Request Quote
(Ships tomorrow)
650987-5 DIN Connector Plug 96 Position Equivalent & Substitute Parts
Part Overview
The TE Connectivity AMP Connectors 650987-5 is a 96 Position DIN Connector Plug with male pins, gold plating, and right-angle through-hole mounting. This backplane connector is part of the Eurocard series and features a ground plate with solder termination. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance and new design implementations. Substitute parts must maintain electrical and mechanical compatibility across the 96-position configuration, 0.100" pitch, three-row layout, and operating temperature range.
Substiute Parts
Key Parameters
| Parameter | Specification |
|---|---|
| Connector Type | Plug, Male Pins |
| Number of Positions | 96 |
| Pitch | 0.100" (2.54mm) |
| Number of Rows | 3 |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Contact Finish | Gold |
| Operating Temperature | -55°C ~ 125°C |
| Material Flammability Rating | UL94 V-0 |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution of the 650987-5 is determined by strict adherence to the following electrical and mechanical parameters:
Critical Compatibility Parameters:
- Number of Positions: 96 (all positions loaded)
- Pitch: 0.100" (2.54mm)
- Number of Rows: 3
- Mounting Type: Through Hole, Right Angle
- Termination: Solder
- Operating Temperature Range: -55°C ~ 125°C
- Material Flammability Rating: UL94 V-0
- Contact Finish: Gold
Substitute parts are grouped into two categories:
Direct Substitute (Header Configuration): Part 5650987-5 maintains identical electrical and mechanical specifications with the exception of connector type (Header instead of Plug). This part is active and RoHS compliant, providing a direct functional equivalent.
Similar Substitutes (Amphenol ICC/FCI Series 8609): Parts 86093967113745E1LF, 86093967113755DHLF, 86093967113765BALF, 86093967113765E1LF, 86093967113785E1LF, 86093967113785ELF, 86093967113H55E1LF, and 86093967113H55STLF maintain all critical parameters including 96 positions, 0.100" pitch, three-row configuration, right-angle through-hole mounting, solder termination, gold contact finish, and -55°C to 125°C operating temperature. These parts are active products with RoHS compliance. Variations exist in Level/Class ratings, features (Board Lock on certain models), and current ratings (1.5A), but all satisfy the core substitution criteria.
Parameter Comparison
| Parameter | 650987-5 (Main) | 5650987-5 | 121A10149X | 86093967113745E1LF | 86093967113H55E1LF |
|---|---|---|---|---|---|
| Manufacturer | TE Connectivity AMP | TE Connectivity AMP | Amphenol CONEC | Amphenol ICC (FCI) | Amphenol ICC (FCI) |
| Connector Type | Plug, Male Pins | Header, Male Pins | Header, Male Pins | Header, Male Pins | Header, Male Pins |
| Number of Positions | 96 | 96 | 96 | 96 | 96 |
| Pitch | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) |
| Number of Rows | 3 | 3 | 3 | 3 | 3 |
| Style | C | C | C | C | C |
| Level, Class | 2 | 2 | 3 | 3 | 2 |
| Mounting Type | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle |
| Termination | Solder | Solder | Solder | Solder | Solder |
| Contact Finish | Gold | Not Specified | Gold | Gold | Gold |
| Operating Temperature | -55°C ~ 125°C | Not Specified | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C |
| Current Rating (Amps) | Not Specified | Not Specified | 2A | 1.5A | 1.5A |
| Material Flammability Rating | UL94 V-0 | Not Specified | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| Material - Insulation | Polymer Thermoplastic, Glass Filled | Polymer Thermoplastic, Glass Filled | Polybutylene Terephthalate (PBT), Glass Filled | Polyester Thermoplastic | Polyester Thermoplastic |
| Product Status | Obsolete | Active | Obsolete | Active | Active |
| RoHS Status | RoHS non-compliant | RoHS Compliant | ROHS3 Compliant | RoHS Compliant | RoHS Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) | 1 (Unlimited) | Not Applicable | 1 (Unlimited) | 1 (Unlimited) |
Engineering Selection Recommendations
For Direct Replacement (Plug to Header Conversion):
Part 5650987-5 is the primary direct substitute from TE Connectivity AMP Connectors. This part maintains identical mechanical and electrical specifications with the exception of connector type (Header configuration). The part is active and RoHS compliant, addressing the obsolescence of the original 650987-5. Selection of this part is appropriate when system design permits header-type connector substitution.
For Active Product Alternatives (Amphenol ICC/FCI Series 8609):
The Amphenol ICC (FCI) Series 8609 backplane connectors provide multiple active product alternatives. All variants listed (86093967113745E1LF, 86093967113755DHLF, 86093967113765BALF, 86093967113765E1LF, 86093967113785E1LF, 86093967113785ELF, 86093967113H55E1LF, 86093967113H55STLF) satisfy the core electrical and mechanical requirements of the 650987-5. These parts are RoHS compliant and currently in active production status.
Compliance Considerations:
The original 650987-5 is RoHS non-compliant. All recommended substitutes are RoHS compliant, supporting compliance requirements for new designs and system upgrades. The Amphenol ICC (FCI) parts carry REACH Affected or REACH Unaffected status as specified; TE Connectivity 5650987-5 carries Vendor Undefined REACH status.
Product Status Priority:
Active product status is preferred for long-term availability. Part 5650987-5 and all Amphenol ICC (FCI) Series 8609 variants are active products. Part 121A10149X (Amphenol CONEC) is obsolete and should be considered only when other active alternatives are unavailable.
Frequently Asked Questions (FAQ)
Q: Can the 650987-5 Plug be directly replaced with the 5650987-5 Header?
A: The 5650987-5 Header maintains all critical electrical and mechanical parameters (96 positions, 0.100" pitch, three rows, right-angle through-hole mounting, solder termination, gold contact finish, -55°C to 125°C operating temperature). The primary difference is connector type (Header vs. Plug). Substitution is valid when the system design accommodates header-type connectors.
Q: What are the key parameters that determine substitution compatibility?
A: Substitution compatibility is determined by: 96-position configuration, 0.100" (2.54mm) pitch, three-row layout, right-angle through-hole mounting, solder termination, gold contact finish, and -55°C to 125°C operating temperature range. All listed substitute parts maintain these parameters.
Q: Are the Amphenol ICC (FCI) Series 8609 parts suitable replacements?
A: Yes. All Series 8609 variants listed (86093967113745E1LF, 86093967113755DHLF, 86093967113765BALF, 86093967113765E1LF, 86093967113785E1LF, 86093967113785ELF, 86093967113H55E1LF, 86093967113H55STLF) maintain the critical electrical and mechanical specifications. These parts are active products with RoHS compliance. Variations in Level/Class ratings and features (such as Board Lock) do not affect core substitution compatibility.
Q: What is the difference between Level/Class ratings in the substitute parts?
A: Level/Class ratings (1, 2, or 3) are specified in the product data but do not affect the core electrical and mechanical compatibility for substitution purposes. Selection among parts with different Level/Class ratings should be based on specific application requirements beyond the scope of this substitution reference.
Q: Why is the original 650987-5 marked as obsolete?
A: Obsolescence indicates the part is no longer in active production. Active substitutes such as 5650987-5 and the Amphenol ICC (FCI) Series 8609 variants provide equivalent functionality for ongoing system support and new designs.
Q: Are there packaging differences among the substitute parts?
A: Yes. The 650987-5 is packaged in bulk; 5650987-5 is packaged in bulk; 121A10149X is packaged in tray; and all Amphenol ICC (FCI) Series 8609 parts are packaged in tray. Packaging selection should be based on procurement and inventory requirements.
Q: What is the significance of RoHS compliance in these substitutes?
A: The original 650987-5 is RoHS non-compliant. All recommended substitutes are RoHS compliant, meeting regulatory requirements for new designs and system upgrades. RoHS compliance is mandatory for many applications and markets.
Q: Do all substitute parts have the same current rating?
A: No. The original 650987-5 does not specify a current rating. Substitute parts vary: 121A10149X is rated at 2A; Amphenol ICC (FCI) Series 8609 parts are rated at 1.5A. Current rating specifications should be verified against application requirements.
Q: What is the Board Lock feature on certain Amphenol ICC (FCI) parts?
A: Board Lock is a mechanical feature present on parts 86093967113H55E1LF and 86093967113H55STLF. This feature does not affect electrical compatibility but provides additional mechanical retention. Selection should be based on application-specific mechanical requirements.
Q: Can the 650987-5 be used interchangeably with 121A10149X?
A: Both parts maintain the 96-position, 0.100" pitch, three-row, right-angle through-hole configuration with solder termination and gold contact finish. However, 121A10149X is obsolete (Amphenol CONEC), while active alternatives are available. The 121A10149X should be selected only when other active substitutes are unavailable.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts