Equivalent & Substitute Parts for Amphenol ICC 65801-141LF

Part Overview

The Amphenol ICC 65801-141LF is a 12-position CIC (Clincher) connector receptacle with 0.100" (2.54mm) pitch, designed for flat flexible cable (FFC) applications. This component features IDC (Insulation Displacement Contact) termination and is rated for 500V operation across a temperature range of -65°C to 105°C. The part is classified as obsolete, making equivalent substitutes necessary for ongoing design support and procurement continuity.

Substiute Parts

65801-141LF

Amphenol ICC (FCI)In Stock: 103565801-141LF Datasheet

Current PartRFQ

0015474124

MolexIn Stock: 7390015474124 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Amphenol ICC 65801-141LF is determined by the following critical parameters:

Mandatory Matching Parameters:

• Connector type: CIC/FFC receptacle
• Number of positions: 12
• Pitch: 0.100" (2.54mm)
• Mounting configuration: Free Hanging (In-Line)
• Termination method: IDC
• Contact finish thickness: 30.0µin (0.76µm)
• Material flammability rating: UL94 V-0
• Moisture sensitivity level: MSL 1

Allowable Parameter Variations:

• Voltage rating: Substitute must meet or exceed 500V requirement
• Operating temperature range: Substitute must cover or exceed -65°C to 105°C range
• Current rating: Substitute must meet or exceed 2A requirement
• Mating cycles: Substitute must meet or exceed 100 cycles requirement
• FFC thickness tolerance: Substitute must accommodate 0.33mm cable or compatible range
• Contact material and housing material: May differ if electrical and mechanical performance requirements are maintained

The Molex 0015474124 qualifies as a substitute based on these criteria.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0015474124 serves as an active substitute for the obsolete Amphenol ICC 65801-141LF. Both components share identical mechanical and electrical interfaces: 12-position CIC receptacle configuration, 0.100" (2.54mm) pitch, free-hanging in-line mounting, and IDC termination. Both maintain UL94 V-0 flammability rating and MSL 1 moisture sensitivity classification.

Key considerations for selection:

Voltage Rating Differential: The Amphenol ICC part is rated for 500V while the Molex substitute is rated for 250V. Applications operating at voltages between 250V and 500V require verification that the Molex part meets the specific voltage requirement.

Operating Temperature Range: The Amphenol ICC part operates from -65°C to 105°C, while the Molex substitute operates from -40°C to 105°C. Applications requiring operation below -40°C are not suitable for the Molex substitute.

Mating Cycle Rating: The Amphenol ICC part is rated for 100 mating cycles, while the Molex substitute is rated for 50 cycles. Applications requiring more than 50 mating cycles should be evaluated against the Molex specification.

Compliance Status: The Molex 0015474124 is actively manufactured and ROHS3 compliant, providing long-term availability and regulatory compliance advantages over the obsolete Amphenol ICC part.

FFC Thickness Compatibility: The Molex part accommodates FFC thickness of 0.13 ~ 0.28mm and 0.30mm, which is compatible with the 0.33mm specification of the original part within standard manufacturing tolerances.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0015474124 directly replace the Amphenol ICC 65801-141LF in all applications?

A: Direct replacement is possible for applications where voltage requirements do not exceed 250V, operating temperatures remain above -40°C, and mating cycles do not exceed 50. For applications exceeding any of these parameters, the substitute does not meet the original specification and alternative solutions must be evaluated.

Q: What is the significance of the voltage rating difference between these two parts?

A: The Amphenol ICC part is rated for 500V operation, while the Molex substitute is rated for 250V. This difference reflects the maximum voltage the connector can safely withstand without risk of electrical breakdown. Applications operating at voltages above 250V require the original part or an alternative rated for the required voltage.

Q: Are there compatibility issues with FFC cable thickness?

A: The Molex 0015474124 accommodates FFC thickness of 0.13 ~ 0.28mm and 0.30mm. The original Amphenol ICC part specifies 0.33mm. The 0.30mm specification of the Molex part is within standard manufacturing tolerance of the 0.33mm requirement and is considered compatible for most applications. However, cables manufactured to the upper tolerance of 0.33mm may require verification for proper seating.

Q: What does the lower mating cycle rating of the Molex part mean for product reliability?

A: The Molex substitute is rated for 50 mating cycles compared to 100 cycles for the original part. This indicates the number of times the connector can be mated and unmated while maintaining electrical and mechanical performance. Applications requiring frequent connector cycling should verify that 50 cycles meets the application requirement.

Q: Why is the Molex part listed as active while the Amphenol ICC part is obsolete?

A: Product status reflects the manufacturer's current production and support status. The Amphenol ICC 65801-141LF is no longer manufactured or supported by the original manufacturer. The Molex 0015474124 is actively produced and supported, ensuring availability for new designs and ongoing procurement.

Q: Does the Molex part meet current regulatory compliance standards?

A: Yes, the Molex 0015474124 is ROHS3 compliant, meeting current regulatory requirements for hazardous substance restrictions. The original Amphenol ICC part does not specify RoHS compliance status.