Equivalent & Substitute Parts for Laird Technologies EMI 64006116

Part Overview

The Laird Technologies EMI 64006116 (SVR.060 X12 X12) is an electromagnetic interference management component with a Moisture Sensitivity Level of 1 (Unlimited). This part is classified as Obsolete, necessitating identification of functionally equivalent alternatives from the active product portfolio. The component is subject to ECCN EAR99 export classification and HTSUS code 8529.90.9800.

Substiute Parts

64006116

Laird Technologies EMIIn Stock: 83764006116 Datasheet

Current PartRFQ

8860-0062-100-90

Laird Technologies EMIIn Stock: 8908860-0062-100-90 Datasheet

SimilarRFQ

8860-0062-300-90

Laird Technologies EMIIn Stock: 11558860-0062-300-90 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the obsolete 64006116 is based on the following criteria derived from available product data:

Primary Substitution Parameters:

• Manufacturer alignment (Laird Technologies EMI)
• Product category (RF EMI management components)
• Moisture Sensitivity Level compatibility (MSL 1 or Not Applicable)
• Export classification (ECCN EAR99)
• Active product status (ensuring ongoing availability)

The substitute parts identified are from the Electroseal™ EcE90 series, which represents the active product line for RF EMI absorbing and shielding applications. Both substitute parts maintain ECCN EAR99 classification and are RoHS Compliant, ensuring regulatory alignment with the original component.

Parameter Comparison

Engineering Selection Recommendations

For 8860-0062-100-90 (RF EMI Absorbing Sheet 10"X10"): This substitute is suitable for applications requiring absorbing sheet functionality with a 10.000" × 10.000" × 0.062" form factor. The component is Active status, ensuring supply chain continuity. RoHS Compliance and EAR99 classification align with regulatory requirements. Current inventory of 863 pieces supports immediate availability.

For 8860-0062-300-90 (RF EMI Shielding Sheet 20"X15"): This substitute addresses shielding sheet applications with a 20.000" × 15.000" × 0.062" form factor. Active product status guarantees long-term availability. RoHS Compliance and EAR99 classification maintain regulatory alignment. Current inventory of 1090 pieces supports procurement requirements.

Selection between these substitutes depends on the specific application requirement: absorbing sheet versus shielding sheet functionality, and the dimensional requirements of the end application.

Frequently Asked Questions (FAQ)

Q: Why is the 64006116 being discontinued? A: The 64006116 is classified as Obsolete. Laird Technologies EMI has transitioned to the Electroseal™ EcE90 series for RF EMI management applications, which offers improved compliance certifications and active product support.

Q: What is the thickness difference between the original and substitute parts? A: The original 64006116 has a thickness of 0.060" (1.52mm), while both substitute parts have a thickness of 0.062" (1.57mm). This 0.002" difference represents a 3.3% increase and should be evaluated against application mechanical constraints.

Q: Are the substitute parts RoHS Compliant? A: Yes, both substitute parts (8860-0062-100-90 and 8860-0062-300-90) are RoHS Compliant. The original 64006116 RoHS status is not specified in available documentation.

Q: Can I use either substitute part interchangeably? A: No. The 8860-0062-100-90 is an absorbing sheet (10"×10"), while the 8860-0062-300-90 is a shielding sheet (20"×15"). Selection depends on whether your application requires absorbing or shielding functionality, and the dimensional requirements of your assembly.

Q: What is the Moisture Sensitivity Level of the substitute parts? A: Both substitute parts have MSL classification of Not Applicable, indicating they do not require moisture-sensitive device handling procedures. The original 64006116 has MSL 1 (Unlimited), also indicating no moisture sensitivity restrictions.

Q: Are export restrictions the same for all parts? A: Yes. The original 64006116 and both substitute parts are classified as ECCN EAR99, indicating they are subject to the same export control regulations.