TE Connectivity AMP Connectors 641215-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 641215-5 is a rectangular connector header designed for through-hole mounting applications. This shrouded, single-row connector accommodates 5 positions at 0.100" (2.54mm) pitch and is classified as an active product. The connector facilitates board-to-cable/wire connections using friction lock fastening and solder termination. Substitute parts are identified to address inventory availability, supply chain continuity, and application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

641215-5

TE Connectivity AMP ConnectorsIn Stock: 1177641215-5 Datasheet

Current PartRFQ

3-641215-5

TE Connectivity AMP ConnectorsIn Stock: 57803-641215-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 641215-5 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Voltage Rating: 250VAC
• Operating Temperature Range: -55°C ~ 105°C
• Contact Type: Male Pin
• Contact Material: Copper Alloy

Mechanical Compatibility Parameters:

• Number of Positions: 5
• Pitch - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination Method: Solder
• Shrouding: Shrouded - 1 Wall
• Fastening Type: Friction Lock

Regulatory & Compliance Parameters:

• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant or RoHS Compliant
• REACH Status: REACH Unaffected

The substitute part 3-641215-5 maintains full equivalence across all critical parameters, confirming direct interchangeability for the 641215-5 in applications requiring rectangular connectors within the MTA-100 series.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 3-641215-5 is a direct equivalent to the 641215-5 and is suitable for component selection in applications requiring rectangular connectors within the MTA-100 series. Both parts maintain active product status and comply with applicable regulatory standards including UL94 V-0 flammability rating and RoHS compliance. The substitute part demonstrates higher inventory availability (5702 pieces versus 1094 pieces), supporting supply chain continuity. Selection between the two parts is based on inventory availability and procurement lead time requirements, as electrical and mechanical specifications are identical.

Frequently Asked Questions (FAQ)

Q: Can the 3-641215-5 be used as a direct replacement for the 641215-5?

A: Yes. The 3-641215-5 is a direct equivalent substitute. Both parts share identical electrical specifications (250VAC voltage rating, -55°C ~ 105°C operating temperature), mechanical dimensions (5 positions, 0.100" pitch, through-hole mounting), contact configurations (male pin, gold-plated mating surface, tin-plated post), and regulatory compliance (UL94 V-0, RoHS compliant). No design modifications are required for substitution.

Q: Are there differences in RoHS compliance between the two parts?

A: Both parts are RoHS compliant. The 641215-5 carries ROHS3 Compliant designation, while the 3-641215-5 carries RoHS Compliant designation. Both statuses indicate compliance with Restriction of Hazardous Substances regulations and are equivalent for component selection purposes.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by equivalence in the following parameters: connector type (header), contact type (male pin), number of positions (5), mating pitch (0.100"), mounting method (through-hole), termination type (solder), shrouding configuration (shrouded - 1 wall), fastening mechanism (friction lock), voltage rating (250VAC), operating temperature range (-55°C ~ 105°C), contact materials and finishes, and regulatory compliance (UL94 V-0, RoHS, REACH).

Q: Does the substitute part have the same contact finish specifications?

A: Yes. Both parts feature identical contact finishes: gold-plated mating surface at 30.0µin (0.76µm) thickness and tin-plated post at 150.0µin (3.81µm) thickness. Contact material composition (copper alloy) and contact shape (square) are also identical.

Q: What is the difference in inventory availability?

A: The 641215-5 has 1094 pieces in stock, while the 3-641215-5 has 5702 pieces in stock. The substitute part offers significantly higher inventory availability for immediate procurement.

Q: Are the physical dimensions identical between the two parts?

A: Yes. Both parts have identical physical dimensions: contact length - mating of 0.295" (7.49mm), contact length - post of 0.140" (3.56mm), overall contact length of 0.535" (13.59mm), and insulation height of 0.305" (7.75mm).

Q: Can these connectors be used in high-temperature applications?

A: Both parts are rated for operating temperatures from -55°C to 105°C. Applications requiring operation outside this temperature range require alternative connector designs.

Q: What is the current rating for these connectors?

A: The current rating varies by wire gauge. Specific current capacity is determined by the gauge of the wire used in the mating cable or wire assembly.