Amphenol ICC 65692-008LF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 65692-008LF is an active rectangular connector header designed for through-hole mounting applications. This shrouded 20-position header with 0.100" (2.54mm) pitch serves board-to-cable/wire interconnection requirements. The part is RoHS Compliant and carries UL94 V-0 flammability rating. Substitute parts are identified to address inventory availability, extended operating temperature ranges, or specific mechanical height requirements while maintaining core electrical and mechanical compatibility.

Substiute Parts

65692-008LF

Amphenol ICC (FCI)In Stock: 118665692-008LF Datasheet

Current PartRFQ

ZST-110-01-T-D-515

Samtec Inc.In Stock: 889ZST-110-01-T-D-515 Datasheet

MFR RecommendedRFQ

ZST-110-02-T-D-515

Samtec Inc.In Stock: 890ZST-110-02-T-D-515 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 65692-008LF is determined by the following core parameters that must remain constant across all alternatives:

• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 20
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Connector Type: Header with Male Pin contacts
• Shrouding: Shrouded - 4 Wall configuration
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Shape: Square
• Contact Material: Phosphor Bronze
• Insulation Material: Polyester, Glass Filled
• Features: Keying Slot
• Material Flammability Rating: UL94 V-0

The identified substitute parts (ZST-110-01-T-D-515 and ZST-110-02-T-D-515) from Samtec Inc. maintain all critical parameters. Variations in contact length dimensions and insulation height reflect different mechanical stack heights, which do not affect electrical compatibility in standard board-to-cable/wire applications. Both substitutes provide extended operating temperature range (-55°C ~ 105°C) and specified current rating (3.4A per Contact).

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and meet UL94 V-0 flammability requirements. The 65692-008LF features gold plating on mating contacts, while both Samtec substitutes employ tin finish. The Samtec ZST-110 series provides documented operating temperature range (-55°C ~ 105°C) and current rating (3.4A per Contact), specifications not provided for the original part.

Selection between ZST-110-01-T-D-515 and ZST-110-02-T-D-515 depends on PCB stack-up requirements. The ZST-110-01-T-D-515 offers a shorter post length (0.115"), resulting in 0.630" overall contact length. The ZST-110-02-T-D-515 provides extended post length (0.215"), yielding 0.730" overall contact length. Both maintain identical mating contact length (0.250") and insulation height (0.515"), ensuring consistent mating interface geometry.

All parts carry ROHS3/RoHS Compliant status and MSL 1 (Unlimited) moisture sensitivity rating, suitable for standard manufacturing and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can ZST-110-01-T-D-515 or ZST-110-02-T-D-515 directly replace 65692-008LF in existing designs?

A: Both Samtec parts maintain identical mating pitch (0.100"), position count (20), row configuration (2), and shrouded 4-wall geometry. Electrical and mechanical mating interfaces are compatible. Differences in post length and overall contact length require PCB design verification to confirm adequate solder pad depth and clearance to adjacent components.

Q: What is the difference between ZST-110-01-T-D-515 and ZST-110-02-T-D-515?

A: Both parts are identical except for contact post length. ZST-110-01-T-D-515 has 0.115" post length (0.630" overall), while ZST-110-02-T-D-515 has 0.215" post length (0.730" overall). Selection depends on PCB thickness and solder joint requirements.

Q: Why does the original part specify gold plating while substitutes use tin?

A: Contact finish differences do not affect mating compatibility. Gold plating provides enhanced corrosion resistance in high-humidity or corrosive environments. Tin finish is standard for general-purpose applications and meets equivalent electrical performance requirements.

Q: Are operating temperature specifications critical for substitution?

A: The original 65692-008LF does not specify operating temperature range. Samtec substitutes document -55°C ~ 105°C operation. If the application requires operation outside this range, the original part specifications must be obtained from Amphenol ICC to confirm compatibility.

Q: Do all three parts meet RoHS compliance requirements?

A: Yes. The 65692-008LF is RoHS Compliant. Both Samtec substitutes are ROHS3 Compliant, which represents current RoHS Directive compliance. All parts carry MSL 1 (Unlimited) moisture sensitivity rating.