TE Connectivity Potter & Brumfield Relay 6-1393236-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Potter & Brumfield Relay 6-1393236-8 is a general purpose SPDT (Single Pole Double Throw) relay with a 5VDC coil, rated for 6A contact current at 400VAC maximum switching voltage. This through-hole mounted relay operates with a 34mA coil current and features a sealed, fully enclosed design with silver tin oxide contacts. The part is currently active in production status with 871 pieces available in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the original part number is unavailable, supply chain constraints exist, or inventory optimization is necessary. Substitutes must maintain identical functional specifications across all critical operating parameters.

Substiute Parts

6-1393236-8

TE Connectivity Potter & Brumfield RelaysIn Stock: 8846-1393236-8 Datasheet

Current PartRFQ

V23092A1905A301

TE Connectivity Potter & Brumfield RelaysIn Stock: 4144V23092A1905A301 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 6-1393236-8 relay is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Coil voltage: 5VDC
• Contact form: SPDT (1 Form C)
• Contact current rating: 6A
• Switching voltage: 400VAC maximum
• Coil current: 34mA
• Coil resistance: 147 Ohms
• Must operate voltage: 3.5VDC
• Must release voltage: 0.25VDC
• Operate time: 12ms
• Release time: 5ms

Mechanical Parameters:

• Mounting type: Through hole
• Termination style: PC pin
• Seal rating: Sealed - fully
• Contact material: Silver tin oxide (AgSnO)
• Operating temperature range: -40°C to 85°C

Compliance Parameters:

• RoHS3 compliance
• ECCN: EAR99
• HTSUS: 8536.41.0020

Parts meeting all specified parameters within these categories are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both the 6-1393236-8 and V23092A1905A301 are active production parts manufactured by TE Connectivity Potter & Brumfield Relays. All electrical, mechanical, and functional parameters are identical between the two part numbers. Both parts maintain ROHS3 compliance and carry identical ECCN and HTSUS classifications.

The V23092A1905A301 substitute part is a direct parametric equivalent suitable for applications requiring the 6-1393236-8. Selection between these parts may be based on inventory availability, supply chain considerations, or procurement requirements. The substitute part carries higher current inventory levels (4071 pieces versus 871 pieces), which may provide supply chain advantages in high-volume applications.

Both parts are classified as general purpose relays within the SNR and SCHRACK series and are suitable for identical circuit applications without modification to PCB layouts, connector interfaces, or electrical designs.

Frequently Asked Questions (FAQ)

Q: Can V23092A1905A301 be used as a direct replacement for 6-1393236-8 in existing designs?

A: Yes. The V23092A1905A301 is a parametric equivalent with identical electrical specifications, contact ratings, coil voltage, mounting type, and termination style. No circuit modifications or PCB redesign is required.

Q: Are the physical dimensions and pin configurations identical?

A: Both parts share identical mounting type (through hole), termination style (PC pin), and series designation (SNR, SCHRACK). The parts are mechanically compatible for direct substitution on existing PCB layouts.

Q: What is the difference between these two part numbers?

A: The part numbers represent different internal designations within the TE Connectivity product line. All functional and electrical parameters are identical. The primary difference is inventory availability and REACH compliance status.

Q: Do both parts meet the same compliance standards?

A: Both parts are ROHS3 compliant and carry identical ECCN (EAR99) and HTSUS (8536.41.0020) classifications. The V23092A1905A301 is REACH affected, while the 6-1393236-8 is REACH unaffected.

Q: What is the coil resistance and operating current for these relays?

A: Both relays have a coil resistance of 147 Ohms and require 34mA coil current at 5VDC. The must-operate voltage is 3.5VDC and must-release voltage is 0.25VDC.

Q: What contact ratings apply to these relays?

A: Both relays are rated for 6A contact current with a maximum switching voltage of 400VAC. Contact material is silver tin oxide (AgSnO) in both cases.

Q: Are these relays suitable for sealed or harsh environments?

A: Yes. Both relays feature sealed, fully enclosed designs suitable for applications requiring environmental protection. Operating temperature range is -40°C to 85°C for both parts.

Q: What is the switching speed of these relays?

A: Both relays have an operate time of 12ms and release time of 5ms, providing consistent switching performance for general purpose applications.