Amphenol ICC 66564-910 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 66564-910 is a 10-position rectangular receptacle connector with IDC (Insulation Displacement Contact) termination and gold plating. This connector is designed for ribbon cable applications with dual-row configuration and 0.100" pitch spacing. The part is classified as obsolete, making identification of active equivalent components essential for ongoing design support and procurement.

Substiute Parts

66564-910

Amphenol ICC (FCI)In Stock: 118466564-910 Datasheet

Current PartRFQ

66900-010LF

Amphenol ICC (FCI)In Stock: 78866900-010LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 66564-910 is determined by the following critical parameters:

• Connector type: Receptacle
• Contact type: Female socket
• Position count: 10
• Pitch spacing: 0.100" (2.54mm)
• Row configuration: 2 rows at 0.100" spacing
• Cable termination method: IDC
• Wire interface: Ribbon cable
• Contact finish: Gold with GXT™ plating at 30.0µin thickness
• Mounting configuration: Free hanging, in-line

The substitute part 66900-010LF maintains all critical electrical and mechanical parameters while providing enhanced compliance status and active product availability.

Parameter Comparison

Engineering Selection Recommendations

The 66900-010LF is the manufacturer-recommended substitute for the obsolete 66564-910. Both connectors share identical electrical and mechanical specifications within the Quickie™ series, ensuring direct functional compatibility in ribbon cable IDC applications.

The 66900-010LF provides two significant advantages over the original part:

• Active product status with current manufacturing and inventory support
• RoHS compliance, meeting modern regulatory requirements for new designs and procurement

The 66900-010LF specifies 28-30 AWG wire gauge compatibility, aligning with standard ribbon cable specifications for 10-position dual-row configurations. This specification does not restrict compatibility but clarifies the intended wire gauge range for optimal IDC termination performance.

Both parts maintain identical contact finish specifications (Gold, GXT™ at 30.0µin thickness), MSL rating (1), and mechanical configuration, supporting direct substitution in existing applications.

Frequently Asked Questions (FAQ)

Q: Can the 66900-010LF directly replace the 66564-910 in existing designs?

A: Yes. Both connectors maintain identical pitch (0.100"), position count (10), row configuration (2 rows), contact type (female socket), and IDC termination method. Mechanical and electrical compatibility is assured.

Q: What is the significance of the wire gauge specification (28-30 AWG) on the 66900-010LF?

A: The 28-30 AWG specification indicates the recommended ribbon cable wire gauge for optimal IDC contact engagement. This is standard for 10-position dual-row ribbon cable connectors and does not restrict compatibility with other suitable gauges.

Q: Why is the 66564-910 listed as obsolete?

A: Obsolete status indicates the part is no longer in active production. The 66900-010LF serves as the current active equivalent within the Quickie™ series.

Q: Are there compliance differences between these parts?

A: Yes. The 66900-010LF is RoHS compliant and REACH affected, while the 66564-910 is RoHS non-compliant. For new designs and regulated applications, the 66900-010LF is the appropriate selection.

Q: Do both connectors support the same mounting configuration?

A: Yes. Both are configured as free hanging, in-line receptacles with identical mechanical mounting interfaces.

Q: Is inventory availability a consideration for part selection?

A: The 66900-010LF is active with current manufacturing support. The 66564-910, being obsolete, has limited remaining inventory. For ongoing production and new designs, the 66900-010LF is the recommended selection.