LED CBI 3MM BI-LVL GRN RA 6322F55

Part Overview

The 6322F55 is a LED Circuit Board Indicator manufactured by Visual Communications Company (VCC) in the 6322F series. This component is a dual-level (2 High) green LED with a 3mm T-1 through-hole right-angle mounting configuration, designed for circuit board indication applications. The part is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing procurement and design requirements. Active alternatives are available from both VCC and third-party manufacturers that maintain functional compatibility within specified electrical and mechanical parameters.

Substiute Parts

6322F55

Visual Communications Company - VCCIn Stock: 12566322F55 Datasheet

Current PartRFQ

5682F5_5

Visual Communications Company - VCCIn Stock: 22765682F5_5 Datasheet

DirectRFQ

5530122200F

DialightIn Stock: 73755530122200F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 6322F55 are classified based on electrical and mechanical parameter alignment within the LED Circuit Board Indicator category. Substitution eligibility is determined by the following critical parameters:

Primary Compatibility Criteria:

• Color: Green (x 2)
• Wavelength - Peak: 565nm
• Configuration: 2 High
• Lens Size: 3mm, T-1
• Mounting Type: Through Hole, Right Angle
• Lens Style: Round with Domed Top

Secondary Compatibility Parameters:

• Voltage Rating (allowable variance based on circuit design)
• Current Rating (allowable variance based on circuit design)
• Millicandela Rating (brightness level)
• Lens Type (Tinted vs. Diffused, Tinted)

The 5682F5_5 is classified as a direct manufacturer equivalent, maintaining identical electrical and optical specifications while offering active product status. The 5530122200F is classified as a similar manufacturer part from Dialight, with variations in lens type, current rating, voltage rating, and brightness that require circuit-level evaluation for compatibility.

Parameter Comparison

Engineering Selection Recommendations

5682F5_5 (VCC Direct Equivalent): The 5682F5_5 is the primary substitute for the obsolete 6322F55. This part maintains identical electrical specifications (10mA current, 2.3V voltage rating, 8.5mcd brightness) and mechanical configuration. Both components are ROHS3 compliant with MSL 1 rating and REACH unaffected status. The 5682F5_5 carries active product status, ensuring long-term availability and supply chain continuity. This part is suitable for direct replacement in existing designs without circuit modification.

5530122200F (Dialight Alternative): The 5530122200F is an alternative from Dialight that maintains the same form factor, mounting type, and wavelength specification. This part differs in three electrical parameters: current rating (20mA vs. 10mA), voltage rating (2.1V vs. 2.3V), and brightness (12.6mcd vs. 8.5mcd). The lens type is diffused and tinted rather than tinted only. This part is suitable for applications where the higher brightness and diffused lens characteristics are compatible with circuit design requirements. The 5530122200F also carries active product status and full compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can the 5682F5_5 be used as a direct replacement for the 6322F55?

A: Yes. The 5682F5_5 maintains identical electrical and mechanical specifications to the 6322F55, including current (10mA), voltage (2.3V), brightness (8.5mcd), lens type (tinted), and mounting configuration (through hole, right angle). No circuit modification is required.

Q: What are the key differences between the 5530122200F and the 6322F55?

A: The 5530122200F differs in three parameters: current rating (20mA vs. 10mA), voltage rating (2.1V vs. 2.3V), and brightness (12.6mcd vs. 8.5mcd). Additionally, the lens type is diffused and tinted rather than tinted only. These differences may affect circuit performance and must be evaluated against design requirements.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. Both the 5682F5_5 and 5530122200F are ROHS3 compliant with MSL 1 rating and REACH unaffected status, matching the compliance profile of the 6322F55.

Q: What is the difference between tinted and diffused, tinted lens types?

A: Tinted lenses provide color filtering with clear light transmission. Diffused, tinted lenses combine color filtering with light scattering, which affects brightness distribution and viewing angle. The 5530122200F includes a 60° viewing angle specification due to its diffused lens type.

Q: Why is the 6322F55 marked as obsolete?

A: The 6322F55 is classified as obsolete by the manufacturer. The 5682F5_5 from VCC is the active equivalent and is recommended for new designs and ongoing procurement.

Q: Can the 5530122200F be used in applications requiring 10mA current?

A: The 5530122200F is rated for 20mA operation. Circuit design must accommodate this higher current rating. Using this part in a circuit designed for 10mA requires evaluation of current-limiting resistor values and overall circuit performance.

Q: What packaging options are available for substitute parts?

A: Both the 5682F5_5 and 5530122200F are supplied in bulk packaging.