Amphenol ICC 63453-010 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 63453-010 is a 10-position receptacle connector from the Minitek® 2.00mm series, designed for board-to-board applications in general purpose, industrial, and medical environments. This connector features a 0.079" (2.00mm) pitch with through-hole solder termination and push-pull fastening. The part is currently listed as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations.

Substiute Parts

63453-010

Amphenol ICC (FCI)In Stock: 74263453-010 Datasheet

Current PartRFQ

63453-010LF

Amphenol ICC (FCI)In Stock: 104463453-010LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 63453-010LF is identified as a direct substitute based on identical electrical and mechanical parameters. Substitution is valid when the following criteria are met:

• Connector type: Receptacle
• Number of positions: 10
• Pitch - mating: 0.079" (2.00mm)
• Number of rows: 2
• Row spacing - mating: 0.079" (2.00mm)
• Mounting type: Through hole
• Termination: Solder
• Fastening type: Push-pull
• Current rating: 2A
• Voltage rating: 200V
• Operating temperature range: -55°C ~ 125°C
• Contact finish - mating: Gold
• Material flammability rating: UL94 V-0
• Insulation material: Polycyclohexylenedimethylene Terephthalate (PCT), Glass Filled

The primary distinction between the main part and substitute is product status and regulatory compliance, not functional or mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

The 63453-010LF serves as the direct functional equivalent to the obsolete 63453-010. Both parts share identical electrical and mechanical specifications across all critical parameters including connector geometry, contact configuration, current and voltage ratings, and operating temperature range.

The 63453-010LF is the recommended selection for new designs and replacement applications due to its active product status and RoHS compliance. The obsolete 63453-010 should be replaced in existing designs where component refresh cycles permit.

For applications with existing inventory of the 63453-010, the 63453-010LF provides pin-for-pin and form-factor compatibility, enabling direct substitution without circuit redesign or PCB layout modification.

Frequently Asked Questions (FAQ)

Q: Are the 63453-010 and 63453-010LF mechanically interchangeable?

A: Yes. Both connectors share identical mating pitch (0.079"), row spacing (0.079"), number of positions (10), mounting type (through hole), and physical dimensions. They are form-factor compatible and can be substituted without PCB layout changes.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and regulatory compliance. The 63453-010 is obsolete and RoHS non-compliant, while the 63453-010LF is active and RoHS compliant. All electrical and mechanical parameters are identical.

Q: Can I use the 63453-010LF in applications originally designed for the 63453-010?

A: Yes. The 63453-010LF is a direct substitute with identical electrical ratings (2A, 200V), operating temperature range (-55°C ~ 125°C), contact finish (gold mating surface), and mechanical configuration. No design modifications are required.

Q: What is the packaging difference?

A: The 63453-010 packaging is not specified in available documentation. The 63453-010LF is supplied in tube packaging.

Q: Are there any compliance considerations when switching from 63453-010 to 63453-010LF?

A: The 63453-010LF is RoHS compliant and REACH affected, whereas the 63453-010 is RoHS non-compliant and REACH unaffected. For applications subject to RoHS or REACH regulations, the 63453-010LF is the appropriate selection.