TE Connectivity AMP Connectors 6345052-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 6345052-1 is a 55-position header connector with male pins, designed for backplane applications. This connector features a 2.00mm pitch, press-fit termination, and right-angle board edge mounting. The part is currently active in production with 1110 units in stock. Equivalent and substitute parts are identified to provide design flexibility, support supply chain continuity, and accommodate specific application requirements such as voltage rating variations or regional compliance needs.

Substiute Parts

6345052-1

TE Connectivity AMP ConnectorsIn Stock: 11886345052-1 Datasheet

Current PartRFQ

HM2J09PE5110N9LF

Amphenol ICC (FCI)In Stock: 936HM2J09PE5110N9LF Datasheet

SimilarRFQ

HM2J09PE51P0N9LF

Amphenol ICC (FCI)In Stock: 806HM2J09PE51P0N9LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 6345052-1 are identified based on strict electrical and mechanical parameter compatibility. The following criteria determine substitution eligibility:

Critical Matching Parameters:

• Number of Positions: 55
• Pitch: 0.079" (2.00mm)
• Number of Rows: 5
• Connector Type: Header, Male Pins
• Connector Style: C 11
• Mounting Type: Board Edge, Through Hole, Right Angle
• Termination: Press-Fit
• Contact Finish: Gold
• Contact Finish Thickness: 30.0µin (0.76µm)
• Current Rating: 1.5 A
• Operating Temperature Range: -55°C ~ 125°C
• RoHS Compliance: Yes
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Voltage Rating: Substitute parts rated at 750Vrms exceed the 500Vrms requirement and are acceptable for applications requiring the main part specification.

The substitute parts HM2J09PE51P0N9LF and HM2J09PE5110N9LF, manufactured by Amphenol ICC (FCI) under the Millipacs® series, meet all critical parameters and are electrically and mechanically compatible with the TE Connectivity 6345052-1.

Parameter Comparison

Engineering Selection Recommendations

Both Amphenol ICC (FCI) substitute parts—HM2J09PE51P0N9LF and HM2J09PE5110N9LF—are functionally equivalent to the TE Connectivity 6345052-1 for applications operating within the 500Vrms specification. The substitute parts carry higher voltage ratings (750Vrms), which provide additional design margin without compromising performance in standard applications.

Compliance Status:

• All three parts are RoHS Compliant
• All three parts carry Moisture Sensitivity Level 1 (Unlimited)
• TE Connectivity 6345052-1: REACH Status Vendor Undefined
• Amphenol ICC HM2J09PE51P0N9LF and HM2J09PE5110N9LF: REACH Affected

Product Availability:

• TE Connectivity 6345052-1: 1110 units in stock
• Amphenol ICC HM2J09PE51P0N9LF: 749 units in stock
• Amphenol ICC HM2J09PE5110N9LF: 840 units in stock

Selection between substitute parts should be based on supply chain requirements, REACH compliance obligations, and inventory availability. All parts are suitable for backplane connector applications requiring 55-position, 2.00mm pitch, press-fit termination headers with male pins.

Frequently Asked Questions (FAQ)

Q: Can HM2J09PE51P0N9LF and HM2J09PE5110N9LF be used interchangeably with TE Connectivity 6345052-1?

A: Yes. Both Amphenol ICC parts meet all critical electrical and mechanical parameters required for the TE Connectivity 6345052-1 application. The 750Vrms rating on the substitute parts exceeds the 500Vrms requirement and does not create incompatibility.

Q: What is the primary difference between the two Amphenol ICC substitute parts?

A: HM2J09PE51P0N9LF and HM2J09PE5110N9LF are both Millipacs® series connectors with identical electrical and mechanical specifications. Differences exist only in part number designation and inventory levels (749 units versus 840 units respectively).

Q: Are there any compliance considerations when substituting these parts?

A: The TE Connectivity 6345052-1 lists REACH Status as Vendor Undefined, while both Amphenol ICC substitute parts are marked as REACH Affected. Applications subject to REACH compliance requirements should confirm regulatory obligations before part selection. All three parts are RoHS Compliant.

Q: Does the higher voltage rating of the substitute parts affect circuit design?

A: No. The 750Vrms rating on HM2J09PE51P0N9LF and HM2J09PE5110N9LF is a superset of the 500Vrms requirement. Circuits designed for 500Vrms operation function identically with these substitute parts.

Q: Are the pitch and position count identical across all three parts?

A: Yes. All three parts feature 55 positions arranged in 5 rows with 0.079" (2.00mm) pitch. Mechanical and electrical compatibility is maintained across all substitutions.

Q: What is the moisture sensitivity level for these connectors?

A: All three parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly.

Q: Can these connectors be used in high-temperature applications?

A: Yes. All three parts are rated for operating temperatures from -55°C to 125°C, supporting applications across this full temperature range.