Amphenol ICC 65692-003 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 65692-003 is a shrouded rectangular connector header designed for through-hole mounting in board-to-cable/wire applications. This vertical 10-position header operates at 0.100" (2.54mm) pitch with dual-row configuration and solder termination. The part is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and component procurement.

Substiute Parts

65692-003

Amphenol ICC (FCI)In Stock: 85165692-003 Datasheet

Current PartRFQ

65692-003LF

Amphenol ICC (FCI)In Stock: 104365692-003LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 65692-003 is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Position count (10 positions)
• Row configuration (2 rows)
• Mating pitch (0.100" / 2.54mm)
• Row spacing (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Shrouding configuration (Shrouded - 4 Wall)
• Termination method (Solder)
• Contact finish specification (Gold, GXT™)
• Contact material (Phosphor Bronze)
• Insulation material (Polyester, Glass Filled)
• Flammability rating (UL94 V-0)

The substitute part 65692-003LF maintains identical electrical and mechanical specifications across all these parameters, with the primary distinction being product status and RoHS compliance.

Parameter Comparison

Engineering Selection Recommendations

The 65692-003LF serves as the direct functional equivalent to the obsolete 65692-003. Both parts are manufactured by Amphenol ICC within the Quickie™ series and maintain identical electrical and mechanical specifications across all connector parameters.

The primary distinction between these parts is regulatory compliance status. The 65692-003LF is RoHS Compliant and carries Active product status, whereas the 65692-003 is RoHS non-compliant and classified as Obsolete. For new designs or ongoing production requiring compliance with RoHS directives, the 65692-003LF is the appropriate selection. Both parts share identical contact geometry, pitch specifications, shrouding configuration, and material composition, ensuring direct mechanical and electrical interchangeability in board-to-cable/wire applications.

Frequently Asked Questions (FAQ)

Q: Are the 65692-003 and 65692-003LF mechanically interchangeable?

A: Yes. Both parts maintain identical dimensions, pitch specifications (0.100" / 2.54mm), row spacing, contact geometry, and mounting configuration. They are direct mechanical equivalents.

Q: What is the difference between these two part numbers?

A: The 65692-003LF incorporates RoHS-compliant materials and processes, while the 65692-003 does not. The 65692-003 is classified as Obsolete; the 65692-003LF is Active. All electrical and mechanical specifications remain identical.

Q: Can I use the 65692-003LF as a replacement for the 65692-003 in existing designs?

A: Yes. The 65692-003LF is electrically and mechanically equivalent. If your application or supply chain requires RoHS compliance, the 65692-003LF is the appropriate selection.

Q: What does the "LF" suffix indicate?

A: The "LF" suffix typically indicates Lead-Free processing, which aligns with RoHS compliance requirements. The 65692-003LF maintains all other specifications of the base 65692 series.

Q: Are there any performance differences between these parts?

A: No. Both parts are rated for identical electrical and mechanical performance. Contact material, finish specification, flammability rating, and all dimensional parameters are equivalent.

Q: What is the Moisture Sensitivity Level (MSL) for these connectors?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.