Amphenol ICC 65823-276 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 65823-276 is a rectangular connector header designed for through-hole, right-angle mounting applications. This shrouded 34-position connector with 2.54mm pitch serves board-to-cable/wire interconnection requirements. The part is currently active in production with 1003 units in stock. Substitute parts are identified to address inventory availability, compliance requirements, or specific application parameter needs.

Substiute Parts

65823-276

Amphenol ICC (FCI)In Stock: 104165823-276 Datasheet

Current PartRFQ

CWN-300-34-0000

CW IndustriesIn Stock: 1005CWN-300-34-0000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The CW Industries CWN-300-34-0000 qualifies as a direct substitute based on the following critical parameters:

• Identical connector type (Header) and contact type (Male Pin)
• Matching position count (34) and row configuration (2 rows)
• Identical mating pitch (0.100" / 2.54mm) and row spacing (0.100" / 2.54mm)
• Equivalent mounting method (Through Hole, Right Angle)
• Matching shrouding configuration (Shrouded - 4 Wall)
• Identical termination method (Solder) and fastening type (Push-Pull)
• Equivalent contact shape (Circular) and material flammability rating (UL94 V-0)
• Matching insulation color (Blue) and moisture sensitivity level (1 - Unlimited)

Minor variations in contact dimensions and finish specifications do not affect functional interchangeability for standard board-to-cable/wire applications.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 65823-276 and CW Industries CWN-300-34-0000 are active production parts with equivalent mechanical and electrical functionality for standard board-to-cable/wire interconnection applications.

The CW Industries CWN-300-34-0000 provides ROHS3 compliance, whereas the Amphenol ICC 65823-276 is RoHS non-compliant. Selection between these parts should be based on regulatory requirements specific to the end application and target market.

The CW Industries substitute provides documented operating temperature range (-55°C ~ 125°C) and current rating (1A), whereas the Amphenol ICC part does not specify these parameters. Applications requiring explicit thermal or current specifications should reference the CW Industries datasheet.

Both parts maintain identical core connector specifications: 34-position, 2-row configuration with 2.54mm pitch, through-hole right-angle mounting, shrouded 4-wall design, and UL94 V-0 flammability rating.

Frequently Asked Questions (FAQ)

Q: Can CWN-300-34-0000 be used as a direct replacement for 65823-276?

A: Yes. Both connectors share identical position count, pitch, row configuration, mounting type, shrouding, and termination method. The connectors are mechanically and electrically interchangeable for standard applications.

Q: What are the key differences between these two parts?

A: Primary differences include insulation material (Polyester, Glass Filled vs. Thermoplastic), contact finish thickness (15.0µin vs. 10.0µin), and RoHS compliance status (non-compliant vs. ROHS3 compliant). The CW Industries part provides documented operating temperature and current specifications.

Q: Are there dimensional compatibility concerns?

A: Contact length and insulation height show minor variations. The CWN-300-34-0000 has slightly longer mating contact length (0.240" vs. 0.230") and shorter post length (0.090" vs. 0.105"). These differences are within typical connector tolerance ranges and do not affect standard PCB mounting or mating operations.

Q: Which part should be selected for RoHS-regulated applications?

A: The CW Industries CWN-300-34-0000 is ROHS3 compliant and must be used for applications subject to RoHS directives. The Amphenol ICC 65823-276 is RoHS non-compliant.

Q: Are both parts available in equivalent quantities?

A: Current inventory shows 1003 units of the Amphenol ICC 65823-276 and 895 units of the CW Industries CWN-300-34-0000 in stock.