TE Connectivity AMP Connectors 6-146256-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 6-146256-5 is a rectangular connector header designed for through-hole mounting applications. This vertical 30-position connector operates within the AMPMODU Mod II series and is classified as an active product. The connector features a 0.100" (2.54mm) pitch configuration with dual-row layout, suitable for board-to-board or cable interconnection. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part becomes unavailable or inventory constraints require alternative sourcing.

Substiute Parts

6-146256-5

TE Connectivity AMP ConnectorsIn Stock: 12706-146256-5 Datasheet

Current PartRFQ

0010897302

MolexIn Stock: 15790010897302 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 6-146256-5 are identified based on strict alignment of electrical and mechanical parameters. The following criteria determine substitution eligibility:

Primary Matching Parameters:

• Connector type classification (Header, Breakaway)
• Contact type (Male Pin)
• Position count (30 positions)
• Row configuration (2 rows)
• Mating pitch (0.100" / 2.54mm)
• Row spacing (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Termination type (Solder)
• Fastening mechanism (Push-Pull)
• Shrouding configuration (Unshrouded)
• Contact material (Copper Alloy)
• Contact finish specifications (Gold mating surface, Tin post)
• Insulation material (Liquid Crystal Polymer)
• Insulation color (Black)
• Flammability compliance (UL94 V-0)
• Moisture sensitivity classification (MSL 1)

The Molex 0010897302 connector satisfies all primary matching parameters and qualifies as a direct substitute for the TE Connectivity 6-146256-5.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 6-146256-5 and Molex 0010897302 connectors are classified as active products with current manufacturing support. Selection between these parts is based on the following engineering considerations:

TE Connectivity 6-146256-5:

• RoHS Compliant certification
• Current rating specified at 3A
• Operating temperature range: -65°C ~ 105°C
• Contact finish thickness on post: 100.0µin (2.54µm)
• AMPMODU Mod II series designation

Molex 0010897302:

• ROHS3 Compliant certification (enhanced RoHS compliance)
• REACH Unaffected status documented
• Contact finish thickness on post: 74.8µin (1.90µm)
• C-Grid 70280 series designation
• Insulation material includes glass-filled LCP formulation

Both connectors satisfy UL94 V-0 flammability requirements, MSL 1 moisture sensitivity classification, and EAR99 export control designation. The Molex part provides enhanced regulatory documentation through ROHS3 compliance and explicit REACH status confirmation. Contact length variations between the two parts are minimal (0.003" / 0.08mm difference in overall length), and both maintain identical mating pitch, row spacing, and insulation height specifications.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0010897302 directly replace the TE Connectivity 6-146256-5 in existing designs?

A: Yes. Both connectors share identical mating pitch (0.100" / 2.54mm), row spacing (0.100" / 2.54mm), position count (30), row configuration (2), contact type (Male Pin), mounting method (Through Hole), and termination type (Solder). The overall contact length difference is 0.003" (0.08mm), which falls within typical PCB design tolerances for through-hole applications.

Q: What are the key differences between these two connectors?

A: The primary differences are: (1) Manufacturer series designation (AMPMODU Mod II versus C-Grid 70280); (2) Contact length specifications (mating contact 0.230" versus 0.240", post contact 0.120" versus 0.107"); (3) Contact finish thickness on post (100.0µin versus 74.8µin); (4) Insulation material formulation (standard LCP versus glass-filled LCP); (5) Regulatory compliance documentation (RoHS Compliant versus ROHS3 Compliant with REACH status).

Q: Are there any current rating differences between these connectors?

A: The TE Connectivity 6-146256-5 specifies a current rating of 3A. The Molex 0010897302 does not provide a current rating specification in the available documentation. Design applications requiring explicit current rating verification should reference the TE Connectivity part or contact the Molex manufacturer for current rating confirmation.

Q: Do both connectors meet the same environmental and compliance standards?

A: Both connectors meet UL94 V-0 flammability requirements, operate within MSL 1 (Unlimited) moisture sensitivity classification, and carry EAR99 export control designation. The Molex part provides additional regulatory documentation through ROHS3 Compliant certification and explicit REACH Unaffected status, whereas the TE Connectivity part is RoHS Compliant.

Q: What is the significance of the glass-filled LCP insulation material in the Molex connector?

A: The glass-filled LCP formulation in the Molex 0010897302 provides enhanced mechanical strength and dimensional stability compared to standard LCP. Both materials maintain identical insulation height (0.090" / 2.29mm) and black color specification, ensuring mechanical compatibility in PCB mounting applications.

Q: Are these connectors suitable for automotive applications?

A: The Molex 0010897302 documentation explicitly lists automotive applications. The TE Connectivity 6-146256-5 does not specify application categories in the available data. Both connectors meet UL94 V-0 flammability standards and operate across the -65°C ~ 105°C temperature range, supporting general industrial and automotive thermal requirements.

Q: What packaging format is available for these connectors?

A: Both connectors are supplied in bulk packaging. Current inventory availability: TE Connectivity 6-146256-5 (1192 pieces), Molex 0010897302 (1551 pieces).