TE Connectivity AMP Connectors 6-1437012-1 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 6-1437012-1 is a 15 Position D-Sub Receptacle connector with female sockets, designed for IDC (Insulation Displacement Contact) termination on ribbon cable applications. This D-shaped connector is commonly used in data communication, industrial control, and legacy computing equipment where standardized D-Sub connectivity is required. The part is currently in active inventory status with 1143 pieces available as new original stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, allowing for component interchangeability in applications where the original part number becomes unavailable or when alternative packaging configurations are preferred.

Substiute Parts

6-1437012-1

TE Connectivity AMP ConnectorsIn Stock: 12236-1437012-1 Datasheet

Current PartRFQ

1658614-3

TE Connectivity AMP ConnectorsIn Stock: 11211658614-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 6-1437012-1 are identified based on strict equivalence of the following critical parameters:

Electrical Equivalence Criteria:

• Connector type: Receptacle with female sockets
• Number of positions: 15
• Number of rows: 2
• Shell size and layout: 2 (DA, A)
• Contact type: Signal
• Current rating: 1.25A
• Contact finish: Gold with 30.0µin thickness
• Wire gauge compatibility: 26-28 AWG, Stranded or Solid

Mechanical Equivalence Criteria:

• Termination method: IDC, Ribbon Cable
• Mounting type: Free Hanging (In-Line)
• Operating temperature range: -55°C ~ 105°C
• Contact material: Phosphor Bronze
• Dielectric material: Thermoplastic
• Flange feature: Housing/Shell (Unthreaded)

Compliance and Material Criteria:

• Material flammability rating: UL94 V-0
• RoHS status: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Parts meeting all these parameters are classified as direct substitutes and are electrically and mechanically interchangeable in the same application circuit.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 1658614-3 is a direct electrical and mechanical substitute for the 6-1437012-1. Both parts are manufactured by TE Connectivity AMP Connectors and maintain identical specifications across all critical parameters including connector type, position count, shell size, termination method, contact materials, and operating characteristics.

Compliance Status: Both parts are ROHS3 compliant and carry UL94 V-0 material flammability ratings, meeting current regulatory requirements for electronic component applications. Both parts maintain active product status with TE Connectivity, ensuring continued availability and support.

Packaging Consideration: The primary difference between these parts is packaging configuration. The 1658614-3 is supplied in bulk packaging, while the 6-1437012-1 packaging specification is not provided. This distinction does not affect electrical or mechanical performance and relates only to order quantity and handling requirements.

Series Designation: The 1658614-3 is designated as part of the AMPLIMITE HDF-20 series. This series designation does not indicate a functional difference but rather a product line classification within TE Connectivity's connector portfolio.

Both parts are suitable for direct substitution in D-Sub receptacle applications requiring 15-position IDC ribbon cable termination with gold-plated contacts and operating temperatures from -55°C to 105°C.

Frequently Asked Questions (FAQ)

Q: Can the 1658614-3 be used as a direct replacement for the 6-1437012-1 in existing designs?

A: Yes. The 1658614-3 is electrically and mechanically equivalent to the 6-1437012-1. All critical parameters including connector type, position count, shell size, termination method, contact specifications, and operating temperature range are identical. Direct substitution is supported without design modification.

Q: What is the difference between these two part numbers?

A: The parts are functionally identical. The documented differences are packaging configuration (bulk for 1658614-3 versus unspecified for 6-1437012-1) and series designation (AMPLIMITE HDF-20 for 1658614-3). These differences do not affect electrical performance or mechanical compatibility.

Q: Are both parts RoHS compliant?

A: Yes. Both the 6-1437012-1 and 1658614-3 are ROHS3 compliant and carry UL94 V-0 material flammability ratings.

Q: What wire gauges are compatible with these connectors?

A: Both connectors accept 26-28 AWG wire, either stranded or solid conductor. This specification applies to IDC ribbon cable termination.

Q: What is the current rating for these D-Sub receptacles?

A: Both parts are rated for 1.25A per contact. This rating applies to signal contacts in the 15-position configuration.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across the temperature range of -55°C to 105°C, suitable for industrial and commercial applications.

Q: Are these connectors suitable for high-reliability applications?

A: Both parts meet UL94 V-0 flammability requirements and maintain moisture sensitivity level 1 (unlimited shelf life). The gold-plated contacts with 30.0µin thickness provide corrosion resistance. Suitability for specific high-reliability applications depends on application-specific requirements beyond these standard specifications.

Q: What is the difference between the AMPLIMITE HDF-20 series designation and the unspecified series for the main part?

A: The series designation indicates product line classification within TE Connectivity's connector portfolio. The AMPLIMITE HDF-20 series is a specific product line within TE Connectivity's D-Sub connector offerings. The absence of a series designation for the 6-1437012-1 does not indicate a functional difference; both parts meet identical electrical and mechanical specifications.

Q: Can these connectors be used for applications other than ribbon cable termination?

A: These connectors are specifically designed for IDC (Insulation Displacement Contact) termination on ribbon cable. Use with other termination methods or cable types is outside the specified parameters for these parts.