Amphenol ICC 65823-217 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 65823-217 is a rectangular connector header designed for through-hole, right-angle mounting applications. This shrouded 10-position connector with 2.54mm pitch serves board-to-cable/wire interconnection requirements in the Quickie™ series. The part is currently active in production with 655 units in stock. Substitute parts are identified to address inventory availability, supply chain continuity, or specific application requirements where equivalent electrical and mechanical parameters are maintained.

Substiute Parts

65823-217

Amphenol ICC (FCI)In Stock: 69965823-217 Datasheet

Current PartRFQ

102160-1

TE Connectivity AMP ConnectorsIn Stock: 914102160-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The TE Connectivity AMP Connectors 102160-1 is identified as a manufacturer-recommended substitute for the Amphenol ICC 65823-217. Substitution eligibility is determined by the following critical parameters that must remain constant:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 10
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Fastening Type: Push-Pull
• Material Flammability Rating: UL94 V-0
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The 102160-1 maintains all critical electrical and mechanical parameters required for direct substitution in applications designed for the 65823-217.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 65823-217 and TE Connectivity 102160-1 are active production parts with UL94 V-0 flammability certification and MSL 1 rating. Both maintain REACH Affected status and EAR99 export classification. The 102160-1 provides documented operating temperature range (-65°C ~ 105°C) and electrical ratings (1A per contact, 250VAC), whereas the 65823-217 does not specify these parameters. Selection between these parts should be based on design requirements for operating temperature and current/voltage specifications, as well as inventory availability and lead time considerations.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 102160-1 be used as a direct replacement for the Amphenol ICC 65823-217?

A: Yes. Both parts maintain identical critical parameters: 10-position, 2-row configuration with 0.100" (2.54mm) pitch, through-hole right-angle mounting, shrouded 4-wall design, solder termination, and push-pull fastening. Both are UL94 V-0 rated and MSL 1 classified.

Q: What are the differences between these two parts?

A: Differences include contact shape (circular vs. square), contact material (phosphor bronze alloy vs. brass), contact finish (gold/GXT™ vs. gold/gold-palladium), insulation material specification, and insulation color. The 102160-1 specifies operating temperature (-65°C ~ 105°C) and electrical ratings (1A per contact, 250VAC), while the 65823-217 does not provide these specifications.

Q: Are there dimensional differences that affect PCB layout?

A: Minor dimensional variations exist. The 102160-1 has slightly longer mating contact length (0.240" vs. 0.230") and greater insulation height (0.315" vs. 0.305"). These differences are within typical manufacturing tolerances but should be verified against specific board design constraints.

Q: Do both parts have the same compliance certifications?

A: Both parts are UL94 V-0 rated, MSL 1 classified, REACH Affected, and EAR99 classified. The 65823-217 is RoHS non-compliant, while the 102160-1 status is not applicable.

Q: Which part should be selected for new designs?

A: Selection should be based on documented operating temperature and electrical requirements. The 102160-1 provides explicit specifications for operating temperature range and current/voltage ratings. Verify compatibility with mating connectors and cable assemblies designed for either the Quickie™ or AMP-Latch series.