628-015-220-047 D-Sub Receptacle 15 Position Equivalent & Substitute Parts

Part Overview

The 628-015-220-047 is a 15 Position D-Sub Receptacle connector manufactured by Mercury United Electronics, Inc. This through-hole solder-terminated connector features female sockets in a 2-row configuration with board-side flange mounting. The connector is actively produced and maintained in inventory, serving applications requiring reliable signal and power distribution in D-Sub form factor. Equivalent and substitute parts are identified when design flexibility, supply chain optimization, or specific application requirements necessitate alternative sourcing options while maintaining electrical and mechanical compatibility.

Substiute Parts

628-015-220-047

Mercury United Electronics, Inc.In Stock: 860628-015-220-047 Datasheet

Current PartRFQ

2-338314-2

TE Connectivity AMP ConnectorsIn Stock: 18372-338314-2 Datasheet

SimilarRFQ

7-1393740-1

TE Connectivity AMP ConnectorsIn Stock: 15037-1393740-1 Datasheet

SimilarRFQ

M24308/23-8F

TE Connectivity Aerospace, Defense and MarineIn Stock: 1399M24308/23-8F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 628-015-220-047 is determined by the following mandatory parameters:

• Connector Configuration: 15 Position D-Sub Receptacle, Female Sockets, 2-row layout (DA, A shell size)
• Mounting Method: Through Hole solder termination
• Contact Interface: Gold-plated finish for signal integrity
• Mechanical Compatibility: Board-side or housing-side flange mounting with equivalent footprint

The three identified substitute parts meet these core requirements. Variations in shell material finish, contact material composition, current rating, and operating temperature range are permissible within the D-Sub receptacle category, provided the connector maintains the specified 15-position, 2-row configuration and solder termination method. Compliance certifications and RoHS status may differ based on application requirements and regulatory jurisdiction.

Parameter Comparison

Engineering Selection Recommendations

628-015-220-047 (Mercury United Electronics, Inc.) Primary specification. ROHS3 compliant. Suitable for commercial and industrial applications requiring RoHS3 certification. Operating temperature range -55°C to 85°C. Current rating 3A per contact. Nickel-plated steel shell with flash gold contact finish.

2-338314-2 (TE Connectivity AMP Connectors, AMPLIMITE HDP-20 Series) RoHS compliant alternative with extended operating temperature range (-55°C to 105°C) and higher current rating (6A per contact). Tin-plated steel shell with phosphor bronze contacts. Suitable for applications requiring higher thermal performance or increased current capacity. Housing/shell flange mounting (M3).

7-1393740-1 (TE Connectivity AMP Connectors, AMPLIMITE HD-20 Series) RoHS compliant option. Limited technical specification data provided. Suitable for applications where TE Connectivity AMPLIMITE HD-20 series compatibility is required. MSL rating 1 (Unlimited). REACH Affected status.

M24308/23-8F (TE Connectivity Aerospace, Defense and Marine, MIL-DTL-24308) Military-specification connector. RoHS non-compliant. Extended operating temperature range (-55°C to 125°C) and 5A current rating. Cadmium-plated steel shell with specified gold contact thickness (10.0µin / 0.25µm). Suitable for aerospace, defense, and marine applications requiring MIL-DTL-24308 compliance. REACH Affected status. Not applicable for MSL rating.

Frequently Asked Questions (FAQ)

Q: Can 2-338314-2 be used as a direct replacement for 628-015-220-047? A: Yes, within electrical and mechanical compatibility parameters. Both connectors share identical 15-position, 2-row D-Sub configuration, through-hole solder termination, and gold-plated contacts. The 2-338314-2 offers extended operating temperature range (-55°C to 105°C versus -55°C to 85°C) and higher current rating (6A versus 3A per contact). Flange mounting differs: 628-015-220-047 uses board-side 4-40 flange; 2-338314-2 uses housing/shell M3 flange. PCB layout compatibility must be verified.

Q: What is the difference between the TE Connectivity AMP and Aerospace variants? A: The AMPLIMITE HDP-20 (2-338314-2) and AMPLIMITE HD-20 (7-1393740-1) are commercial-grade connectors with RoHS compliance. The M24308/23-8F is a military-specification connector per MIL-DTL-24308 with extended temperature range (-55°C to 125°C), cadmium plating, and specified gold contact thickness. Military-grade connectors are RoHS non-compliant and subject to REACH regulations.

Q: Are all substitute parts available in the same packaging? A: No. The 628-015-220-047 is supplied in Tray packaging. Substitute parts are supplied in Bulk packaging: 2-338314-2, 7-1393740-1, and M24308/23-8F. Packaging format may affect procurement, storage, and handling procedures.

Q: Which substitute part is suitable for RoHS3 applications? A: The 628-015-220-047 (primary part) is ROHS3 compliant. The 2-338314-2 and 7-1393740-1 are RoHS compliant but not specifically ROHS3 certified. The M24308/23-8F is RoHS non-compliant. For applications requiring ROHS3 certification, the primary part is the specified option.

Q: What is the maximum operating temperature for each connector? A: 628-015-220-047: -55°C to 85°C. 2-338314-2: -55°C to 105°C. 7-1393740-1: Not specified. M24308/23-8F: -55°C to 125°C. Selection depends on application thermal requirements.

Q: Can the M24308/23-8F be used in commercial applications? A: The M24308/23-8F is a military-specification connector suitable for aerospace, defense, and marine applications. While mechanically and electrically compatible with the 628-015-220-047, its RoHS non-compliance and REACH Affected status may restrict use in commercial applications subject to RoHS or REACH regulations. Application regulatory requirements must be evaluated.