TE Connectivity 650933-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 650933-5 is a 96-position DIN plug connector for backplane applications, featuring male pins with gold plating and through-hole solder termination. This connector operates within the Eurocard series and is classified as an active product. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part is unavailable or when alternative compliance profiles are required.

Substiute Parts

650933-5

TE Connectivity AMP ConnectorsIn Stock: 993650933-5 Datasheet

Current PartRFQ

5650933-5

TE Connectivity AMP ConnectorsIn Stock: 19175650933-5 Datasheet

DirectRFQ

86092645814745ELF

Amphenol ICC (FCI)In Stock: 86486092645814745ELF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 650933-5 are identified based on strict alignment of electrical and mechanical parameters. The primary substitution criteria include connector type, pitch, mounting method, termination style, contact finish, operating temperature range, and flammability rating.

Direct Substitute (5650933-5): This part maintains identical electrical and mechanical specifications to the main part, including 96 positions, 64 loaded positions, 3-row configuration, 0.100" pitch, through-hole mounting, solder termination, gold contact finish, and -55°C to 125°C operating range. The primary distinction is RoHS compliance status and insulation material composition.

Similar Substitute (86092645814745ELF): This part shares core electrical and mechanical compatibility parameters including pitch (0.100"), mounting type (through hole), termination (solder), contact finish (gold), operating temperature range (-55°C to 125°C), and flammability rating (UL94 V-0). However, this part differs in connector type (header versus plug), number of positions (64 versus 96), row configuration (2 rows versus 3 rows), and style designation (Q versus R). This part is suitable only for applications where the reduced position count and alternative connector geometry are acceptable.

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution: The TE Connectivity 5650933-5 is the primary equivalent substitute for the 650933-5. Both parts maintain identical connector geometry, position count, row configuration, and electrical specifications. Selection between these parts is determined by regulatory compliance requirements. The 5650933-5 is RoHS compliant, whereas the 650933-5 is RoHS non-compliant. Applications subject to RoHS directives or requiring compliant component documentation should specify the 5650933-5. Both parts are active products with established supply availability.

For Similar Substitution: The Amphenol ICC 86092645814745ELF shares fundamental electrical and thermal characteristics but differs in physical configuration. This part is suitable only for applications where the reduced position count (64 versus 96), header connector type (versus plug), and 2-row configuration (versus 3-row) are compatible with the circuit board layout and mating interface. This part is RoHS compliant and carries a current rating specification (1.5A) not provided for the main part. Use of this substitute requires verification that the application circuit board accommodates the alternative connector geometry and position arrangement.

Frequently Asked Questions (FAQ)

Q: Can the 5650933-5 be used as a direct replacement for the 650933-5?

A: Yes. The 5650933-5 maintains identical electrical and mechanical specifications, including 96 positions, 64 loaded positions, 3-row configuration, 0.100" pitch, through-hole mounting, solder termination, and gold contact finish. The primary difference is RoHS compliance status. Direct substitution is valid when the application does not require RoHS non-compliant components.

Q: What are the limitations of using the 86092645814745ELF as a substitute?

A: The 86092645814745ELF differs in three critical parameters: connector type (header versus plug), position count (64 versus 96), and row configuration (2 rows versus 3 rows). This part is suitable only for applications where these differences are compatible with the existing circuit board design and mating connector interface. The reduced position count may not accommodate all signal requirements of the original design.

Q: Are all three parts compatible with the same mating connectors?

A: No. The 650933-5 and 5650933-5 are plug connectors with identical geometry and are compatible with the same mating receptacles. The 86092645814745ELF is a header connector with different physical dimensions and row arrangement, requiring a different mating connector type.

Q: What is the significance of the RoHS compliance difference between 650933-5 and 5650933-5?

A: RoHS compliance indicates the absence of restricted substances (lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) in the component. The 5650933-5 is RoHS compliant; the 650933-5 is not. Applications subject to RoHS directives, environmental regulations, or customer specifications requiring compliant components must use the 5650933-5.

Q: Do all substitute parts support the same operating temperature range?

A: Yes. All three parts operate within the -55°C to 125°C temperature range and carry the UL94 V-0 flammability rating, ensuring thermal and safety compatibility across the product group.

Q: What packaging differences exist between these parts?

A: The 650933-5 and 5650933-5 are supplied in bulk packaging. The 86092645814745ELF is supplied in tray packaging. Packaging selection may affect inventory management, handling procedures, and component counting during assembly operations.

Q: Can the 86092645814745ELF be used if only 64 positions are required?

A: The 86092645814745ELF provides 64 positions with all positions loaded. If the application requires only 64 positions and the header connector type and 2-row configuration are compatible with the circuit board design, this part is suitable. However, the original 650933-5 design specifies 96 total positions with 64 loaded, indicating the board layout accommodates a 3-row plug connector. Substitution requires confirmation that the circuit board can accept the alternative header geometry.