Amphenol ICC 65823-362 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 65823-362 is a rectangular connector header designed for through-hole, right-angle mounting applications. This shrouded 10-position connector with 2.54mm pitch serves board-to-cable/wire interconnection requirements in the Quickie™ series. The part is currently active in production with 913 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component selection from qualified manufacturers.

Substiute Parts

65823-362

Amphenol ICC (FCI)In Stock: 93665823-362 Datasheet

Current PartRFQ

102160-1

TE Connectivity AMP ConnectorsIn Stock: 914102160-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 65823-362 is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Mating pitch (0.100" / 2.54mm)
• Position count (10 positions)
• Row configuration (2 rows)
• Row spacing (0.100" / 2.54mm)
• Mounting method (Through Hole, Right Angle)
• Shrouding configuration (Shrouded - 4 Wall)
• Termination method (Solder)
• Fastening mechanism (Push-Pull)
• Style (Board to Cable/Wire)
• Flammability compliance (UL94 V-0)

The TE Connectivity AMP Connectors part 102160-1 meets all mandatory substitution criteria. Variations in contact geometry, contact material composition, contact finish specifications, insulation material, operating temperature range, and electrical ratings are documented in the parameter comparison table below. These variations do not preclude functional substitution in applications where the substitute part's specifications satisfy the end-use requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 65823-362 and TE Connectivity 102160-1 are active production parts with unlimited moisture sensitivity ratings. Selection between these parts should be based on the following considerations:

The 65823-362 is RoHS non-compliant, while the 102160-1 carries a "Not applicable" RoHS designation. Applications subject to RoHS directives or customer specifications requiring RoHS compliance should specify the TE Connectivity part.

The TE Connectivity 102160-1 provides documented operating temperature range (-65°C to 105°C), current rating (1A per contact), and voltage rating (250VAC). The Amphenol ICC part does not specify these electrical parameters. Applications requiring explicit electrical performance documentation should reference the TE Connectivity datasheet.

Both parts feature UL94 V-0 flammability compliance and identical mating pitch, position count, row configuration, and mounting geometry. Physical differences include contact shape (circular vs. square), contact material (phosphor bronze alloy vs. brass), contact finish composition, and insulation height variance of 0.010" (0.25mm). These differences do not affect mechanical interchangeability in standard through-hole solder applications.

Frequently Asked Questions (FAQ)

Q: Are the 65823-362 and 102160-1 mechanically interchangeable?

A: Yes. Both connectors share identical mating pitch (2.54mm), position count (10), row configuration (2 rows), mounting type (through-hole right-angle), shrouding (4-wall), and fastening mechanism (push-pull). Physical dimensions vary slightly in contact length and insulation height, but these variations do not prevent mechanical substitution in standard PCB applications.

Q: What are the key differences between these parts?

A: Primary differences include contact shape (circular vs. square), contact material (phosphor bronze alloy vs. brass), contact finish composition, insulation material specification, and documented electrical ratings. The TE Connectivity part provides explicit operating temperature, current, and voltage specifications, while the Amphenol ICC part does not document these parameters.

Q: Which part should be selected for RoHS-compliant applications?

A: The Amphenol ICC 65823-362 is marked as RoHS non-compliant. The TE Connectivity 102160-1 carries a "Not applicable" RoHS designation. Applications requiring RoHS compliance should consult manufacturer documentation or select parts with explicit RoHS compliance certification.

Q: Are there electrical performance differences between these connectors?

A: The TE Connectivity 102160-1 specifies 1A per contact at 250VAC and an operating temperature range of -65°C to 105°C. The Amphenol ICC 65823-362 does not provide these electrical specifications. Applications with defined electrical requirements should reference the TE Connectivity datasheet to confirm suitability.

Q: Can these parts be used interchangeably in new designs?

A: Substitution is permissible when the end-use application requirements are satisfied by the substitute part's specifications. Design validation should confirm that differences in contact geometry, material composition, and electrical ratings do not compromise performance. Both parts are active production items with unlimited moisture sensitivity ratings suitable for standard through-hole assembly.