TE Connectivity AMP Connectors 650896-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 650896-5 is a 96 Position DIN Receptacle connector with female sockets, gold plating, and right-angle through-hole mounting. This connector belongs to the Eurocard series and is classified as obsolete. Due to its obsolete product status, equivalent and substitute parts from active manufacturers are necessary to maintain design continuity and ensure ongoing component availability for new production and field replacements.

Key Parameters

Parameter	Value
Manufacturer Part Number	650896-5
Manufacturer	TE Connectivity AMP Connectors
Category	Backplane Connectors
Connector Type	Receptacle, Female Sockets
Number of Positions	96
Pitch	0.100" (2.54mm)
Number of Rows	3
Mounting Type	Through Hole, Right Angle
Termination	Solder
Contact Finish	Gold
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 650896-5 is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

Connector Type: Receptacle, Female Sockets
Number of Positions: 96
Pitch: 0.100" (2.54mm)
Number of Rows: 3
Mounting Type: Through Hole, Right Angle
Termination: Solder
Contact Finish: Gold
Operating Temperature Range: -55°C ~ 125°C
Material Flammability Rating: UL94 V-0
Moisture Sensitivity Level: 1 (Unlimited)

Secondary Compatibility Factors:

Style designation (R, HE11, or equivalent)
Level/Class rating (2 or higher)
Insulation material (Polyester or Polybutylene Terephthalate, Glass Filled)
RoHS and REACH compliance status

All substitute parts listed below meet the primary substitution criteria. Variations in secondary factors are noted in the parameter comparison table to enable informed selection based on specific application requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Series	Positions	Pitch	Rows	Style	Level/Class	Contact Finish	Operating Temp	Current Rating	Flammability	Insulation Material	RoHS Status	Product Status
650896-5	TE Connectivity AMP Connectors	Eurocard	96	0.100" (2.54mm)	3	R	2	Gold	-55°C ~ 125°C	—	UL94 V-0	Polyester, Glass Filled	Not applicable	Obsolete
09792966801	HARTING	DIN 41612	96	0.100" (2.54mm)	3	R	2	Gold	-55°C ~ 125°C	2A	UL94 V-0	Polybutylene Terephthalate (PBT), Glass Filled	ROHS3 Compliant	Active
09734967801	HARTING	DIN 41612	96	0.100" (2.54mm)	3	R	3	—	-55°C ~ 125°C	2A	UL94 V-0	Polybutylene Terephthalate (PBT), Glass Filled	ROHS3 Compliant	Active
09734966801	HARTING	DIN 41612	96	0.100" (2.54mm)	3	R	2	—	—	—	—	—	ROHS3 Compliant	Active
86093968813H45V1LF	Amphenol ICC (FCI)	8609	96	0.100" (2.54mm)	3	R	3	Gold	-55°C ~ 125°C	1.5A	UL94 V-0	Polyester Thermoplastic	RoHS Compliant	Active
86093968813H65V1LF	Amphenol ICC (FCI)	8609	96	0.100" (2.54mm)	3	R	1	Gold	-55°C ~ 125°C	1.5A	UL94 V-0	Polyester Thermoplastic	RoHS Compliant	Active
86093968913755V1LF	Amphenol ICC (FCI)	8609	96	0.100" (2.54mm)	3	HE11	2	Gold, GXT™	-55°C ~ 125°C	1.5A	UL94 V-0	Polyester Thermoplastic	RoHS Compliant	Active
86093968913H55V1LF	Amphenol ICC (FCI)	8609	96	0.100" (2.54mm)	3	HE11	2	Gold	-55°C ~ 125°C	1.5A	UL94 V-0	Polyester Thermoplastic	RoHS Compliant	Active
RE96FSR	Vector Electronics	RE96	96	0.100" (2.54mm)	3	1	2	Gold	-55°C ~ 125°C	1A	—	Polycarbonate, Glass Filled	ROHS3 Compliant	Active

Engineering Selection Recommendations

Primary Recommendation: HARTING 09792966801

The HARTING 09792966801 provides the closest functional equivalence to the TE Connectivity 650896-5. This part maintains identical electrical and mechanical specifications including 96 positions, 0.100" pitch, 3-row configuration, right-angle through-hole mounting, and gold contact finish. The operating temperature range (-55°C ~ 125°C) and UL94 V-0 flammability rating match the original specification. The part is active in production and carries ROHS3 compliance, ensuring long-term availability and regulatory alignment.

Secondary Recommendation: Amphenol ICC (FCI) 86093968913H55V1LF

The Amphenol ICC 86093968913H55V1LF serves as an alternative for applications requiring enhanced contact durability. This part maintains the same 96-position, 3-row, right-angle configuration with gold plating and identical operating temperature range. The HE11 style designation and board lock feature provide mechanical robustness. RoHS compliance ensures regulatory compliance for new designs. The 1.5A current rating supports higher-current applications compared to the original specification.

Alternative Option: HARTING 09734967801

The HARTING 09734967801 is suitable for applications where Level/Class 3 rating is acceptable. This part meets all primary substitution criteria with the exception of contact finish specification, which is not provided in the datasheet. The part carries ROHS3 compliance and is active in production. The 2A current rating provides margin for higher-current designs.

Compliance Considerations:

All recommended substitute parts carry active product status, ensuring ongoing availability and manufacturer support. HARTING and Amphenol ICC parts are ROHS3 compliant, meeting current regulatory requirements for new production. The Vector Electronics RE96FSR is ROHS3 compliant but lacks specified flammability rating; this part is suitable only for applications where flammability certification is not required.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09792966801 be used as a direct replacement for the TE Connectivity 650896-5?

A: Yes. The HARTING 09792966801 meets all primary substitution criteria: 96 positions, 0.100" pitch, 3-row configuration, right-angle through-hole mounting, solder termination, gold contact finish, -55°C ~ 125°C operating temperature, and UL94 V-0 flammability rating. The part is active in production and ROHS3 compliant.

Q: What is the difference between the Amphenol ICC 86093968913H55V1LF and 86093968913755V1LF?

A: Both parts share identical electrical and mechanical specifications. The primary difference is the contact finish: 86093968913H55V1LF uses standard gold plating, while 86093968913755V1LF uses gold with GXT™ technology. Both are Level/Class 2, carry 1.5A current rating, and operate across -55°C ~ 125°C. Selection depends on application requirements for contact durability and corrosion resistance.

Q: Why do some substitute parts have different Level/Class ratings?

A: Level/Class rating indicates the connector's mechanical and electrical performance classification within the DIN 41612 standard. The original TE Connectivity 650896-5 is Level/Class 2. Substitute parts with Level/Class 3 (such as HARTING 09734967801 and Amphenol ICC 86093968813H45V1LF) provide enhanced performance and are backward compatible with Level/Class 2 applications. Level/Class 1 parts (such as Amphenol ICC 86093968813H65V1LF) have reduced performance specifications and are not recommended as direct replacements.

Q: Are all substitute parts RoHS compliant?

A: HARTING parts (09792966801, 09734967801, 09734966801) are ROHS3 compliant. Amphenol ICC parts (86093968813H45V1LF, 86093968813H65V1LF, 86093968913755V1LF, 86093968913H55V1LF) are RoHS compliant. Vector Electronics RE96FSR is ROHS3 compliant. All parts meet current regulatory requirements for new production.

Q: What is the significance of the GXT™ contact finish on the Amphenol ICC 86093968913755V1LF?

A: GXT™ is a proprietary gold plating technology that provides enhanced corrosion resistance and contact durability compared to standard gold plating. This finish is suitable for applications requiring extended service life or operation in corrosive environments. The part maintains all other specifications identical to the standard gold-plated variant.

Q: Can the Vector Electronics RE96FSR be used in applications requiring UL94 V-0 certification?

A: No. The Vector Electronics RE96FSR does not have a specified flammability rating in the provided data. This part is suitable only for applications where flammability certification is not a requirement. For applications requiring UL94 V-0 compliance, use HARTING or Amphenol ICC alternatives.

Q: What is the difference in current rating between the original part and substitute options?

A: The TE Connectivity 650896-5 does not specify a current rating. HARTING 09792966801 and 09734967801 are rated for 2A. Amphenol ICC parts are rated for 1.5A. Vector Electronics RE96FSR is rated for 1A. Selection of a substitute with specified current rating provides margin for higher-current applications and enables thermal analysis for design validation.

Q: Are there packaging differences between substitute parts?

A: Yes. HARTING parts are supplied in bulk packaging. Amphenol ICC parts are supplied in tray packaging. Vector Electronics RE96FSR is supplied in bulk packaging. Packaging selection affects handling, storage, and integration into production workflows. Confirm packaging requirements with procurement specifications before finalizing part selection.

Q: What insulation materials are used in the substitute parts?

A: HARTING 09792966801 and 09734967801 use Polybutylene Terephthalate (PBT), Glass Filled. Amphenol ICC parts use Polyester Thermoplastic. Vector Electronics RE96FSR uses Polycarbonate, Glass Filled. All materials meet UL94 V-0 flammability requirements where specified. Material selection affects temperature performance, mechanical strength, and chemical resistance. Confirm material compatibility with application environment.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message