TE Connectivity 6364173-5 Modular Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 6364173-5 is a Jack Modular Connector with 8p8c (RJ45, Ethernet) configuration, featuring 90° right-angle orientation and shielded design with EMI finger protection. This connector is rated for Cat5 applications and is designed for through-hole solder termination on printed circuit boards.

The 6364173-5 carries an Obsolete product status. Identification of equivalent substitute parts is necessary to maintain design continuity and ensure procurement availability for applications requiring this connector specification.

Substiute Parts

6364173-5

TE Connectivity AMP ConnectorsIn Stock: 10836364173-5 Datasheet

Current PartRFQ

6116353-5

TE Connectivity AMP ConnectorsIn Stock: 20396116353-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 6364173-5 is based on electrical and mechanical parameter equivalence. The substitute part must satisfy the following criteria:

Electrical Parameters:

• Connector type: Jack
• Contact configuration: 8p8c (RJ45, Ethernet)
• Number of ports: 2
• Shielding specification: Shielded with EMI finger
• Performance rating: Cat5
• Contact material and finish: Phosphor Bronze with Gold plating (50.0µin)

Mechanical Parameters:

• Mounting type: Through Hole
• Orientation: 90° Angle (Right)
• Termination method: Solder
• Housing material: Thermoplastic
• Tab direction: Up
• Board guide feature: Present

Environmental & Compliance Parameters:

• Operating temperature: -40°C ~ 85°C
• RoHS3 compliance required
• Moisture sensitivity level: 1 (Unlimited)

The substitute part TE Connectivity 6364173-5 meets all specified criteria and is therefore electrically and mechanically equivalent.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 6116353-5 is the direct equivalent substitute for the obsolete 6364173-5 modular connector. All electrical, mechanical, and environmental specifications are identical between the two parts.

Primary Advantage: The 6116353-5 carries Active product status, ensuring long-term availability and continued manufacturer support. The 6364173-5 is classified as Obsolete and should not be selected for new designs or ongoing procurement.

Compliance Alignment: Both parts maintain ROHS3 compliance and identical export classification (EAR99). The substitute part carries REACH Unaffected status, providing additional regulatory clarity.

Packaging Consideration: The substitute part is supplied in Tray packaging, which is standard for production quantities of modular connectors and supports automated assembly processes.

Direct Substitution: No design modifications, PCB layout changes, or assembly procedure adjustments are required when transitioning from 6364173-5 to 6116353-5. The parts are pin-compatible and mechanically interchangeable.

Frequently Asked Questions (FAQ)

Q: Can the 6116353-5 be used as a direct replacement for the 6364173-5 in existing designs?

A: Yes. The 6116353-5 is electrically and mechanically equivalent to the 6364173-5. All contact configurations, mounting specifications, and performance ratings are identical. No PCB modifications or assembly procedure changes are required.

Q: What is the difference between the two part numbers?

A: The primary difference is product status. The 6364173-5 is Obsolete, while the 6116353-5 is Active. The 6116353-5 also specifies Tray packaging. All other electrical and mechanical parameters are identical.

Q: Why should I transition from 6364173-5 to 6116353-5?

A: The 6364173-5 is Obsolete and subject to discontinuation. The 6116353-5 is an Active product with guaranteed availability and manufacturer support. Transitioning to the active part ensures supply chain continuity and eliminates obsolescence risk.

Q: Are there any compatibility concerns when switching to the 6116353-5?

A: No compatibility concerns exist. Both parts are 8p8c (RJ45, Ethernet) Jack connectors with identical pinout, shielding, and solder termination specifications. They are fully interchangeable at the component level.

Q: What packaging format is the 6116353-5 supplied in?

A: The 6116353-5 is supplied in Tray packaging. This format is standard for modular connector production quantities and is compatible with automated pick-and-place assembly equipment.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both the 6364173-5 and 6116353-5 are ROHS3 compliant, carry EAR99 export classification, and share identical HTSUS coding (8536.69.4040). The 6116353-5 additionally specifies REACH Unaffected status.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across the temperature range of -40°C to 85°C, making them suitable for industrial and commercial networking applications.

Q: Are the contact materials and finishes identical?

A: Yes. Both parts use Phosphor Bronze contacts with Gold plating at 50.0µin (1.27µm) thickness, ensuring equivalent electrical performance and corrosion resistance.