Amphenol ICC 67094-010LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 67094-010LF is a rectangular connector header designed for through-hole mounting in board-to-cable/wire applications. This 10-position connector operates within the -25°C to 85°C temperature range and features a 2.5mm pitch with shrouded 4-wall design. The product is currently classified as obsolete, making identification of compatible substitute parts essential for ongoing system support and component procurement.

Substiute Parts

67094-010LF

Amphenol ICC (FCI)In Stock: 108667094-010LF Datasheet

Current PartRFQ

B10B-XH-A

JST Sales America Inc.In Stock: 4604B10B-XH-A Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 67094-010LF is determined by the following critical parameters:

• Connector Type & Contact Configuration: Must be a header with male pin contacts
• Pitch & Position Count: Must maintain 2.5mm (0.098") mating pitch with 10 positions in single row
• Mounting & Termination: Must support through-hole mounting with solder termination capability
• Shrouding Design: Must feature shrouded 4-wall construction for mechanical protection
• Electrical Performance: Must meet or exceed 2A current rating and UL94 V-0 flammability compliance
• Temperature Range: Must operate within -25°C to 85°C specification

The JST Sales America Inc. B10B-XH-A satisfies all substitution criteria within these parameters.

Parameter Comparison

Engineering Selection Recommendations

The B10B-XH-A from JST Sales America Inc. is a direct functional equivalent for the obsolete 67094-010LF. Both connectors maintain identical mating pitch, position count, shrouding configuration, and temperature operating range. The substitute part exceeds the original current rating (3A versus 2A) and maintains equivalent UL94 V-0 flammability compliance.

The B10B-XH-A carries active product status with ROHS3 compliance, ensuring long-term availability and regulatory alignment. The substitute supports both press-fit and solder termination methods, providing installation flexibility beyond the original solder-only specification. Mechanical dimensions remain consistent across critical parameters including insulation height and contact geometry.

Frequently Asked Questions (FAQ)

Q: Can the B10B-XH-A directly replace the 67094-010LF in existing designs?

A: Yes. Both connectors share identical mating pitch (2.5mm), position count (10), row configuration (1), shrouding design (4-wall), and mounting method (through-hole). Mechanical and electrical parameters align within the specified operating envelope.

Q: What are the key differences between these two connectors?

A: The primary differences are product status (obsolete versus active), insulation material composition (PBT glass-filled versus PA66 nylon), current rating (2A versus 3A), and termination options (solder only versus press-fit and solder). The B10B-XH-A provides higher current capacity and additional termination flexibility.

Q: Are there packaging considerations when switching to the B10B-XH-A?

A: The 67094-010LF is supplied in standard packaging, while the B10B-XH-A is available in bulk packaging. Procurement quantities and packaging specifications should be confirmed with the supplier based on application requirements.

Q: Does the substitute part maintain the same contact finish specifications?

A: Yes. Both connectors feature tin-plated brass contacts with identical mating and post contact finishes, ensuring equivalent electrical performance and corrosion resistance.

Q: Is the B10B-XH-A suitable for the same temperature range applications?

A: Yes. Both connectors operate across the -25°C to 85°C temperature range, making the substitute appropriate for equivalent thermal environments.