Amphenol ICC 67095-008LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 67095-008LF is a rectangular connector header, right-angle configuration, with 8 positions at 0.098" (2.50mm) pitch. This through-hole component features shrouded 4-wall design with solder termination and push-pull fastening. The part is classified as obsolete, making equivalent substitutes necessary for ongoing design support and procurement.

Substiute Parts

67095-008LF

Amphenol ICC (FCI)In Stock: 115667095-008LF Datasheet

Current PartRFQ

0022051082

MolexIn Stock: 29400022051082 Datasheet

MFR RecommendedRFQ

S8B-XH-A

JST Sales America Inc.In Stock: 9195S8B-XH-A Datasheet

MFR RecommendedRFQ

S8B-XH-A-1

JST Sales America Inc.In Stock: 3364S8B-XH-A-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 67095-008LF is based on the following critical parameters that must align for functional equivalence:

• Connector type: Header
• Contact type: Male pin
• Pitch: 0.098" (2.50mm)
• Number of positions: 8
• Number of rows: 1
• Mounting: Through hole, right angle
• Termination: Solder-capable
• Contact material: Brass with tin finish
• Flammability rating: UL94 V-0

The three substitute parts listed below meet these core electrical and mechanical requirements. Variations in shrouding design (4-wall vs. 1-wall), fastening mechanism (push-pull vs. friction lock vs. detent lock), and insulation material (PBT vs. polyamide) are acceptable within the scope of rectangular connector substitution, provided the mating interface and electrical characteristics remain compatible.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are active products with current manufacturing support, addressing the obsolescence status of the 67095-008LF. Selection should be based on the following criteria:

Molex 0022051082: This part maintains full solder termination compatibility and UL94 V-0 flammability rating. The single-wall shrouding differs from the original 4-wall design, which may affect mechanical robustness in applications requiring enhanced strain relief or EMI shielding. Friction lock fastening replaces the original push-pull mechanism. RoHS3 compliance is confirmed.

JST S8B-XH-A and S8B-XH-A-1: Both parts offer 4-wall shrouding matching the original design and provide higher current rating (3A vs. 2A) with specified voltage rating (250V). Press-fit and solder termination options provide assembly flexibility. Detent lock fastening differs from the original push-pull mechanism. Both are RoHS3 compliant. The S8B-XH-A-1 variant is functionally identical to S8B-XH-A with equivalent electrical and mechanical specifications.

For applications where the original push-pull fastening mechanism is critical to the design, mechanical interface validation is required before substitution. For applications where fastening mechanism flexibility exists, all three substitutes are electrically and mechanically compatible based on provided specifications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0022051082 replace the Amphenol ICC 67095-008LF directly?

A: The Molex 0022051082 meets the core electrical and mechanical requirements: 8-position, 2.50mm pitch, through-hole right-angle header with solder termination and brass tin-plated contacts. The primary difference is single-wall shrouding versus the original 4-wall design, and friction lock fastening versus push-pull. If the application does not depend on the specific shrouding or fastening mechanism, direct substitution is feasible.

Q: What is the difference between the JST S8B-XH-A and S8B-XH-A-1?

A: Based on provided specifications, both parts are functionally equivalent. Both are JST XH series, 8-position 2.50mm pitch headers with 4-wall shrouding, detent lock fastening, and identical electrical ratings (3A, 250V, -25°C ~ 85°C). No technical differentiation is specified in the provided data.

Q: Are the substitute parts compatible with the original mating connectors?

A: All substitute parts maintain the 0.098" (2.50mm) pitch and 8-position configuration. Mating compatibility depends on the connector design of the mating component. If the mating connector is pitch-specific and position-count specific, compatibility is established. Fastening mechanism differences (push-pull vs. friction lock vs. detent lock) may affect the mating interface engagement method and should be evaluated against the mating connector specification.

Q: Which substitute offers the best compliance profile?

A: All three substitutes are UL94 V-0 rated and MSL 1 (Unlimited). The Molex 0022051082 and both JST parts are RoHS3 compliant. The original 67095-008LF does not specify RoHS status. For applications requiring RoHS3 compliance, any of the three substitutes is suitable.

Q: Can I use the higher current rating of the JST parts (3A) in place of the original 2A rating?

A: The JST S8B-XH-A and S8B-XH-A-1 are rated for 3A, exceeding the original 2A specification. Higher current rating does not create incompatibility; the substitute can safely handle applications designed for 2A. However, if the application requires exactly 2A operation, the Molex 0022051082 (unspecified current rating) or original part specifications should be cross-referenced with actual circuit requirements.

Q: What is the impact of insulation material differences?

A: The original part uses PBT (polybutylene terephthalate) glass-filled insulation, while the Molex substitute uses polyamide (PA) nylon and the JST substitutes use polyamide (PA66) nylon 6/6. All materials are UL94 V-0 rated. Polyamide materials offer good chemical resistance and mechanical properties suitable for connector applications. Material selection should be evaluated against specific environmental exposure (temperature extremes, chemical exposure, humidity) if the application has specialized requirements.