Amphenol ICC 65863-267 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 65863-267 is a rectangular connector header designed for through-hole mounting applications. This 16-position, 2-row connector operates at 0.100" (2.54mm) pitch and features shrouded 4-wall construction with solder termination and latch lock/eject hooks. The part is currently active in production and widely used in board-to-cable/wire interconnect applications. Substitute parts may be required due to inventory availability, supply chain considerations, or specific application requirements that align with the established electrical and mechanical parameters.

Substiute Parts

65863-267

Amphenol ICC (FCI)In Stock: 102865863-267 Datasheet

Current PartRFQ

499922-3

TE Connectivity AMP ConnectorsIn Stock: 1237499922-3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Amphenol ICC 65863-267 must maintain compatibility across the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins, 16 positions in 2-row arrangement
• Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
• Mechanical Interface: Through-hole solder termination with shrouded 4-wall construction
• Fastening Mechanism: Latch lock/eject hooks for secure mating
• Contact Geometry: Square contact shape for consistent engagement
• Flammability Compliance: UL94 V-0 material rating

The TE Connectivity AMP Connectors 499922-3 meets all these critical parameters and is qualified as a direct substitute. Both parts share identical pitch, position count, row configuration, mounting method, and shrouding design. Variations in contact length, insulation height, and finish specifications remain within acceptable tolerances for standard board-to-cable/wire interconnect applications.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 65863-267 and TE Connectivity 499922-3 are active production parts with UL94 V-0 flammability compliance and MSL 1 moisture sensitivity ratings. The TE Connectivity 499922-3 provides additional specifications including operating temperature range (-65°C ~ 105°C), current rating (1A), and voltage rating (250VAC), which are not documented for the primary part. Both connectors maintain identical pitch, position count, row configuration, and mounting methodology, establishing direct mechanical and electrical compatibility for standard board-to-cable/wire interconnect applications.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the Amphenol ICC 65863-267?

A: Substitute parts must maintain identical pitch (0.100" / 2.54mm), position count (16), row configuration (2 rows), shrouding design (4-wall), mounting type (through-hole), termination method (solder), and fastening mechanism (latch lock/eject hooks). Contact shape must remain square, and flammability rating must meet UL94 V-0.

Q: Are there dimensional differences between the main part and substitute?

A: Yes. The TE Connectivity 499922-3 has a mating contact length of 0.240" (6.10mm) compared to 0.230" (5.84mm) for the Amphenol ICC 65863-267. Insulation height differs at 0.549" (13.94mm) versus 0.640" (16.26mm). These variations remain within acceptable tolerances for standard interconnect applications.

Q: What is the difference between the fastening mechanisms?

A: The Amphenol ICC 65863-267 features standard latch lock/eject hooks, while the TE Connectivity 499922-3 specifies latch lock/eject hooks with extended length. Both provide equivalent mechanical retention and mating security.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the Amphenol ICC 65863-267 and TE Connectivity 499922-3 carry MSL 1 (Unlimited) moisture sensitivity level, indicating no special moisture handling requirements during storage or assembly.

Q: What compliance certifications apply to both parts?

A: Both parts are classified under ECCN EAR99 and HTSUS 8536.69.4040. Both meet UL94 V-0 flammability requirements. The TE Connectivity 499922-3 is REACH Affected, while the Amphenol ICC 65863-267 is RoHS non-compliant.