Amphenol ICC 65692-020 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 65692-020 is a shrouded rectangular connector header designed for through-hole mounting in board-to-cable/wire applications. This 34-position, 2-row connector operates at 0.100" (2.54mm) pitch and features gold-plated phosphor bronze contacts with a push-pull fastening mechanism. The part is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement planning.

Substiute Parts

65692-020

Amphenol ICC (FCI)In Stock: 90165692-020 Datasheet

Current PartRFQ

65692-020LF

Amphenol ICC (FCI)In Stock: 90365692-020LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 65692-020 is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Position count (34 positions)
• Row configuration (2 rows)
• Mating pitch (0.100" / 2.54mm)
• Row spacing (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Shrouding configuration (Shrouded - 4 Wall)
• Termination method (Solder)
• Fastening mechanism (Push-Pull)
• Contact material and finish specifications
• Insulation material and flammability rating

The 65692-020LF meets all these criteria and is therefore a direct functional equivalent. The primary distinction between these parts is product status and RoHS compliance classification.

Parameter Comparison

Engineering Selection Recommendations

The 65692-020LF is the direct substitute for the obsolete 65692-020. Both parts are manufactured by Amphenol ICC within the Quickie™ series and share identical electrical and mechanical specifications across all critical parameters.

The 65692-020LF carries Active product status, ensuring ongoing availability and supply chain continuity. Additionally, the 65692-020LF is RoHS Compliant, meeting current regulatory requirements for new designs and procurement cycles. The 65692-020 is classified as RoHS non-compliant, which may restrict its use in applications subject to RoHS directives.

For new designs, procurement of replacement stock, or long-term production planning, the 65692-020LF is the appropriate selection. Both parts maintain identical contact geometry, pitch specifications, shrouding configuration, and termination characteristics, ensuring direct mechanical and electrical interchangeability.

Frequently Asked Questions (FAQ)

Q: Are the 65692-020 and 65692-020LF mechanically interchangeable?

A: Yes. Both parts are identical in connector type, position count, pitch, row spacing, shrouding, mounting method, and contact geometry. They are direct mechanical equivalents.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and RoHS compliance. The 65692-020 is obsolete and RoHS non-compliant. The 65692-020LF is active and RoHS Compliant. All electrical and mechanical specifications are identical.

Q: Can I use the 65692-020LF as a replacement for the 65692-020 in existing designs?

A: Yes. The 65692-020LF is a direct functional equivalent and can be used as a replacement without design modifications.

Q: What does the "LF" suffix in 65692-020LF indicate?

A: The "LF" suffix typically indicates lead-free or RoHS-compliant variants in component nomenclature. In this case, the 65692-020LF is RoHS Compliant.

Q: Are there any differences in contact finish or material composition?

A: No. Both parts use phosphor bronze contacts with gold GXT™ finish at 30.0µin (0.76µm) thickness. Contact material and finish specifications are identical.

Q: What is the packaging difference between these parts?

A: The 65692-020 packaging is listed as unspecified. The 65692-020LF is supplied in Bulk packaging.

Q: Do both parts meet the same flammability and compliance standards?

A: Yes. Both parts carry UL94 V-0 material flammability rating, EAR99 ECCN classification, and 8536.69.4040 HTSUS code. Moisture Sensitivity Level is 1 (Unlimited) for both.