TE Connectivity AMP Connectors 619220-1 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 619220-1 is a 1.0/2.3 coaxial connector jack with female socket configuration, designed for 75 ohm RF applications. This connector features through-hole solder termination with bulkhead front-side nut mounting and operates across a frequency range up to 10 GHz. The product is classified as obsolete, necessitating identification of active equivalent components to maintain design continuity and ensure ongoing component availability for new production and field service applications.

Substiute Parts

619220-1

TE Connectivity AMP ConnectorsIn Stock: 700619220-1 Datasheet

Current PartRFQ

8-1393670-3

TE Connectivity AMP ConnectorsIn Stock: 11138-1393670-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 619220-1 connector is based on strict alignment of core electrical and mechanical parameters. The substitute part 8-1393670-3 maintains compatibility through the following critical parameters:

Electrical Compatibility Parameters:

• Connector style: 1.0/2.3 (identical mechanical interface)
• Connector type: Jack, female socket (identical mating configuration)
• Impedance: 75 ohms (identical RF characteristic)
• Dielectric material: Polytetrafluoroethylene (PTFE) (identical electrical properties)
• Center contact plating: Gold (identical contact interface)

Mechanical Compatibility Parameters:

• Contact termination: Solder (identical assembly method)
• Shield termination: Solder (identical assembly method)
• Mounting feature: Bulkhead - front side nut (identical mechanical interface)
• Number of ports: 1 (identical configuration)
• Mating cycles: 500 (identical mechanical durability rating)

Regulatory Compliance Parameters:

• RoHS compliance status: Both parts meet applicable RoHS requirements
• REACH status: Both parts are REACH affected
• ECCN classification: EAR99 (identical export control classification)

The substitute part 8-1393670-3 is classified as active product status, providing ongoing availability and manufacturing support.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 8-1393670-3 provides functional replacement for the obsolete 619220-1 connector in applications where the maximum frequency requirement does not exceed 2 GHz. Both connectors maintain identical 75 ohm impedance, 1.0/2.3 connector style, and solder termination specifications, ensuring mechanical and electrical compatibility at the interface level.

The substitute part carries active product status from TE Connectivity AMP Connectors, ensuring continued manufacturing support, quality assurance, and component availability. Both parts maintain ROHS3/RoHS compliance and REACH affected status, satisfying current regulatory requirements for electronic component procurement.

The primary design consideration is the frequency rating differential. The main part 619220-1 is rated to 10 GHz, while the substitute 8-1393670-3 is rated to 2 GHz. Applications operating below 2 GHz maximum frequency can utilize the substitute without performance degradation. Applications requiring operation above 2 GHz must retain the original 619220-1 specification or identify alternative components rated for the required frequency range.

The center contact material differs between parts: brass in the main part versus beryllium copper and bronze in the substitute. Both materials provide gold plating and maintain the specified 500 mating cycle rating. The contact material change does not affect the 75 ohm impedance or PTFE dielectric performance.

Frequently Asked Questions (FAQ)

Q: Can the 8-1393670-3 substitute directly replace the 619220-1 in all applications?

A: Direct substitution is limited by frequency rating. The 8-1393670-3 is rated to 2 GHz maximum frequency, while the 619220-1 is rated to 10 GHz. Substitution is valid only for applications operating at or below 2 GHz. Applications requiring 10 GHz operation must use the original 619220-1 specification or identify alternative components rated for higher frequencies.

Q: Are the mechanical interfaces identical between these connectors?

A: Yes. Both connectors use the 1.0/2.3 connector style with identical jack female socket configuration, bulkhead front-side nut mounting feature, and solder termination for both contact and shield. The mechanical interface is fully compatible.

Q: What is the impedance specification for both connectors?

A: Both connectors are specified at 75 ohms impedance, maintaining identical RF characteristics for applications within the frequency rating of each part.

Q: Do both connectors meet current regulatory requirements?

A: Yes. The 619220-1 is ROHS3 compliant, and the 8-1393670-3 is RoHS compliant. Both parts are REACH affected and carry EAR99 export control classification. Both satisfy current regulatory requirements for electronic component procurement.

Q: What is the difference in center contact material between these parts?

A: The 619220-1 uses brass center contact material, while the 8-1393670-3 uses beryllium copper and bronze. Both materials are gold plated and maintain the specified 500 mating cycle rating. The material difference does not affect the 75 ohm impedance or PTFE dielectric performance.

Q: Why is the 619220-1 classified as obsolete?

A: The 619220-1 is classified as obsolete by TE Connectivity AMP Connectors. The active substitute 8-1393670-3 provides ongoing manufacturing support and component availability for new production and field service applications.

Q: Are the operating temperature ranges specified for both connectors?

A: The 619220-1 is specified for -40°C to 85°C operating temperature. The 8-1393670-3 does not include operating temperature specification in the provided technical data.

Q: What is the mating cycle rating for both connectors?

A: Both connectors are rated for 500 mating cycles, indicating identical mechanical durability specifications.

Q: Can these connectors be used interchangeably in PCB applications?

A: Both connectors support through-hole solder termination and bulkhead mounting, enabling PCB integration. Interchangeability is subject to the frequency rating limitation noted above.