TE Connectivity AMP Connectors 6-1377173-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 6-1377173-7 is a ring terminal connector designed for circular stud applications in 16-22 AWG wire gauge configurations. This insulated crimp terminal features a 6 stud mounting interface with serrated termination for secure wire attachment. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity and ensure long-term component availability for new designs and field replacements.

Substiute Parts

6-1377173-7

TE Connectivity AMP ConnectorsIn Stock: 7446-1377173-7 Datasheet

Current PartRFQ

8-36150-1

TE Connectivity AMP ConnectorsIn Stock: 11178-36150-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete 6-1377173-7 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part 8-36150-1 maintains identical specifications in the following key areas:

Terminal configuration (circular, 6 stud), wire gauge compatibility (16-22 AWG), crimp termination method, insulation material (Polyamide/Nylon), contact material and finish (Copper with Tin plating), and all physical dimensions (thickness, width, length, and insulation diameter). Both parts operate within the same series designation (PIDG) and share identical mounting characteristics (free hanging, in-line configuration).

The primary distinction between these parts is product status: the original part is obsolete, while the substitute is active. Additionally, the substitute part carries ROHS3 compliance certification compared to the original RoHS compliance designation, and is available in bulk packaging versus the original specification.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 8-36150-1 is the direct equivalent for the obsolete 6-1377173-7. Selection of the substitute part is based on the following engineering criteria:

Product Status: The substitute part maintains active product status, ensuring continued availability and manufacturer support. The original part is obsolete and subject to discontinuation of supply.

Compliance Certifications: The substitute part carries ROHS3 compliance, which supersedes the original RoHS compliance designation. This enhanced compliance status satisfies current regulatory requirements for electronic components in restricted substance applications.

Electrical and Mechanical Equivalence: All functional parameters are identical between the original and substitute parts. The circular terminal configuration, 6 stud interface, 16-22 AWG wire gauge capacity, crimp termination method, copper-tin contact system, and polyamide insulation material are preserved without modification.

Moisture Sensitivity: Both parts maintain MSL 1 (Unlimited) classification, indicating no moisture sensitivity constraints during storage or handling.

For new designs and field replacements, the 8-36150-1 substitute part provides full functional compatibility with the original 6-1377173-7 specification while ensuring long-term component availability and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the 8-36150-1 substitute part be used as a direct replacement for the 6-1377173-7 in existing applications?

A: Yes. The substitute part 8-36150-1 is electrically and mechanically equivalent to the original 6-1377173-7. All critical parameters including terminal type, stud size, wire gauge range, termination method, contact material, and physical dimensions are identical. Direct substitution is supported without circuit or assembly modifications.

Q: What is the primary reason for substitution?

A: The original part 6-1377173-7 is classified as obsolete. The substitute part 8-36150-1 is active and maintains full manufacturer support and supply availability. Substitution ensures continuity of component supply for new designs and field service applications.

Q: Are there any compliance differences between the original and substitute parts?

A: The substitute part 8-36150-1 carries ROHS3 compliance certification, which represents an enhanced compliance status compared to the original RoHS compliance designation. Both parts meet current regulatory requirements for restricted substance use in electronic components.

Q: Does the packaging format affect electrical or mechanical performance?

A: No. The substitute part is supplied in bulk packaging, while the original part packaging is not specified. Packaging format does not affect the electrical characteristics, mechanical dimensions, or functional performance of the terminal connector itself.

Q: Are the wire gauge and insulation diameter specifications identical?

A: Yes. Both parts accommodate 16-22 AWG wire gauge and maintain identical insulation diameter specifications of 0.105" to 0.140" (2.67mm to 3.56mm). Wire termination compatibility is fully preserved.

Q: What is the contact material and finish specification for both parts?

A: Both the original 6-1377173-7 and substitute 8-36150-1 feature copper contact material with tin plating finish. This specification ensures consistent electrical conductivity and corrosion resistance across both parts.

Q: Is the serrated termination feature present on the substitute part?

A: Yes. The substitute part 8-36150-1 retains the serrated termination feature of the original 6-1377173-7, ensuring equivalent wire retention and mechanical security during crimp termination.

Q: What is the moisture sensitivity level for the substitute part?

A: The substitute part 8-36150-1 maintains MSL 1 (Unlimited) classification, identical to the original part. This indicates no moisture sensitivity constraints during storage, handling, or field deployment.