62O102KBECN Equivalent & Substitute Parts

Part Overview

The 62O102KBECN is a 1000 pF ceramic capacitor rated for 400VAC with radial, disc mounting configuration, manufactured by KYOCERA AVX. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing production and maintenance applications. The part carries X1 and Y2 safety ratings for use in safety-critical applications.

Substiute Parts

62O102KBECN

KYOCERA AVXIn Stock: 78062O102KBECN Datasheet

Current PartRFQ

C927U102KYYDAAWL20

KEMETIn Stock: 1181C927U102KYYDAAWL20 Datasheet

MFR RecommendedRFQ

C927U102KYYDAAWL45

KEMETIn Stock: 916C927U102KYYDAAWL45 Datasheet

MFR RecommendedRFQ

C927U102KZYDAAWL20

KEMETIn Stock: 867C927U102KZYDAAWL20 Datasheet

MFR RecommendedRFQ

C927U102KZYDAAWL45

KEMETIn Stock: 757C927U102KZYDAAWL45 Datasheet

MFR RecommendedRFQ

VY2102M29Y5US63V7

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 44503VY2102M29Y5US63V7 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 62O102KBECN is determined by the following critical parameters: capacitance value (1000 pF), tolerance (±10%), voltage rating (400VAC minimum), safety ratings (X1, Y2), operating temperature range (-40°C ~ 125°C), and through-hole radial disc mounting with 0.295" lead spacing.

Substitute parts are grouped into two categories based on voltage rating:

Group 1: 400VAC Rated Substitutes — Direct voltage equivalents maintaining the original 400VAC specification. These parts are KEMET C927U series components with Y5P temperature coefficient.

Group 2: 440VAC Rated Substitutes — Higher voltage-rated alternatives suitable for applications where the original 400VAC specification can accommodate elevated voltage ratings. These include KEMET C927U series at 440VAC and Vishay Beyschlag VY2102 series at 440VAC.

All substitute parts maintain identical capacitance, tolerance, safety ratings, operating temperature range, and lead spacing specifications.

Parameter Comparison

Engineering Selection Recommendations

For direct replacement of the obsolete 62O102KBECN in applications requiring 400VAC operation, the KEMET C927U102KYYDAAWL20 and C927U102KYYDAAWL45 are primary substitutes. Both parts are active products with ROHS3 compliance and maintain identical electrical specifications and physical dimensions.

For applications where voltage margin is acceptable, the KEMET C927U102KZYDAAWL20 and C927U102KZYDAAWL45 (440VAC rated) provide higher voltage headroom while maintaining all other critical parameters.

The Vishay Beyschlag VY2102M29Y5US63V7 is suitable for 440VAC applications; however, its ±20% tolerance differs from the original ±10% specification and should be evaluated against circuit requirements.

All substitute parts carry X1 and Y2 safety ratings, supporting continued use in safety-critical applications. ROHS3 compliance of active substitutes aligns with current regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can C927U102KYYDAAWL20 and C927U102KYYDAAWL45 be used interchangeably with 62O102KBECN?

A: Yes. Both KEMET parts maintain identical capacitance (1000 pF), tolerance (±10%), voltage rating (400VAC), safety ratings (X1, Y2), operating temperature range, and lead spacing. The difference between KYYDAAWL20 and KYYDAAWL45 variants relates to packaging configuration, not electrical performance.

Q: What is the difference between 400VAC and 440VAC rated substitutes?

A: The 440VAC-rated parts (C927U102KZYDAAWL20, C927U102KZYDAAWL45, and VY2102M29Y5US63V7) provide higher voltage margin. Selection depends on the actual operating voltage in the application. If the circuit operates at 400VAC, either 400VAC or 440VAC rated parts are acceptable.

Q: Why does VY2102M29Y5US63V7 have ±20% tolerance instead of ±10%?

A: The Vishay Beyschlag part uses Y5U temperature coefficient classification, which carries ±20% tolerance per industry standards. The original 62O102KBECN and KEMET C927U substitutes use different temperature coefficient classifications (unspecified and Y5P respectively) with ±10% tolerance. Tolerance selection should align with circuit design requirements.

Q: Are all substitute parts through-hole radial disc components?

A: Yes. All substitute parts maintain through-hole radial disc mounting with 0.295" (7.50mm) lead spacing, ensuring mechanical compatibility with the original 62O102KBECN footprint.

Q: Do substitute parts meet current compliance standards?

A: All active substitute parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic components.