Amphenol ICC 65692-058 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 65692-058 is a shrouded rectangular connector header designed for through-hole mounting applications. This 60-position, 2-row connector with 0.100" (2.54mm) pitch provides board-to-cable/wire connectivity with solder termination and push-pull fastening. The part is classified as obsolete, making identification of active equivalent components essential for ongoing production and maintenance applications.

Substiute Parts

65692-058

Amphenol ICC (FCI)In Stock: 117765692-058 Datasheet

Current PartRFQ

65692-058LF

Amphenol ICC (FCI)In Stock: 75465692-058LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 65692-058LF serves as a direct equivalent to the 65692-058 based on the following critical substitution parameters:

• Identical connector type, contact configuration, and mating pitch (0.100" / 2.54mm)
• Matching position count (60 positions, 2 rows) and row spacing
• Identical shrouding design (4-wall shrouded) and mounting method (through-hole)
• Matching termination (solder) and fastening mechanism (push-pull)
• Identical contact material (phosphor bronze) and mating finish (gold, GXT™)
• Matching insulation material (polyester, glass-filled) and flammability rating (UL94 V-0)

The primary distinction is product status: the 65692-058 is obsolete, while the 65692-058LF is active. The 65692-058LF also carries RoHS compliance, whereas the original part is RoHS non-compliant.

Parameter Comparison

Engineering Selection Recommendations

The 65692-058LF is the direct active equivalent for the obsolete 65692-058. Both parts maintain identical electrical and mechanical specifications across all critical connector parameters. The substitution is valid for all applications where the original part was specified.

For new designs and ongoing production, the 65692-058LF is the appropriate selection due to its active product status and RoHS compliance. The RoHS compliance of the 65692-058LF aligns with current regulatory requirements for electronic components in most markets.

Both parts carry UL94 V-0 flammability certification and unlimited moisture sensitivity rating (MSL 1), ensuring compatibility in equivalent environmental conditions.

Frequently Asked Questions (FAQ)

Q: Can the 65692-058LF directly replace the 65692-058 in existing designs?

A: Yes. The 65692-058LF is a direct equivalent with identical mating pitch (0.100" / 2.54mm), position count (60 positions, 2 rows), shrouding configuration (4-wall shrouded), and all contact specifications. No design modifications are required.

Q: What is the primary difference between these two parts?

A: The 65692-058 is obsolete, while the 65692-058LF is an active product. Additionally, the 65692-058LF is RoHS compliant, whereas the original part is RoHS non-compliant.

Q: Are the packaging specifications different?

A: The 65692-058 packaging is not specified in the available data. The 65692-058LF is supplied in bulk packaging.

Q: Do both parts have the same contact finish and material specifications?

A: Yes. Both parts feature phosphor bronze contact material with gold GXT™ mating finish at 30.0µin (0.76µm) thickness, identical contact lengths, and matching insulation materials (polyester, glass-filled).

Q: Are there any environmental or compliance differences?

A: Both parts carry UL94 V-0 flammability rating and MSL 1 (unlimited moisture sensitivity). The 65692-058LF adds RoHS compliance, which is relevant for applications subject to RoHS regulations.

Q: What is the through-hole mounting compatibility?

A: Both parts are through-hole mounted with solder termination and push-pull fastening. The mechanical footprint and PCB hole pattern are identical.