TE Connectivity Corcom Filters 6609026-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Corcom Filters 6609026-8 is a single-phase EMC/EMI line filter rated for 250VAC at 20A with 50/60Hz operation. This chassis-mounted filter is designed for general-purpose applications requiring electromagnetic compatibility and electromagnetic interference suppression. The part is currently active in production with 1,077 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when specific termination or compliance requirements necessitate component selection from alternative manufacturers.

Substiute Parts

6609026-8

TE Connectivity Corcom FiltersIn Stock: 11746609026-8 Datasheet

Current PartRFQ

F1200AA20

Curtis IndustriesIn Stock: 668F1200AA20 Datasheet

SimilarRFQ

F1200DD20

Curtis IndustriesIn Stock: 961F1200DD20 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity Corcom Filters 6609026-8 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Voltage rating: 250VAC
• Current rating: 20A
• Frequency: 50/60Hz
• Filter type: Single Phase
• Configuration: Single Stage
• Mounting type: Chassis Mount

Termination Consideration: The primary part features Threaded Post (8-32) termination. Substitute parts are grouped by termination style compatibility. Parts with identical termination allow direct replacement. Parts with alternative termination styles (Quick Connect) are listed as functional equivalents but require mechanical interface verification during installation.

Compliance Consideration: All identified substitutes maintain active product status and carry relevant regulatory approvals (CSA, UR, VDE, CE, TUV). RoHS3 compliance status differs between manufacturers but does not affect electrical substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

Direct Replacement (Identical Termination): The Curtis Industries F1200DD20 is the direct electrical and mechanical equivalent to the TE Connectivity Corcom Filters 6609026-8. Both parts feature Threaded Post (8-32) termination, identical voltage and current ratings, and matching frequency specifications. The F1200DD20 carries expanded regulatory approvals (CE, CSA, TUV, UR) and is ROHS3 compliant. This part supports seamless substitution in existing designs without mechanical interface modification.

Functional Equivalent (Alternative Termination): The Curtis Industries F1200AA20 provides electrical equivalence across all critical parameters (250VAC, 20A, 50/60Hz, single-phase, single-stage, chassis mount). However, this part features Quick Connect termination instead of Threaded Post (8-32). Selection of this part requires mechanical interface compatibility verification and potential connector adaptation during installation. The F1200AA20 carries the same expanded regulatory approvals and ROHS3 compliance as the F1200DD20.

Compliance Consideration: All three parts maintain active product status. The Curtis Industries substitutes provide broader regulatory coverage (CE, CSA, TUV, UR) compared to the TE Connectivity original (CSA, UR, VDE). Selection should account for specific application compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the F1200DD20 replace the 6609026-8 without any modifications? A: Yes. The F1200DD20 matches all critical electrical parameters (250VAC, 20A, 50/60Hz, single-phase, single-stage) and features identical Threaded Post (8-32) termination. No mechanical or electrical modifications are required for direct substitution.

Q: What is the difference between the F1200AA20 and F1200DD20? A: Both parts are electrically equivalent across voltage, current, frequency, and filter configuration. The primary difference is termination style: F1200AA20 uses Quick Connect termination, while F1200DD20 uses Threaded Post (8-32) termination. Selection depends on the mechanical interface requirements of the application.

Q: Are the Curtis Industries parts RoHS compliant? A: Yes. Both Curtis Industries substitutes (F1200AA20 and F1200DD20) are ROHS3 compliant. The original TE Connectivity part lists RoHS status as not applicable.

Q: What regulatory approvals do the substitute parts carry? A: The Curtis Industries F1200AA20 and F1200DD20 both carry CE, CSA, TUV, and UR approvals. The original TE Connectivity 6609026-8 carries CSA, UR, and VDE approvals. Application-specific compliance requirements should guide part selection.

Q: Can I use the F1200AA20 if my design requires Threaded Post termination? A: No. The F1200AA20 features Quick Connect termination and is not mechanically compatible with designs requiring Threaded Post (8-32) connections. The F1200DD20 is the appropriate substitute for this requirement.

Q: Are there any inductance differences between the parts? A: The TE Connectivity 6609026-8 specifies 440µH inductance. Inductance values for the Curtis Industries substitutes are not provided in available technical data. Inductance-critical applications should verify this parameter with the manufacturer before substitution.

Q: What is the operating temperature range for the substitute parts? A: Operating temperature specifications are not provided for the Curtis Industries F1200AA20 and F1200DD20. The original TE Connectivity 6609026-8 operates from -10°C to 40°C. Temperature-critical applications should confirm operating range compatibility with Curtis Industries technical documentation.