Amphenol ICC 67274-010 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 67274-010 is a rectangular connector header designed for through-hole mounting applications. This shrouded 4-wall header features 20 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, suitable for board-to-board or cable interconnections. The part is classified as obsolete, making identification of equivalent and substitute components essential for ongoing design support and procurement planning.

Substiute Parts

67274-010

Amphenol ICC (FCI)In Stock: 113767274-010 Datasheet

Current PartRFQ

67273-010LF

Amphenol ICC (FCI)In Stock: 84767273-010LF Datasheet

DirectRFQ

1-102692-6

TE Connectivity AMP ConnectorsIn Stock: 7571-102692-6 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 67274-010 is determined by strict alignment of the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions and rows (20 positions, 2 rows)
• Mating pitch and row spacing (0.100" / 2.54mm)
• Shrouding configuration (Shrouded - 4 Wall)
• Mounting method (Through Hole)
• Termination type (Solder)
• Fastening mechanism (Push-Pull)
• Contact shape (Square)
• Flammability rating (UL94 V-0)

Two substitute parts meet these criteria: the Amphenol ICC 67273-010LF (direct manufacturer equivalent) and the TE Connectivity 1-102692-6 (manufacturer-recommended alternative).

Parameter Comparison

Engineering Selection Recommendations

The 67273-010LF serves as the direct manufacturer substitute for the obsolete 67274-010. Both parts are manufactured by Amphenol ICC and share identical mechanical and electrical specifications. The primary distinction is product status: the 67273-010LF is active and available, while the 67274-010 is obsolete. The 67273-010LF achieves RoHS compliance, whereas the original part does not. Contact finish thickness on the 67273-010LF is doubled (30.0µin versus 15.0µin), providing enhanced durability.

The TE Connectivity 1-102692-6 represents an alternative from a different manufacturer within the AMPMODU Mod II series. This part maintains all critical mechanical parameters and fastening characteristics. Differences include insulation material composition (thermoplastic, glass-filled versus resin), insulation color (black versus natural), and contact material (copper alloy versus phosphor bronze). The 1-102692-6 provides specified operating temperature range (-65°C to 105°C) and current/voltage ratings (2A at 250VAC), which are not documented for the original part.

For applications requiring RoHS compliance, the 67273-010LF is the preferred selection. For applications with specific thermal or electrical requirements, the 1-102692-6 offers documented performance parameters.

Frequently Asked Questions (FAQ)

Q: Can the 67273-010LF be used as a direct replacement for the 67274-010?

A: Yes. The 67273-010LF is the direct manufacturer equivalent. Both parts share identical connector type, position count, pitch spacing, shrouding configuration, and mounting method. The primary difference is product status and RoHS compliance.

Q: What is the significance of the contact finish thickness difference between 67274-010 and 67273-010LF?

A: The 67273-010LF features 30.0µin (0.76µm) mating contact finish thickness compared to 15.0µin (0.38µm) on the 67274-010. Increased thickness provides enhanced wear resistance and contact durability over extended mating cycles.

Q: Is the 1-102692-6 mechanically compatible with the 67274-010?

A: Yes. The 1-102692-6 maintains all critical mechanical parameters: 20 positions in 2 rows, 0.100" pitch spacing, shrouded 4-wall configuration, through-hole mounting, and push-pull fastening. Physical compatibility is established.

Q: What are the packaging differences among these three parts?

A: The 67274-010 packaging is not specified. The 67273-010LF is supplied in bulk packaging. The 1-102692-6 is supplied in tube packaging. Packaging selection may affect procurement quantities and handling procedures.

Q: Does the insulation material difference between parts affect electrical performance?

A: Both insulation materials (resin and thermoplastic, glass-filled) meet UL94 V-0 flammability requirements. Material selection does not alter the fundamental electrical characteristics for standard applications. Specific environmental or thermal requirements may influence material suitability.

Q: Which substitute part should be selected for new designs?

A: For new designs requiring RoHS compliance, the 67273-010LF is the appropriate selection. For applications requiring documented operating temperature and electrical ratings, the 1-102692-6 provides specified performance parameters. Both parts are active and available from manufacturers.