Equivalent & Substitute Parts for 67095-064LF

Part Overview

The Amphenol ICC 67095-064LF is a rectangular connector header featuring right-angle mounting, 8 positions at 2.5mm pitch, and through-hole solder termination. This component is classified as obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications. The part is designed for board-to-cable/wire connections with shrouded 4-wall construction and gold-plated mating contacts.

Substiute Parts

67095-064LF

Amphenol ICC (FCI)In Stock: 105467095-064LF Datasheet

Current PartRFQ

0022121082

MolexIn Stock: 7800022121082 Datasheet

MFR RecommendedRFQ

S8B-XH-A

JST Sales America Inc.In Stock: 9195S8B-XH-A Datasheet

MFR RecommendedRFQ

S8B-XH-A-1

JST Sales America Inc.In Stock: 3364S8B-XH-A-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution validity for the 67095-064LF is determined by the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Pitch - mating (0.098" / 2.50mm)
• Number of positions (8)
• Number of rows (1)
• Mounting type (Through Hole, Right Angle)
• Termination method (Solder)
• Shrouding configuration (Shrouded)
• Material flammability rating (UL94 V-0)

The three substitute parts listed—Molex 0022121082, JST S8B-XH-A, and JST S8B-XH-A-1—meet these core electrical and mechanical requirements. Variations in contact finish, insulation material, fastening type, and shrouding wall count represent acceptable design alternatives within the rectangular connector category.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are classified as active products, providing long-term availability and supply chain stability compared to the obsolete 67095-064LF. All candidates meet UL94 V-0 flammability requirements and maintain MSL 1 (Unlimited) moisture sensitivity ratings.

The Molex 0022121082 offers gold-plated mating contacts matching the original part's contact finish specification, though it features single-wall shrouding versus the original's four-wall design. This part is suitable for applications where contact finish compatibility is prioritized.

The JST S8B-XH-A and S8B-XH-A-1 provide four-wall shrouding matching the original configuration and support both press-fit and solder termination methods. These parts feature tin-plated contacts and higher current ratings (3A versus 2A), with specified voltage ratings of 250V. The two JST variants are functionally equivalent; S8B-XH-A-1 represents an alternative packaging or configuration designation within the same series.

All substitute parts maintain the critical 2.5mm pitch and 8-position, single-row configuration required for mechanical and electrical compatibility with existing mating connectors and PCB layouts.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0022121082 be used as a direct replacement for the 67095-064LF?

A: The Molex 0022121082 meets the core electrical and mechanical requirements: 8 positions, 2.5mm pitch, through-hole right-angle mounting, and solder termination. However, it features single-wall shrouding compared to the original's four-wall design and uses friction lock fastening instead of push-pull. These differences may affect mechanical fit and mating force characteristics in applications with specific shrouding or fastening requirements.

Q: What is the difference between the JST S8B-XH-A and S8B-XH-A-1?

A: Both parts are functionally equivalent, sharing identical electrical and mechanical specifications: 8 positions, 2.5mm pitch, four-wall shrouding, detent lock fastening, and support for both press-fit and solder termination. The designation difference (S8B-XH-A versus S8B-XH-A-1) reflects packaging or configuration variants within the JST XH series. Selection between them depends on specific packaging requirements or supplier availability.

Q: Are there compatibility concerns with contact finish differences?

A: The original 67095-064LF features gold-plated mating contacts, while the JST substitutes use tin plating. Both finishes provide adequate electrical conductivity and corrosion resistance for standard applications. Gold plating offers superior performance in low-signal or high-reliability applications; tin plating is suitable for general-purpose power and signal distribution. Application requirements determine whether contact finish compatibility is critical.

Q: Do the substitute parts support the same current rating as the original?

A: The original 67095-064LF is rated for 2A DC. The Molex 0022121082 does not specify a current rating in available documentation. The JST S8B-XH-A and S8B-XH-A-1 are rated for 3A, exceeding the original specification. For applications requiring exactly 2A operation, verify that the selected substitute's current rating meets or exceeds the design requirement.

Q: Are all substitute parts RoHS compliant?

A: The Molex 0022121082 and JST S8B-XH-A/S8B-XH-A-1 are ROHS3 compliant. The original 67095-064LF does not specify RoHS status. All parts maintain EAR99 export classification and REACH Unaffected or equivalent regulatory status, suitable for standard commercial and industrial applications.