TE Connectivity AMP Connectors 641208-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 641208-6 is a rectangular connector header designed for through-hole mounting applications. This connector is a vertical 6-position header with 0.156" (3.96mm) pitch spacing, classified within the MTA-156 series. The component features shrouded design with friction lock fastening and is suitable for general purpose and industrial applications requiring board-to-cable or board-to-board interconnection.

The part maintains active product status with 786 pieces in current inventory. Substitute parts are identified to address application requirements, inventory availability, or specific compliance certifications that may be necessary for particular end-use applications.

Substiute Parts

641208-6

TE Connectivity AMP ConnectorsIn Stock: 817641208-6 Datasheet

Current PartRFQ

3-641208-6

TE Connectivity AMP ConnectorsIn Stock: 19663-641208-6 Datasheet

DirectRFQ

0026482065

MolexIn Stock: 16290026482065 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 641208-6 are identified based on electrical and mechanical compatibility within the rectangular connector category. The substitution logic is based on the following critical parameters:

Primary Compatibility Criteria:

• Connector type classification (Header)
• Contact type (Male Pin)
• Number of positions (6)
• Pitch spacing (0.156" / 3.96mm)
• Mounting method (Through Hole)
• Termination type (Solder)
• Shrouding configuration (Shrouded - 1 Wall)
• Fastening mechanism (Friction Lock)
• Operating temperature range (-55°C ~ 105°C)
• Voltage rating (600VAC)
• Flammability rating (UL94 V-0)

Parts meeting these criteria are classified as direct or similar substitutes. Direct substitutes maintain identical electrical and mechanical specifications. Similar substitutes share core functional parameters but may exhibit variations in contact dimensions, material composition, or finish specifications that do not prevent functional interchangeability in the specified application category.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 3-641208-6 (Direct Substitute)

The 3-641208-6 is a direct substitute for the 641208-6, maintaining identical electrical and mechanical specifications across all critical parameters. Both parts are manufactured by TE Connectivity within the MTA-156 series and share the same connector architecture, contact configuration, and performance ratings. The 3-641208-6 carries ROHS3 compliance certification, whereas the main part lists RoHS status as not applicable. This distinction is relevant for applications subject to RoHS regulatory requirements. The 3-641208-6 maintains higher inventory availability at 1926 pieces compared to 786 pieces for the main part.

Molex 0026482065 (Similar Substitute)

The Molex 0026482065 functions as a similar substitute within the rectangular connector category. This part shares the core functional parameters: 6-position header configuration, 0.156" (3.96mm) pitch spacing, through-hole mounting, solder termination, shrouded design, and friction lock fastening. Both parts maintain UL94 V-0 flammability rating and unlimited moisture sensitivity classification.

Differences exist in contact material composition (Brass versus Copper Alloy), insulation material (Polyester versus Thermoplastic Glass Filled), and contact dimensions. The Molex part features slightly longer contact lengths (0.450" mating versus 0.400", and 0.172" post versus 0.125") and greater overall contact length (0.750" versus 0.650"). The Molex part includes breakaway connector capability and is classified for automotive, medical, and telecommunications applications in addition to general purpose and industrial use.

The Molex 0026482065 carries ROHS3 compliance and REACH Unaffected status. Operating temperature and voltage ratings are not specified for this part. Selection of the Molex substitute is appropriate when inventory constraints exist for TE Connectivity parts or when the breakaway feature provides functional advantage.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 3-641208-6 be used as a direct replacement for the 641208-6?

A: Yes. The 3-641208-6 is a direct substitute with identical electrical and mechanical specifications. Both parts maintain the same connector type, contact configuration, pitch spacing, mounting method, and performance ratings. The primary distinction is RoHS compliance status, with the 3-641208-6 carrying ROHS3 certification.

Q: What are the key differences between the TE Connectivity 641208-6 and the Molex 0026482065?

A: Both parts share identical core specifications: 6-position header, 0.156" pitch, through-hole solder termination, shrouded friction lock design, and UL94 V-0 flammability rating. Differences include contact material (Copper Alloy versus Brass), insulation material (Thermoplastic Glass Filled versus Polyester), contact dimensions, and application classification. The Molex part includes breakaway capability and broader application scope.

Q: Are there mechanical compatibility issues when substituting the Molex 0026482065 for the TE Connectivity 641208-6?

A: The Molex 0026482065 features longer contact lengths and greater overall contact length compared to the TE Connectivity part. These dimensional differences do not prevent functional interchangeability in standard board-to-cable or board-to-board applications. However, applications with specific spatial constraints or mating depth requirements should verify compatibility with the increased contact dimensions.

Q: Which substitute part should be selected for RoHS-compliant applications?

A: Both substitute parts carry ROHS3 compliance certification. The TE Connectivity 3-641208-6 explicitly lists ROHS3 Compliant status, and the Molex 0026482065 also carries ROHS3 certification. Either part is suitable for applications requiring RoHS compliance.

Q: What is the significance of the breakaway feature on the Molex 0026482065?

A: The breakaway feature allows individual connector positions to be separated from the main header assembly. This capability provides design flexibility for applications requiring modular connector configurations. The TE Connectivity parts do not include this feature.

Q: Are operating temperature and voltage ratings identical across all three parts?

A: The TE Connectivity 641208-6 and 3-641208-6 both specify -55°C to 105°C operating temperature range and 600VAC voltage rating. The Molex 0026482065 does not provide specified operating temperature or voltage ratings in the available documentation. Applications requiring confirmed temperature or voltage performance should reference the Molex technical documentation or contact the manufacturer directly.

Q: What inventory considerations apply to these substitute parts?

A: The TE Connectivity 641208-6 has 786 pieces in stock. The TE Connectivity 3-641208-6 has higher availability at 1926 pieces. The Molex 0026482065 has 1610 pieces available. Inventory selection should be based on application timeline and supply chain requirements.