6-6610022-1 Equivalent & Substitute Parts

Part Overview

The 6-6610022-1 is a 4-port RJ45 modular connector jack manufactured by TRP Connector B.V., designed for 10/100 Base-T Ethernet applications with AutoMDIX support. This through-hole mounted connector features a 90° right-angle orientation and is actively produced. Substitute parts may be required due to inventory constraints, regional availability, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

6-6610022-1

TRP Connector B.V.In Stock: 7696-6610022-1 Datasheet

Current PartRFQ

6116125-1

TE Connectivity AMP ConnectorsIn Stock: 9936116125-1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 6116125-1 (TE Connectivity AMP Connectors) qualifies as a substitute based on the following critical parameters:

Matching Parameters:

• Connector Type: Jack modular connector (8p8c RJ45 Ethernet)
• Number of Ports: 4
• Number of Rows: 1
• Mounting Type: Through Hole
• Orientation: 90° Angle (Right)
• Termination: Solder
• Shielding: Shielded, EMI Finger
• Contact Material: Phosphor Bronze
• Contact Finish: Gold, 50.0µin (1.27µm)
• RoHS Status: ROHS3 Compliant
• MSL Rating: 1 (Unlimited)

Substitution is valid where these core electrical and mechanical parameters align, enabling direct replacement in 10/100 Base-T Ethernet applications.

Parameter Comparison

Engineering Selection Recommendations

Both the 6-6610022-1 and 6116125-1 are actively produced components with ROHS3 compliance and unlimited moisture sensitivity ratings, making them suitable for production environments. The 6116125-1 offers an extended operating temperature range (-40°C to 85°C) compared to the main part (0°C to 70°C), providing greater thermal flexibility for applications requiring wider temperature tolerance. Housing material differs (PET/Polyester versus Polyamide/Nylon), but both materials meet the mechanical and electrical requirements for modular connector applications. Selection should be based on inventory availability, thermal requirements, and specific application constraints.

Frequently Asked Questions (FAQ)

Q: Can the 6116125-1 directly replace the 6-6610022-1 in existing designs?

A: Yes, the 6116125-1 qualifies as a direct substitute. Both connectors share identical port configuration (4-port), mounting type (through-hole), orientation (90° right-angle), termination method (solder), shielding (EMI finger), contact materials, and finish specifications. Electrical and mechanical compatibility is maintained.

Q: What is the primary difference between these two connectors?

A: The main differences are housing material (PET/Polyester versus Polyamide/Nylon) and operating temperature range. The 6116125-1 supports -40°C to 85°C, while the 6-6610022-1 operates from 0°C to 70°C. For applications within the 0°C to 70°C range, both perform identically.

Q: Are both parts RoHS compliant?

A: Yes, both the 6-6610022-1 and 6116125-1 are ROHS3 compliant with unlimited moisture sensitivity ratings (MSL 1), suitable for standard manufacturing and storage conditions.

Q: Does the housing material difference affect electrical performance?

A: No. Both PET/Polyester and Polyamide/Nylon housing materials provide equivalent electrical isolation and shielding effectiveness for 10/100 Base-T Ethernet applications. Material selection does not impact signal integrity or EMI performance.

Q: What applications are these connectors suitable for?

A: Both connectors are designed for 10/100 Base-T Ethernet applications with AutoMDIX support (main part specification). The 4-port configuration and RJ45 jack design support standard network interface requirements.