61PC5F Circular Connector Receptacle - Equivalent & Substitute Parts

Part Overview

The 61PC5F is a 5-position circular connector receptacle manufactured by Switchcraft Inc., designed for applications requiring female socket termination via solder. This DIN-standard connector features push-pull fastening, right-angle through-hole mounting, and shielded construction rated for 3A at 34VDC. The part is currently active in production with 803 units in stock. Substitute parts may be required due to inventory constraints, application-specific performance requirements, or procurement lead time considerations.

Substiute Parts

61PC5F

Switchcraft Inc.In Stock: 91261PC5F Datasheet

Current PartRFQ

SDS-50J

CUI DevicesIn Stock: 15764SDS-50J Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SDS-50J from CUI Devices is identified as a substitute for the 61PC5F based on the following core compatibility parameters:

Matching Parameters:

• Connector type: Receptacle, Female Sockets
• Number of positions: 5
• Mounting type: Through Hole, Right Angle
• Termination method: Solder
• Fastening type: Push-Pull
• Contact finish: Tin
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

Differing Parameters:

• Shell size insert: DIN (180 Degree) vs. DIN (240 Degree)
• Shielding: Unshielded vs. Shielded
• Current rating: 2A vs. 3A
• Voltage rating: 100VAC vs. 34VDC
• Operating temperature: -40°C ~ 85°C (specified vs. not specified)
• Shell material: Polybutylene Terephthalate (PBT) vs. not specified
• Color: Black vs. not specified

Substitution is valid when application requirements permit operation within the SDS-50J electrical and mechanical constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the 61PC5F and SDS-50J are active production parts with ROHS3 compliance and unlimited moisture sensitivity ratings, making them suitable for standard industrial applications. The 61PC5F provides shielded construction and higher current capacity (3A), appropriate for noise-sensitive or higher-power circuits. The SDS-50J offers significantly greater inventory availability (15654 units) and extended operating temperature range (-40°C ~ 85°C), supporting applications requiring thermal robustness or rapid procurement. Selection between these parts depends on whether shielding and current capacity requirements of the target application align with the SDS-50J specifications, or whether the 61PC5F's enhanced electrical performance is mandatory.

Frequently Asked Questions (FAQ)

Q: Can the SDS-50J directly replace the 61PC5F in all applications?

A: Direct replacement is valid only when the application operates within SDS-50J electrical limits: maximum 2A current and 100VAC voltage rating. The SDS-50J lacks shielding, making it unsuitable for EMI-sensitive circuits where the 61PC5F's shielded design is required.

Q: What is the significance of the DIN shell size difference (240 Degree vs. 180 Degree)?

A: Shell size insert angle determines the keying orientation and mating interface geometry. The 61PC5F uses 240-degree orientation while the SDS-50J uses 180-degree orientation with keyed design. These are mechanically incompatible; connectors will not mate across different angle specifications.

Q: Are both parts suitable for high-temperature environments?

A: The SDS-50J specifies operating temperature range of -40°C ~ 85°C. The 61PC5F does not provide operating temperature specification in available documentation. For applications requiring confirmed thermal performance, the SDS-50J's documented range provides explicit operating limits.

Q: What packaging considerations apply to these parts?

A: The 61PC5F is supplied in bulk packaging, while the SDS-50J is supplied in tray packaging. Tray packaging typically provides better component protection during storage and handling. Bulk packaging may require additional protective measures for long-term storage.

Q: Are both parts RoHS compliant?

A: Yes, both the 61PC5F and SDS-50J are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for industrial electronics manufacturing.