Amphenol ICC 65863-265 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 65863-265 is a vertical rectangular connector header designed for through-hole mounting applications. This component features a 10-position, 2-row configuration with 0.100" (2.54mm) pitch spacing, shrouded design with 4-wall protection, and solder termination. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations where this connector type is required.

Substiute Parts

65863-265

Amphenol ICC (FCI)In Stock: 96865863-265 Datasheet

Current PartRFQ

499922-1

TE Connectivity AMP ConnectorsIn Stock: 1126499922-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Amphenol ICC 65863-265 is determined by strict equivalence across the following critical parameters:

• Connector type classification (Header)
• Contact type and gender (Male Pin)
• Position count and row configuration (10 positions, 2 rows)
• Mating pitch and row spacing (0.100" / 2.54mm)
• Shrouding design (Shrouded - 4 Wall)
• Mounting methodology (Through Hole)
• Termination approach (Solder)
• Fastening mechanism (Latch Lock/Eject Hooks)
• Contact geometry (Square)
• Flammability compliance (UL94 V-0)

The TE Connectivity AMP Connectors 499922-1 meets all these core substitution criteria. Variations in contact length, insulation height, contact finish specifications, and operating temperature ranges do not preclude functional equivalence when the above parameters align.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity AMP Connectors 499922-1 is the direct functional equivalent for the obsolete Amphenol ICC 65863-265. The substitute part maintains active product status, ensuring continued availability and supply chain reliability. Both components share identical core electrical and mechanical specifications: 10-position, 2-row header configuration with 0.100" pitch, shrouded 4-wall design, through-hole solder termination, and UL94 V-0 flammability compliance.

Dimensional variations exist in contact length and insulation height; however, these differences do not affect functional compatibility in standard board-to-cable/wire applications. Both parts carry MSL 1 (Unlimited) moisture sensitivity classification and share identical ECCN and HTSUS codes, indicating equivalent regulatory treatment.

The 499922-1 provides superior supply availability with 1066 pieces in current inventory compared to the obsolete 65863-265. For new designs or system refresh applications, the TE Connectivity part is the appropriate selection.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 499922-1 directly replace the Amphenol ICC 65863-265 in existing assemblies?

A: Yes. Both connectors share identical pitch spacing (0.100"), position count (10 positions, 2 rows), shrouding configuration (4-wall), mounting type (through-hole), and termination method (solder). The connectors are mechanically and electrically compatible for board-to-cable/wire applications.

Q: What are the dimensional differences between these two parts?

A: The TE Connectivity 499922-1 has a contact mating length of 0.240" (6.10mm) versus 0.230" (5.84mm) for the Amphenol part. Insulation height differs: 0.549" (13.94mm) for the TE part versus 0.640" (16.26mm) for the Amphenol part. These variations do not affect standard connector mating or board layout compatibility.

Q: Are there differences in contact finish specifications?

A: Yes. The Amphenol ICC 65863-265 specifies gold or gold GXT™ finish at 30.0µin (0.76µm) thickness on mating contacts. The TE Connectivity 499922-1 specifies gold or gold-palladium finish at 15.0µin (0.38µm) thickness. Both finishes provide adequate corrosion resistance and electrical conductivity for standard applications.

Q: What is the significance of the "Long" fastening hook designation on the TE part?

A: The TE Connectivity 499922-1 features extended latch lock/eject hooks compared to the standard Amphenol design. This provides enhanced mechanical retention and easier connector release during mating and unmating cycles.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the Amphenol ICC 65863-265 and TE Connectivity 499922-1 carry UL94 V-0 flammability ratings, MSL 1 (Unlimited) moisture sensitivity classification, and identical ECCN (EAR99) and HTSUS (8536.69.4040) codes.

Q: Why is the Amphenol part listed as obsolete?

A: The Amphenol ICC 65863-265 has reached end-of-life status. The TE Connectivity 499922-1 remains in active production, making it the recommended selection for new designs and system replacements requiring this connector type.