Amphenol ICC 65863-209 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 65863-209 is an active rectangular connector header designed for through-hole mounting applications. This 50-position, 2-row connector with 0.100" (2.54mm) pitch serves board-to-cable/wire interconnection requirements in the Quickie™ series. The part is currently in active production status with 668 units available in inventory. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component procurement flexibility while maintaining circuit performance and reliability.

Substiute Parts

65863-209

Amphenol ICC (FCI)In Stock: 71565863-209 Datasheet

Current PartRFQ

1-499374-0

TE Connectivity AMP ConnectorsIn Stock: 8831-499374-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Amphenol ICC 65863-209 is determined by strict alignment of the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins
• Position Count & Row Configuration: 50 positions arranged in 2 rows
• Pitch Specification: 0.100" (2.54mm) mating pitch with 0.100" row spacing
• Mounting & Termination: Through-hole solder termination
• Mechanical Housing: Shrouded 4-wall design with latch lock/eject hooks (short)
• Contact Geometry: Square contact shape
• Compliance & Safety: UL94 V-0 flammability rating, RoHS non-compliant status

The substitute part TE Connectivity AMP Connectors 1-499374-0 meets all critical electrical and mechanical parameters required for functional equivalence. Both parts share identical pitch, position count, row configuration, mounting method, and shrouding design. Variations in contact length dimensions and insulation height fall within acceptable tolerances for board-to-cable/wire interconnection applications.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 65863-209 and TE Connectivity 1-499374-0 maintain active production status with equivalent compliance certifications. The parts share identical electrical and mechanical specifications for pitch, position count, row configuration, mounting method, and shrouding design. Contact length variations (0.230" vs. 0.240" mating; 0.150" vs. 0.155" post) represent minor dimensional differences that do not affect functional compatibility in standard board-to-cable/wire interconnection applications. Both parts carry UL94 V-0 flammability certification and MSL 1 moisture sensitivity rating. Selection between these parts may be based on availability, packaging format (tray vs. bulk), or supply chain requirements, as electrical and mechanical performance characteristics are equivalent.

Frequently Asked Questions (FAQ)

Q: What determines if a connector can substitute for the Amphenol ICC 65863-209?

A: Substitute connectors must match the following critical parameters: 50-position, 2-row header configuration with 0.100" (2.54mm) mating pitch and row spacing, male pin contact type, through-hole solder termination, shrouded 4-wall design with short latch lock/eject hooks, square contact geometry, and UL94 V-0 flammability rating.

Q: Are the contact length differences between the main part and substitute significant?

A: The contact length variations (mating: 0.230" vs. 0.240"; post: 0.150" vs. 0.155") represent minor dimensional tolerances. These differences do not affect mating compatibility or electrical performance in standard board-to-cable/wire interconnection applications where both parts meet the same functional requirements.

Q: What is the difference between tray and bulk packaging?

A: Tray packaging organizes components in structured trays for automated handling and reduced damage during transport. Bulk packaging places components in loose form. Selection depends on assembly process requirements and handling equipment compatibility.

Q: Can these connectors be used interchangeably in existing designs?

A: Yes, the Amphenol ICC 65863-209 and TE Connectivity 1-499374-0 are mechanically and electrically equivalent for board-to-cable/wire interconnection applications. Both parts maintain identical pitch, position count, mounting type, and shrouding specifications required for PCB footprint compatibility.

Q: What does RoHS non-compliant status mean for these parts?

A: RoHS non-compliant status indicates these connectors may contain lead or other restricted substances. Both the main part and substitute share this compliance status, ensuring consistent material composition across substitution.

Q: Are there operating temperature specifications for these connectors?

A: The Amphenol ICC 65863-209 does not specify an operating temperature range in the provided data. The TE Connectivity substitute operates from -65°C to 105°C. Verify temperature requirements against your specific application needs.