Grayhill 62C1515-02-P Rotary Encoder Optical 24PPR Equivalent & Substitute Parts

Part Overview

The Grayhill 62C1515-02-P is an optical rotary encoder with 24 pulses per revolution (PPR), providing quadrature incremental output. This component is classified as Active product status with full RoHS3 compliance and REACH unaffected designation. The encoder features a concentric actuator with integrated detent and built-in switch functionality, designed for panel and PCB through-hole mounting in vertical orientation.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the primary application requirements, allowing for component interchangeability within specified parameter tolerances.

Substiute Parts

62C1515-02-P

Grayhill Inc.In Stock: 104362C1515-02-P Datasheet

Current PartRFQ

62C2222-02-P

Grayhill Inc.In Stock: 96762C2222-02-P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 62C1515-02-P is determined by alignment of the following critical parameters:

Fixed Parameters (Must Match):

• Manufacturer: Grayhill Inc.
• Series: 62C
• Encoder Type: Optical
• Output Type: Quadrature (Incremental)
• Supply Voltage: 5V
• Actuator Type: Concentric
• Detent: Yes
• Built-in Switch: Yes
• Mounting Type: Panel, PCB Through Hole
• Orientation: Vertical
• Termination Style: PC Pin
• Rotational Life: 1M cycles minimum
• RoHS Status: ROHS3 Compliant
• MSL: 1 (Unlimited)
• REACH Status: REACH Unaffected

Variable Parameter (Allows Substitution):

• Pulses per Revolution (PPR): May differ based on application resolution requirements

The 62C2222-02-P is identified as a substitute part within the 62C series, maintaining all fixed parameters while offering an alternative PPR specification.

Parameter Comparison

Engineering Selection Recommendations

Both the 62C1515-02-P and 62C2222-02-P maintain Active product status with identical compliance certifications: ROHS3 Compliant, REACH Unaffected, and MSL 1 (Unlimited). Both components are manufactured by Grayhill Inc. within the 62C series and share identical mechanical, electrical, and environmental specifications.

The primary distinction between these parts is the pulses per revolution specification: 24 PPR for the 62C1515-02-P versus 16 PPR for the 62C2222-02-P. This parameter directly affects encoder resolution and output frequency characteristics. Selection between these parts depends solely on the application's resolution requirements and the system's ability to process the corresponding output frequency.

Both parts are suitable for applications requiring optical quadrature incremental output with 5V supply, concentric actuator configuration, integrated detent and switch functionality, and vertical panel or PCB through-hole mounting.

Frequently Asked Questions (FAQ)

Q: What is the primary difference between the 62C1515-02-P and 62C2222-02-P?

A: The primary difference is the pulses per revolution specification. The 62C1515-02-P provides 24 PPR, while the 62C2222-02-P provides 16 PPR. All other electrical, mechanical, and environmental parameters are identical.

Q: Are these parts mechanically interchangeable?

A: Yes. Both parts share identical mounting type (Panel, PCB Through Hole), orientation (Vertical), termination style (PC Pin), and physical actuator configuration (Concentric with detent and built-in switch).

Q: Do both parts meet the same compliance standards?

A: Yes. Both the 62C1515-02-P and 62C2222-02-P are ROHS3 Compliant, REACH Unaffected, with MSL 1 (Unlimited) rating.

Q: What supply voltage do these encoders require?

A: Both parts operate at 5V supply voltage.

Q: Can I use the 62C2222-02-P as a direct replacement for the 62C1515-02-P?

A: Mechanical and electrical compatibility is confirmed. However, the 16 PPR output of the 62C2222-02-P differs from the 24 PPR of the 62C1515-02-P. Substitution is valid only if the application can accommodate the lower resolution output.

Q: What is the rotational life specification for both parts?

A: Both encoders are rated for a minimum of 1 million (1M) rotational cycles.

Q: Are both parts available in the same packaging?

A: The 62C1515-02-P is available in standard packaging, while the 62C2222-02-P is available in Bulk packaging. Both maintain identical component specifications.