TE Connectivity 650910-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 650910-5 is a 120-position DIN plug connector from the Eurocard series, designed for backplane applications with through-hole solder termination. This connector features male pins with gold contact finish and is rated for operating temperatures from -55°C to 125°C. The part is currently active in production with 1050 pieces available in inventory.

Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable, while maintaining electrical and mechanical compatibility within the specified parameter constraints.

Substiute Parts

650910-5

TE Connectivity AMP ConnectorsIn Stock: 1093650910-5 Datasheet

Current PartRFQ

5650910-5

TE Connectivity AMP ConnectorsIn Stock: 13645650910-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 650910-5 is determined by strict equivalence across the following critical parameters:

• Connector Type: Must be Plug with Male Pins
• Position Count: Must be 120 positions
• Pitch Spacing: Must be 0.100" (2.54mm)
• Row Configuration: Must be 3 rows
• Mounting Method: Must be Through Hole
• Termination Type: Must be Solder
• Contact Finish: Must be Gold
• Operating Temperature Range: Must support -55°C to 125°C
• Flammability Rating: Must meet UL94 V-0
• Series Classification: Must be Eurocard series

The substitute part 5650910-5 meets all these criteria and is therefore classified as a direct equivalent for the 650910-5.

Parameter Comparison

Engineering Selection Recommendations

Both the 650910-5 and 5650910-5 are functionally equivalent 120-position DIN plug connectors from TE Connectivity's Eurocard series. Selection between these parts should be based on the following criteria:

Primary Part (650910-5): Select this part number when RoHS non-compliant components are acceptable for the application and when the specific polyester glass-filled insulation material is required.

Substitute Part (5650910-5): Select this part number when RoHS compliance is required for the end application. The substitute offers improved regulatory compliance with polymer thermoplastic glass-filled insulation while maintaining all critical electrical and mechanical parameters. The substitute also provides higher inventory availability (1271 pieces versus 1050 pieces).

Both parts maintain identical electrical performance, mechanical compatibility, and thermal operating range. The insulation material difference between polyester and polymer thermoplastic does not affect functional compatibility in backplane connector applications where both materials meet UL94 V-0 flammability requirements.

Frequently Asked Questions (FAQ)

Q: Are the 650910-5 and 5650910-5 interchangeable in PCB designs?

A: Yes. Both connectors are mechanically and electrically identical 120-position DIN plugs with 0.100" pitch, 3-row configuration, and through-hole solder termination. They are direct substitutes for each other in backplane connector applications.

Q: What is the difference in insulation material between these parts?

A: The 650910-5 uses polyester glass-filled insulation, while the 5650910-5 uses polymer thermoplastic glass-filled insulation. Both materials meet UL94 V-0 flammability requirements and maintain the same operating temperature range of -55°C to 125°C. The material difference does not affect electrical performance or mechanical compatibility.

Q: Does the RoHS compliance difference affect part selection?

A: The 5650910-5 is RoHS compliant, while the 650910-5 is RoHS non-compliant. If the end application or customer requirements mandate RoHS compliance, the 5650910-5 must be selected. For applications without RoHS requirements, either part is acceptable.

Q: Can these connectors be used in high-temperature applications?

A: Both connectors are rated for operating temperatures from -55°C to 125°C. This temperature range is suitable for industrial and commercial backplane applications within these limits.

Q: What is the contact finish specification for these connectors?

A: Both connectors feature gold contact finish, which provides corrosion resistance and reliable electrical contact for backplane interconnections.

Q: Are there any moisture sensitivity concerns with these parts?

A: Both connectors have a Moisture Sensitivity Level (MSL) of 1, which indicates unlimited shelf life without moisture control requirements. Standard storage conditions are acceptable.

Q: What is the pitch spacing for these 120-position connectors?

A: Both connectors use a 0.100" (2.54mm) pitch spacing arranged in a 3-row configuration, which is standard for Eurocard series DIN connectors.