SCHURTER 6167.0014 IEC 320-C16 Power Entry Connector Receptacle Equivalent & Substitute Parts

Part Overview

The SCHURTER 6167.0014 is a power entry connector receptacle designed for IEC 320-C16 applications with male blades, panel mount snap-in configuration. This component operates at 10A, 250VAC and accommodates three positions with quick connect termination. The product is classified as obsolete, necessitating identification of active equivalent components that maintain electrical and mechanical compatibility for continued system integration and procurement.

Substiute Parts

6167.0014

SCHURTER Inc.In Stock: 11906167.0014 Datasheet

Current PartRFQ

708-20/63

QualtekIn Stock: 950708-20/63 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 6167.0014 is determined by strict equivalence across the following critical parameters:

• Connector Style & Type: IEC 320-C16 receptacle with male blades
• Electrical Ratings: 10A at 250VAC minimum
• Mechanical Configuration: Panel mount, snap-in installation
• Termination Interface: Quick connect 0.250" (6.3mm) terminals
• Position Count: Three-position configuration
• Filter Classification: Unfiltered commercial grade
• Regulatory Compliance: UL and VDE certifications required

The Qualtek 708-20/63 meets all substitution criteria, providing functional and electrical equivalence while offering active product status and current availability.

Parameter Comparison

Engineering Selection Recommendations

The Qualtek 708-20/63 is a direct functional equivalent to the SCHURTER 6167.0014 for IEC 320-C16 power entry applications. Both components share identical electrical specifications (10A, 250VAC), connector configuration, and termination interface. The Qualtek part maintains active product status with current manufacturing and inventory availability, addressing the obsolescence of the SCHURTER component.

Both parts carry UL and VDE regulatory approvals and ROHS3 compliance, satisfying standard industrial safety and environmental requirements. The panel cutout dimensions differ marginally (27.70mm vs. 27.40mm width), and panel thickness tolerance varies (3.00mm vs. 2.00mm), requiring verification against specific panel installation specifications during integration.

Frequently Asked Questions (FAQ)

Q: Can the Qualtek 708-20/63 directly replace the SCHURTER 6167.0014 in existing applications?

A: Yes, the Qualtek 708-20/63 provides electrical and functional equivalence. Both components operate at identical current and voltage ratings with matching connector styles, termination interfaces, and mounting configurations. Panel cutout dimensions and thickness tolerances must be confirmed for mechanical fit.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution requires equivalence in connector style (IEC 320-C16), connector type (receptacle with male blades), current rating (10A), voltage rating (250VAC), position count (3), mounting method (panel mount snap-in), and termination type (quick connect 0.250"). Filter classification and regulatory certifications must also align.

Q: Are there differences in regulatory approvals between these parts?

A: The SCHURTER part carries cCSAus, UL, and VDE approvals. The Qualtek part carries CSA, UL, and VDE approvals. Both maintain UL and VDE certifications. The cCSAus versus CSA distinction reflects regional certification scope; both satisfy North American and European regulatory frameworks.

Q: What mechanical considerations apply to panel installation?

A: Panel cutout dimensions differ slightly: SCHURTER requires 27.70mm x 19.80mm, while Qualtek requires 27.40mm x 19.80mm. Panel thickness tolerance also differs: SCHURTER accommodates 0.118" (3.00mm), Qualtek accommodates 0.079" (2.00mm). Existing panel cutouts must be evaluated for compatibility with the selected component.

Q: Do both parts meet environmental and compliance standards?

A: Both components are ROHS3 compliant and REACH unaffected. Both carry EAR99 ECCN classification and identical HTSUS codes (8536.69.4030), confirming equivalent regulatory and environmental status.