Amphenol ICC 67273-010 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 67273-010 is a rectangular connector header designed for through-hole mounting applications. This shrouded 20-position connector with 2.54mm pitch serves board-to-board and cable interconnection requirements. The part is currently active in production with 1101 units in stock. Substitute parts are identified to address inventory availability, lead time considerations, or specific application requirements where equivalent electrical and mechanical parameters are maintained.

Substiute Parts

67273-010

Amphenol ICC (FCI)In Stock: 115467273-010 Datasheet

Current PartRFQ

6-102567-1

TE Connectivity AMP ConnectorsIn Stock: 19996-102567-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Amphenol ICC 67273-010 is determined by the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins
• Position Count & Row Configuration: 20 positions in 2 rows
• Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
• Shrouding & Mounting: Shrouded 4-wall design with through-hole mounting
• Termination & Fastening: Solder termination with push-pull fastening
• Contact Geometry: Square contact shape
• Flammability Compliance: UL94 V-0 rating

The TE Connectivity AMP Connectors part number 6-102567-1 qualifies as a manufacturer-recommended substitute. This part maintains all critical electrical and mechanical parameters required for direct functional equivalence, including identical pitch, position count, row configuration, shrouding design, and mounting method. Both parts support board-to-board interconnection with identical contact geometry and fastening mechanisms.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 67273-010 and TE Connectivity 6-102567-1 are active production parts with identical core electrical and mechanical specifications. Selection between these parts should be based on the following factors:

Amphenol ICC 67273-010 is appropriate when the original design specification or existing inventory requirements mandate this manufacturer's part number.

TE Connectivity 6-102567-1 is appropriate when ROHS3 compliance is required for the end application, as this part meets current RoHS3 standards while the Amphenol part does not. The TE Connectivity part also provides documented operating temperature range (-65°C ~ 105°C), current rating (3A), and voltage rating (250VAC) specifications. Higher inventory availability (1892 units) may support shorter lead times.

Both parts maintain identical pitch, position count, row configuration, shrouding design, mounting method, and flammability compliance, ensuring direct functional interchangeability in applications where the specified electrical and mechanical parameters are met.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 6-102567-1 be used as a direct replacement for the Amphenol ICC 67273-010?

A: Yes. Both parts share identical mating pitch (0.100" / 2.54mm), position count (20), row configuration (2 rows), shrouding design (4-wall), mounting method (through-hole), termination type (solder), and fastening mechanism (push-pull). The contact geometry, insulation height, and flammability rating are equivalent.

Q: What is the primary difference between these two parts?

A: The TE Connectivity part is ROHS3 compliant, while the Amphenol part is RoHS non-compliant. The TE Connectivity part also provides documented operating temperature range, current rating, and voltage rating specifications. Packaging differs (tube versus bulk).

Q: Are there any mechanical compatibility concerns when substituting between these parts?

A: No. Both parts maintain identical pitch spacing, row spacing, insulation height, and contact geometry. PCB footprints and mating connector requirements are identical.

Q: Does the difference in insulation material affect compatibility?

A: Both parts meet UL94 V-0 flammability requirements. The Amphenol part uses resin insulation while the TE Connectivity part uses thermoplastic glass-filled insulation. Both materials satisfy the specified flammability and moisture sensitivity requirements.

Q: Which part should be selected for new designs?

A: Selection depends on compliance requirements. For applications requiring RoHS3 compliance, the TE Connectivity 6-102567-1 is the appropriate choice. For applications without RoHS compliance requirements, either part is functionally equivalent.