TE Connectivity AMP Connectors 6-1337604-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 6-1337604-0 is an SMB Connector Jack with male pin configuration, designed for 50 Ohm coaxial RF applications. This surface mount solder termination connector operates across a frequency range up to 4 GHz and is part of the Greenpar series. The component maintains Active product status and is RoHS Compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

6-1337604-0

TE Connectivity AMP ConnectorsIn Stock: 7636-1337604-0 Datasheet

Current PartRFQ

1-1337604-0

TE Connectivity AMP ConnectorsIn Stock: 21821-1337604-0 Datasheet

Parametric EquivalentRFQ

131-3711-201

Cinch Connectivity Solutions JohnsonIn Stock: 11500131-3711-201 Datasheet

Parametric EquivalentRFQ

R114424000

Radiall USA, Inc.In Stock: 2299R114424000 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 6-1337604-0 is determined by strict alignment of the following critical parameters:

Electrical Parameters:

• Connector Style: SMB
• Connector Type: Jack, Male Pin
• Impedance: 50 Ohms
• Frequency - Max: 4 GHz
• Operating Temperature Range: -65°C ~ 165°C
• Dielectric Material: Polytetrafluoroethylene (PTFE)

Mechanical Parameters:

• Mounting Type: Surface Mount
• Contact Termination: Solder
• Shield Termination: Solder
• Fastening Type: Snap-On
• Number of Ports: 1
• Mating Cycles: 500

All identified substitute parts maintain these core parameters, ensuring functional and mechanical compatibility in RF coaxial connector applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Equivalent: 1-1337604-0 (TE Connectivity AMP Connectors)

The 1-1337604-0 represents a direct parametric equivalent from the same manufacturer and series. This part maintains identical electrical and mechanical specifications with the main part 6-1337604-0. The 1-1337604-0 carries ROHS3 Compliant status and REACH Affected designation, providing enhanced regulatory documentation compared to the main part's Vendor Undefined REACH status. Inventory availability is 2100 pieces.

Secondary Equivalent: 131-3711-201 (Cinch Connectivity Solutions Johnson)

The 131-3711-201 is a cross-manufacturer substitute from Cinch Connectivity Solutions Johnson. All core electrical and mechanical parameters align with the main part. This part carries ROHS3 Compliant and REACH Affected certifications. The voltage rating is elevated to 335 V compared to the main part's 250 V specification. Insertion loss data is not specified for this part. Inventory availability is 11445 pieces.

Tertiary Equivalent: R114424000 (Radiall USA, Inc.)

The R114424000 is a cross-manufacturer substitute from Radiall USA, Inc. All core electrical and mechanical parameters align with the main part. This part carries ROHS3 Compliant and REACH Affected certifications. The voltage rating is elevated to 500 V compared to the main part's 250 V specification. Insertion loss data is not specified for this part. Inventory availability is 2238 pieces.

All substitute parts maintain Active product status and comply with the same ECCN (EAR99) and HTSUS (8536.69.4010) classifications as the main part.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the 6-1337604-0?

A: Substitution is based on matching core electrical parameters (SMB connector style, Jack Male Pin type, 50 Ohm impedance, 4 GHz maximum frequency, PTFE dielectric) and mechanical parameters (surface mount solder termination, snap-on fastening, 500 mating cycles, single port configuration, operating temperature -65°C to 165°C).

Q: Can I use the 131-3711-201 or R114424000 in place of the 6-1337604-0?

A: Yes. Both parts maintain all critical electrical and mechanical parameters. The 131-3711-201 and R114424000 feature higher voltage ratings (335 V and 500 V respectively) compared to the main part's 250 V rating, which does not restrict substitution in applications designed for the lower voltage specification.

Q: What is the difference between the 6-1337604-0 and 1-1337604-0?

A: Both parts are from TE Connectivity AMP Connectors and share identical electrical and mechanical specifications. The primary difference is regulatory compliance documentation: the 1-1337604-0 carries explicit ROHS3 Compliant and REACH Affected designations, while the 6-1337604-0 lists REACH status as Vendor Undefined.

Q: Are all substitute parts surface mount solder termination connectors?

A: Yes. All identified substitutes use surface mount solder termination for both contact and shield, matching the main part's configuration.

Q: What is the maximum operating frequency for these connectors?

A: All parts, including the main part and all substitutes, are rated for a maximum frequency of 4 GHz.

Q: Do all parts have the same moisture sensitivity level?

A: Yes. The main part and all substitute parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions.

Q: Which substitute has the highest inventory availability?

A: The 131-3711-201 from Cinch Connectivity Solutions Johnson has the highest inventory with 11445 pieces in stock.

Q: Are there differences in insertion loss between the parts?

A: The main part 6-1337604-0 and the 1-1337604-0 both specify 0.3 dB insertion loss. The 131-3711-201 and R114424000 do not provide insertion loss specifications in the available data.