LED Circuit Board Indicator 6322F11 Equivalent & Substitute Parts

Part Overview

The VCC 6322F11 is a dual-level red LED circuit board indicator designed for through-hole, right-angle mounting applications. This component features a 3mm T-1 form factor with a tinted, domed lens and operates at 2.2V with 10mA current consumption. The 6322F11 is classified as obsolete, necessitating identification of active equivalent parts for ongoing design requirements and procurement continuity.

Substiute Parts

6322F11

Visual Communications Company - VCCIn Stock: 9286322F11 Datasheet

Current PartRFQ

5682F1_1

Visual Communications Company - VCCIn Stock: 36595682F1_1 Datasheet

DirectRFQ

5530111200F

DialightIn Stock: 13715530111200F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 6322F11 are identified based on strict electrical and mechanical parameter alignment within the LED circuit board indicator category. The substitution logic is organized into two categories:

Direct Equivalent (Preferred): Parts that maintain identical or functionally equivalent specifications across all critical parameters including color, wavelength, configuration, lens type, lens size, mounting type, and form factor.

Similar Equivalent (Alternative): Parts that share the same fundamental form factor, mounting type, and optical characteristics but may differ in specific electrical parameters such as voltage rating or current consumption within acceptable operational ranges.

The following parameters determine substitution eligibility:

• Color and wavelength (635nm red)
• Configuration (2 High dual-level)
• Lens type and style (Tinted, Round with Domed Top)
• Lens size (3mm, T-1)
• Mounting type (Through Hole, Right Angle)
• RoHS and REACH compliance status

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: VCC 5682F1_1

The 5682F1_1 is the preferred direct equivalent for the obsolete 6322F11. This part maintains identical electrical specifications (2.2V, 10mA) and optical characteristics (635nm wavelength, 10mcd brightness, tinted lens). Both components are manufactured by VCC and share the same series lineage. The 5682F1_1 holds active product status with 3562 units in stock, ensuring procurement availability. Compliance certifications (ROHS3, REACH Unaffected) are equivalent to the original part.

Secondary Substitute: Dialight 5530111200F

The 5530111200F serves as an alternative equivalent when the primary substitute is unavailable. This part shares identical form factor, mounting configuration, and optical wavelength. Key differences include increased current rating (20mA versus 10mA) and slightly lower voltage rating (2V versus 2.2V). The lens type includes diffused characteristics in addition to tinting, affecting light distribution. The 5530111200F is manufactured by Dialight and maintains active product status with 1295 units in stock. Compliance certifications match the original specification.

Selection between these substitutes depends on circuit design requirements regarding current consumption and voltage tolerance. Both parts satisfy the mechanical and environmental compliance requirements of the original component.

Frequently Asked Questions (FAQ)

Q: Can the 5682F1_1 be used as a direct replacement for the 6322F11 without circuit modification?

A: Yes. The 5682F1_1 maintains identical voltage (2.2V) and current (10mA) specifications, identical wavelength (635nm), and identical mechanical form factor. No circuit redesign is required for substitution.

Q: What are the key differences between the 5682F1_1 and 5530111200F?

A: The 5682F1_1 is a direct VCC equivalent with matching electrical specifications. The 5530111200F is a Dialight alternative with higher current rating (20mA) and lower voltage rating (2V). The 5530111200F also features a diffused lens in addition to tinting, which affects light distribution characteristics.

Q: Does the higher current rating of the 5530111200F (20mA) affect compatibility?

A: The higher current rating indicates maximum allowable current. The 5530111200F can operate at lower current levels if circuit design requires 10mA operation. However, circuit design must accommodate the 2V voltage rating rather than 2.2V.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. Both the 5682F1_1 and 5530111200F are ROHS3 compliant and REACH unaffected, matching the compliance status of the original 6322F11.

Q: What is the significance of the "2 High" configuration?

A: The "2 High" configuration indicates a dual-level LED indicator with two red LEDs stacked vertically within the single 3mm T-1 package. All substitute parts maintain this configuration.

Q: Does packaging format affect substitution eligibility?

A: The 6322F11 original packaging is not specified in available data. The 5682F1_1 is supplied in bulk packaging. The 5530111200F is also supplied in bulk packaging. Packaging format does not affect electrical or mechanical compatibility; procurement quantities and handling procedures may require adjustment based on bulk supply format.