010897082	4-103328-0-04	4-103777-0-04	4-103783-0-04	450-10-208-00-001101	5-146254-4
Manufacturer	Amphenol ICC (FCI)	TE Connectivity AMP	TE Connectivity AMP	TE Connectivity AMP	Molex	Molex	TE Connectivity AMP	TE Connectivity AMP	TE Connectivity AMP	Preci-Dip	TE Connectivity AMP
Series	BERGSTIK® II	AMPMODU Mod II	AMPMODU Mod II	AMPMODU Mod II	C-Grid 70280	C-Grid 70280	AMPMODU Mod II	AMPMODU Mod II	AMPMODU Mod II	450	AMPMODU Mod II
Product Status	Active	Active	Active	Active	Active	Active	Obsolete	Obsolete	Discontinued at DiGi Electronics	Active	Active
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	8	8	8	8	8	8	8	8	8	8	8
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Current Rating (Amps)	3A per Contact	3A	3A	3A	—	—	3A	3A	3A	3A	3A
Operating Temperature	-65°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	—	—	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-55°C ~ 125°C	-65°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS non-compliant	RoHS non-compliant	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Inventory Status	1065 Pcs	3010 Pcs	1081 Pcs	983 Pcs	2770 Pcs	3303 Pcs	2560 Pcs	1167 Pcs	1479 Pcs	1725 Pcs	3530 Pcs

Engineering Selection Recommendations

For New Designs (Active Status Required):

Select from parts with Active product status: 5-146256-4, 5-146257-4, 5-146261-4, 0010897081, 0010897082, 450-10-208-00-001101, or 5-146254-4. All maintain electrical and mechanical equivalence to the 67996-108HTLF.

RoHS Compliance Consideration:

The 67996-108HTLF carries RoHS Compliant status. Substitute parts 5-146256-4, 0010897081, 0010897082, 450-10-208-00-001101, and 5-146254-4 carry ROHS3 Compliant certification, which represents current RoHS 3 directive compliance. Parts 5-146257-4 and 5-146261-4 carry RoHS Compliant status. Parts 4-103328-0-04, 4-103777-0-04, and 4-103783-0-04 are RoHS non-compliant and are not suitable for new designs subject to RoHS requirements.

Operating Temperature Range:

The 67996-108HTLF operates from -65°C to 125°C. Most substitute parts operate from -65°C to 105°C, representing a 20°C reduction in maximum operating temperature. Part 450-10-208-00-001101 operates from -55°C to 125°C, matching the upper temperature limit but with a 10°C reduction at the lower end. Applications requiring the full -65°C to 125°C range should retain the 67996-108HTLF or evaluate temperature requirements against substitute specifications.

Obsolete Parts (Legacy Systems Only):

Parts 4-103328-0-04, 4-103777-0-04, and 4-103783-0-04 are designated Obsolete or Discontinued at DiGi Electronics. These are suitable only for replacement in existing systems where the original part is no longer available and design modification is not feasible.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the 67996-108HTLF?

A: Substitution requires equivalence in pitch (0.100" / 2.54mm), position count (8), row configuration (2 rows), row spacing (0.100" / 2.54mm), contact type (Male Pin), mounting method (Through Hole), termination (Solder), fastening type (Push-Pull), current rating (3A per contact), and flammability rating (UL94 V-0). All listed substitute parts meet these criteria.

Q: Why do some substitute parts have lower maximum operating temperatures?

A: Operating temperature range is determined by the insulation material and contact finish specifications. The 67996-108HTLF uses phosphor bronze contacts with specific material properties supporting -65°C to 125°C operation. Many substitute parts use copper alloy contacts with liquid crystal polymer insulation, which limits maximum temperature to 105°C. Applications requiring full temperature range should confirm compatibility with the specific substitute part's thermal specifications.

Q: Are RoHS non-compliant parts acceptable substitutes?

A: RoHS non-compliant parts (4-103328-0-04, 4-103777-0-04, 4-103783-0-04) are electrically and mechanically equivalent but do not meet current RoHS 3 directive requirements. These parts are suitable only for legacy system maintenance or replacement in applications not subject to RoHS compliance mandates. New designs should use RoHS-compliant alternatives.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant designations?

A: RoHS Compliant indicates compliance with the original RoHS directive. ROHS3 Compliant indicates compliance with RoHS 3 (Directive 2015/863/EU), which includes additional restricted substances. ROHS3 Compliant parts represent current regulatory compliance and are preferred for new designs.

Q: Can I use parts with different contact finishes interchangeably?

A: Contact finish (Gold, Tin, or Tin-Lead) affects electrical properties and environmental resistance. The 67996-108HTLF specifies Gold or Gold, GXT™ mating finish. Substitute parts with Tin or Tin-Lead finishes are electrically equivalent for standard applications but may differ in corrosion resistance and long-term reliability in specific environments. Confirm finish compatibility with application requirements.

Q: What packaging differences exist among substitute parts?

A: The 67996-108HTLF is supplied in Tube packaging. Most substitute parts are supplied in Bulk packaging. Packaging affects handling, storage, and ordering quantities but does not affect electrical or mechanical performance. Confirm packaging requirements with procurement specifications.

Q: Are there inventory considerations for part selection?

A: Inventory levels vary significantly among substitute parts. Part 5-146254-4 has the highest inventory (3530 Pcs), while 5-146261-4 has the lowest among active parts (983 Pcs). For applications requiring immediate availability or large quantities, confirm current inventory status with the supplier.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message